[alsa-devel] [PATCH 05/10] ASoC: Intel: Skylake: Add D0iX callbacks
Vinod Koul
vinod.koul at intel.com
Mon Sep 26 07:35:32 CEST 2016
From: Jayachandran B <jayachandran.b at intel.com>
The driver needs two DSP callback, one to set D0i0 (active) and D0i3
(low-power) states.
Add these callbacks in dsp ops and implement them for broxton platforms.
Signed-off-by: Jayachandran B <jayachandran.b at intel.com>
Signed-off-by: Vinod Koul <vinod.koul at intel.com>
---
sound/soc/intel/skylake/bxt-sst.c | 140 ++++++++++++++++++++++++++++++++++
sound/soc/intel/skylake/skl-sst-dsp.h | 12 +++
sound/soc/intel/skylake/skl-sst-ipc.h | 19 +++++
3 files changed, 171 insertions(+)
diff --git a/sound/soc/intel/skylake/bxt-sst.c b/sound/soc/intel/skylake/bxt-sst.c
index 1d251d59bcb9..fed818fe2e69 100644
--- a/sound/soc/intel/skylake/bxt-sst.c
+++ b/sound/soc/intel/skylake/bxt-sst.c
@@ -43,6 +43,9 @@
#define BXT_ADSP_FW_BIN_HDR_OFFSET 0x2000
+/* Delay before scheduling D0i3 entry */
+#define BXT_D0I3_DELAY 5000
+
static unsigned int bxt_get_errorcode(struct sst_dsp *ctx)
{
return sst_dsp_shim_read(ctx, BXT_ADSP_ERROR_CODE);
@@ -288,6 +291,141 @@ sst_load_base_firmware_failed:
return ret;
}
+/*
+ * Decide the D0i3 state that can be targeted based on the usecase
+ * ref counts and DSP state
+ *
+ * Decision Matrix: (X= dont care; state = target state)
+ *
+ * DSP state != SKL_DSP_RUNNING ; state = no d0i3
+ *
+ * DSP state == SKL_DSP_RUNNING , the following matrix applies
+ * non_d0i3 >0; streaming =X; non_streaming =X; state = no d0i3
+ * non_d0i3 =X; streaming =0; non_streaming =0; state = no d0i3
+ * non_d0i3 =0; streaming >0; non_streaming =X; state = streaming d0i3
+ * non_d0i3 =0; streaming =0; non_streaming =X; state = non-streaming d0i3
+ */
+static int bxt_d0i3_target_state(struct sst_dsp *ctx)
+{
+ struct skl_sst *skl = ctx->thread_context;
+ struct skl_d0i3_data *d0i3 = &skl->d0i3;
+
+ if (skl->cores.state[SKL_DSP_CORE0_ID] != SKL_DSP_RUNNING)
+ return SKL_DSP_D0I3_NONE;
+
+ if (d0i3->non_d0i3)
+ return SKL_DSP_D0I3_NONE;
+ else if (d0i3->streaming)
+ return SKL_DSP_D0I3_STREAMING;
+ else if (d0i3->non_streaming)
+ return SKL_DSP_D0I3_NON_STREAMING;
+ else
+ return SKL_DSP_D0I3_NONE;
+}
+
+static void bxt_set_dsp_D0i3(struct work_struct *work)
+{
+ int ret;
+ struct skl_ipc_d0ix_msg msg;
+ struct skl_sst *skl = container_of(work,
+ struct skl_sst, d0i3.work.work);
+ struct sst_dsp *ctx = skl->dsp;
+ struct skl_d0i3_data *d0i3 = &skl->d0i3;
+ int target_state;
+
+ dev_dbg(ctx->dev, "In %s:\n", __func__);
+
+ /* D0i3 entry allowed only if core 0 alone is running */
+ if (skl_dsp_get_enabled_cores(ctx) != SKL_DSP_CORE0_MASK) {
+ dev_warn(ctx->dev,
+ "D0i3 allowed when only core0 running:Exit\n");
+ return;
+ }
+
+ target_state = bxt_d0i3_target_state(ctx);
+ if (target_state == SKL_DSP_D0I3_NONE)
+ return;
+
+ msg.instance_id = 0;
+ msg.module_id = 0;
+ msg.wake = 1;
+ msg.streaming = 0;
+ if (target_state == SKL_DSP_D0I3_STREAMING)
+ msg.streaming = 1;
+
+ ret = skl_ipc_set_d0ix(&skl->ipc, &msg);
+
+ if (ret < 0) {
+ dev_err(ctx->dev, "Failed to set DSP to D0i3 state\n");
+ return;
+ }
+
+ /* Set Vendor specific register D0I3C.I3 to enable D0i3*/
+ if (skl->update_d0i3c)
+ skl->update_d0i3c(skl->dev, true);
+
+ d0i3->state = target_state;
+ skl->cores.state[SKL_DSP_CORE0_ID] = SKL_DSP_RUNNING_D0I3;
+}
+
+static int bxt_schedule_dsp_D0i3(struct sst_dsp *ctx)
+{
+ struct skl_sst *skl = ctx->thread_context;
+ struct skl_d0i3_data *d0i3 = &skl->d0i3;
+
+ /* Schedule D0i3 only if the usecase ref counts are appropriate */
+ if (bxt_d0i3_target_state(ctx) != SKL_DSP_D0I3_NONE) {
+
+ dev_dbg(ctx->dev, "%s: Schedule D0i3\n", __func__);
+
+ schedule_delayed_work(&d0i3->work,
+ msecs_to_jiffies(BXT_D0I3_DELAY));
+ }
+
+ return 0;
+}
+
+static int bxt_set_dsp_D0i0(struct sst_dsp *ctx)
+{
+ int ret;
+ struct skl_ipc_d0ix_msg msg;
+ struct skl_sst *skl = ctx->thread_context;
+
+ dev_dbg(ctx->dev, "In %s:\n", __func__);
+
+ /* First Cancel any pending attempt to put DSP to D0i3 */
+ cancel_delayed_work_sync(&skl->d0i3.work);
+
+ /* If DSP is currently in D0i3, bring it to D0i0 */
+ if (skl->cores.state[SKL_DSP_CORE0_ID] != SKL_DSP_RUNNING_D0I3)
+ return 0;
+
+ dev_dbg(ctx->dev, "Set DSP to D0i0\n");
+
+ msg.instance_id = 0;
+ msg.module_id = 0;
+ msg.streaming = 0;
+ msg.wake = 0;
+
+ if (skl->d0i3.state == SKL_DSP_D0I3_STREAMING)
+ msg.streaming = 1;
+
+ /* Clear Vendor specific register D0I3C.I3 to disable D0i3*/
+ if (skl->update_d0i3c)
+ skl->update_d0i3c(skl->dev, false);
+
+ ret = skl_ipc_set_d0ix(&skl->ipc, &msg);
+ if (ret < 0) {
+ dev_err(ctx->dev, "Failed to set DSP to D0i0\n");
+ return ret;
+ }
+
+ skl->cores.state[SKL_DSP_CORE0_ID] = SKL_DSP_RUNNING;
+ skl->d0i3.state = SKL_DSP_D0I3_NONE;
+
+ return 0;
+}
+
static int bxt_set_dsp_D0(struct sst_dsp *ctx, unsigned int core_id)
{
struct skl_sst *skl = ctx->thread_context;
@@ -414,6 +552,8 @@ static int bxt_set_dsp_D3(struct sst_dsp *ctx, unsigned int core_id)
static struct skl_dsp_fw_ops bxt_fw_ops = {
.set_state_D0 = bxt_set_dsp_D0,
.set_state_D3 = bxt_set_dsp_D3,
+ .set_state_D0i3 = bxt_schedule_dsp_D0i3,
+ .set_state_D0i0 = bxt_set_dsp_D0i0,
.load_fw = bxt_load_base_firmware,
.get_fw_errcode = bxt_get_errorcode,
.load_library = bxt_load_library,
diff --git a/sound/soc/intel/skylake/skl-sst-dsp.h b/sound/soc/intel/skylake/skl-sst-dsp.h
index b9e71d051fb1..7c272ba0f4b5 100644
--- a/sound/soc/intel/skylake/skl-sst-dsp.h
+++ b/sound/soc/intel/skylake/skl-sst-dsp.h
@@ -126,11 +126,21 @@ struct sst_dsp_device;
#define SKL_ADSPCS_CPA_SHIFT 24
#define SKL_ADSPCS_CPA_MASK(cm) ((cm) << SKL_ADSPCS_CPA_SHIFT)
+/* DSP Core state */
enum skl_dsp_states {
SKL_DSP_RUNNING = 1,
+ /* Running in D0i3 state; can be in streaming or non-streaming D0i3 */
+ SKL_DSP_RUNNING_D0I3, /* Running in D0i3 state*/
SKL_DSP_RESET,
};
+/* D0i3 substates */
+enum skl_dsp_d0i3_states {
+ SKL_DSP_D0I3_NONE = -1, /* No D0i3 */
+ SKL_DSP_D0I3_NON_STREAMING = 0,
+ SKL_DSP_D0I3_STREAMING = 1,
+};
+
struct skl_dsp_fw_ops {
int (*load_fw)(struct sst_dsp *ctx);
/* FW module parser/loader */
@@ -139,6 +149,8 @@ struct skl_dsp_fw_ops {
int (*parse_fw)(struct sst_dsp *ctx);
int (*set_state_D0)(struct sst_dsp *ctx, unsigned int core_id);
int (*set_state_D3)(struct sst_dsp *ctx, unsigned int core_id);
+ int (*set_state_D0i3)(struct sst_dsp *ctx);
+ int (*set_state_D0i0)(struct sst_dsp *ctx);
unsigned int (*get_fw_errcode)(struct sst_dsp *ctx);
int (*load_mod)(struct sst_dsp *ctx, u16 mod_id, u8 *mod_name);
int (*unload_mod)(struct sst_dsp *ctx, u16 mod_id);
diff --git a/sound/soc/intel/skylake/skl-sst-ipc.h b/sound/soc/intel/skylake/skl-sst-ipc.h
index ef2182d21934..a45c42046b64 100644
--- a/sound/soc/intel/skylake/skl-sst-ipc.h
+++ b/sound/soc/intel/skylake/skl-sst-ipc.h
@@ -53,6 +53,23 @@ struct skl_dsp_cores {
int usage_count[SKL_DSP_CORES_MAX];
};
+/**
+ * skl_d0i3_data: skl D0i3 counters data struct
+ *
+ * @streaming: Count of usecases that can attempt streaming D0i3
+ * @non_streaming: Count of usecases that can attempt non-streaming D0i3
+ * @non_d0i3: Count of usecases that cannot attempt D0i3
+ * @state: current state
+ * @work: D0i3 worker thread
+ */
+struct skl_d0i3_data {
+ int streaming;
+ int non_streaming;
+ int non_d0i3;
+ enum skl_dsp_d0i3_states state;
+ struct delayed_work work;
+};
+
struct skl_sst {
struct device *dev;
struct sst_dsp *dsp;
@@ -86,6 +103,8 @@ struct skl_sst {
/* Callback to update D0i3C register */
void (*update_d0i3c)(struct device *dev, bool enable);
+
+ struct skl_d0i3_data d0i3;
};
struct skl_ipc_init_instance_msg {
--
1.9.1
More information about the Alsa-devel
mailing list