[alsa-devel] [PATCH 1/2] ASoC: fsl ssi doc: Move 'fsl, ssi-asynchronous' to the optional section

[Fabio Estevam]

Property 'fsl,ssi-asynchronous' is optional, so move it to the optional
section of the document.

Signed-off-by: Fabio Estevam <fabio.estevam at nxp.com>
---
 Documentation/devicetree/bindings/sound/fsl,ssi.txt | 20 ++++++++++----------
 1 file changed, 10 insertions(+), 10 deletions(-)

diff --git a/Documentation/devicetree/bindings/sound/fsl,ssi.txt b/Documentation/devicetree/bindings/sound/fsl,ssi.txt
index 5b76be4..1d292d7 100644
--- a/Documentation/devicetree/bindings/sound/fsl,ssi.txt
+++ b/Documentation/devicetree/bindings/sound/fsl,ssi.txt
@@ -28,16 +28,6 @@ Required properties:
                     by SOC design.  See the notes below.
 - fsl,fifo-depth:   The number of elements in the transmit and receive FIFOs.
                     This number is the maximum allowed value for SFCSR[TFWM0].
-- fsl,ssi-asynchronous:
-                    If specified, the SSI is to be programmed in asynchronous
-                    mode.  In this mode, pins SRCK, STCK, SRFS, and STFS must
-                    all be connected to valid signals.  In synchronous mode,
-                    SRCK and SRFS are ignored.  Asynchronous mode allows
-                    playback and capture to use different sample sizes and
-                    sample rates.  Some drivers may require that SRCK and STCK
-                    be connected together, and SRFS and STFS be connected
-                    together.  This would still allow different sample sizes,
-                    but not different sample rates.
  - clocks:          "ipg" - Required clock for the SSI unit
                     "baud" - Required clock for SSI master mode. Otherwise this
 		      clock is not used
@@ -61,6 +51,16 @@ Optional properties:
 - fsl,mode:         The operating mode for the AC97 interface only.
                     "ac97-slave" - AC97 mode, SSI is clock slave
                     "ac97-master" - AC97 mode, SSI is clock master
+- fsl,ssi-asynchronous:
+                    If specified, the SSI is to be programmed in asynchronous
+                    mode.  In this mode, pins SRCK, STCK, SRFS, and STFS must
+                    all be connected to valid signals.  In synchronous mode,
+                    SRCK and SRFS are ignored.  Asynchronous mode allows
+                    playback and capture to use different sample sizes and
+                    sample rates.  Some drivers may require that SRCK and STCK
+                    be connected together, and SRFS and STFS be connected
+                    together.  This would still allow different sample sizes,
+                    but not different sample rates.
 
 Child 'codec' node required properties:
 - compatible:       Compatible list, contains the name of the codec
-- 
2.7.4