[alsa-devel] [PATCH v4 2/6] ASoC: codecs: Add msm8916-wcd digital codec
Mark Brown
broonie at kernel.org
Tue Sep 6 13:24:56 CEST 2016
On Tue, Sep 06, 2016 at 10:57:41AM +0100, Srinivas Kandagatla wrote:
> +static const struct soc_enum rx_mix2_inp1_chain_enum =
> +SOC_ENUM_SINGLE(LPASS_CDC_CONN_RX1_B3_CTL, 0, 3, rx_mix2_text);
Indentation again.
> + case SND_SOC_DAPM_PRE_PMU:
> + if (++msm8916_wcd->dmic_clk_cnt == 1) {
> + snd_soc_update_bits(codec, dmic_clk_reg,
This looks like you're open coding a supply widget.
> + if (dmic == 1)
> + snd_soc_update_bits(codec, LPASS_CDC_TX1_DMIC_CTL,
> + TXN_DMIC_CTL_CLK_SEL_MASK,
> + TXN_DMIC_CTL_CLK_SEL_DIV3);
> + if (dmic == 2)
> + snd_soc_update_bits(codec, LPASS_CDC_TX2_DMIC_CTL,
> + TXN_DMIC_CTL_CLK_SEL_MASK,
> + TXN_DMIC_CTL_CLK_SEL_DIV3);
This looks like you want a switch statement.
> +static int msm8916_wcd_digital_enable_clock_block(struct snd_soc_codec
> + *codec, int enable)
> +{
> +static int msm8916_wcd_digital_codec_remove(struct snd_soc_codec *codec)
> +{
> + return 0;
> +}
Remove empty functions.
> +static int msm8916_wcd_digital_startup(struct snd_pcm_substream *substream,
> + struct snd_soc_dai *dai)
> +{
> + msm8916_wcd_digital_enable_clock_block(dai->codec, 1);
> + return 0;
> +}
> +
> +static void msm8916_wcd_digital_shutdown(struct snd_pcm_substream *substream,
> + struct snd_soc_dai *dai)
> +{
> + msm8916_wcd_digital_enable_clock_block(dai->codec, 0);
> +}
Two problems here: one is that the power management should be in DAPM,
the other is that the _enable_clock_block() function is totally
pointless - it has only these two call locations and there is absolutely
no shared code between the enable and disable paths so they should just
be inlined.
> +static int msm8916_wcd_digital_remove(struct platform_device *pdev)
> +{
> + struct msm8916_wcd_digital_priv *priv = dev_get_drvdata(&pdev->dev);
> +
> + clk_disable_unprepare(priv->mclk);
> + clk_disable_unprepare(priv->ahbclk);
> + snd_soc_unregister_codec(&pdev->dev);
This is disabling the clocks while the CODEC is still registered and
might be in use, you should unregister first.
> +static const struct of_device_id msm8916_wcd_digital_match_table[] = {
> + {.compatible = "qcom,msm8916-wcd-digital-codec"},
> + {}
Spaces please.
> +static struct platform_driver msm8916_wcd_digital_driver = {
> + .driver = {
> + .name = "msm8916-wcd-digital-codec",
> + .of_match_table = msm8916_wcd_digital_match_table,
> + },
Please line up the }.
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 455 bytes
Desc: not available
URL: <http://mailman.alsa-project.org/pipermail/alsa-devel/attachments/20160906/353dcd77/attachment.sig>
More information about the Alsa-devel
mailing list