[alsa-devel] [PATCH 3/3 v3] ALSA: usb-audio: fix race in snd_usb_endpoint_stop
Takashi Iwai
tiwai at suse.de
Wed Nov 30 10:00:55 CET 2016
On Wed, 30 Nov 2016 08:59:23 +0100,
Jiada Wang wrote:
>
> From: Mark Craske <Mark_Craske at mentor.com>
>
> Kernel crash seen once:
>
> Unable to handle kernel NULL pointer dereference at virtual address 00000008
> pgd = a1d7c000
> [00000008] *pgd=31c93831, *pte=00000000, *ppte=00000000
> Internal error: Oops: 17 [#1] PREEMPT SMP ARM
> CPU: 0 PID: 250 Comm: dbus-daemon Not tainted 3.14.51-03479-gf50bdf4 #1
> task: a3ae61c0 ti: a08c8000 task.ti: a08c8000
> PC is at retire_capture_urb+0x10/0x1f4 [snd_usb_audio]
> LR is at snd_complete_urb+0x140/0x1f0 [snd_usb_audio]
> pc : [<7f0eb22c>] lr : [<7f0e57fc>] psr: 200e0193
> sp : a08c9c98 ip : a08c9ce8 fp : a08c9ce4
> r10: 0000000a r9 : 00000102 r8 : 94cb3000
> r7 : 94cb3000 r6 : 94d0f000 r5 : 94d0e8e8 r4 : 94d0e000
> r3 : 7f0eb21c r2 : 00000000 r1 : 94cb3000 r0 : 00000000
> Flags: nzCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment user
> Control: 10c5387d Table: 31d7c04a DAC: 00000015
> Process dbus-daemon (pid: 250, stack limit = 0xa08c8238)
> Stack: (0xa08c9c98 to 0xa08ca000)
> ...
> Backtrace:
> [<7f0eb21c>] (retire_capture_urb [snd_usb_audio]) from [<7f0e57fc>] (snd_complete_urb+0x140/0x1f0 [snd_usb_audio])
> [<7f0e56bc>] (snd_complete_urb [snd_usb_audio]) from [<80371118>] (__usb_hcd_giveback_urb+0x78/0xf4)
> [<803710a0>] (__usb_hcd_giveback_urb) from [<80371514>] (usb_giveback_urb_bh+0x8c/0xc0)
> [<80371488>] (usb_giveback_urb_bh) from [<80028e3c>] (tasklet_hi_action+0xc4/0x148)
> [<80028d78>] (tasklet_hi_action) from [<80028358>] (__do_softirq+0x190/0x380)
> [<800281c8>] (__do_softirq) from [<80028858>] (irq_exit+0x8c/0xfc)
> [<800287cc>] (irq_exit) from [<8000ea88>] (handle_IRQ+0x8c/0xc8)
> [<8000e9fc>] (handle_IRQ) from [<800085e8>] (gic_handle_irq+0xbc/0xf8)
> [<8000852c>] (gic_handle_irq) from [<80509044>] (__irq_svc+0x44/0x78)
> [<80508820>] (_raw_spin_unlock_irq) from [<8004b880>] (finish_task_switch+0x5c/0x100)
> [<8004b824>] (finish_task_switch) from [<805052f0>] (__schedule+0x48c/0x6d8)
> [<80504e64>] (__schedule) from [<805055d4>] (schedule+0x98/0x9c)
> [<8050553c>] (schedule) from [<800116c8>] (do_work_pending+0x30/0xd0)
> [<80011698>] (do_work_pending) from [<8000e160>] (work_pending+0xc/0x20)
> Code: e1a0c00d e92ddff0 e24cb004 e24dd024 (e5902008)
> Kernel panic - not syncing: Fatal exception in interrupt
>
> There is a race between retire_capture_urb() & stop_endpoints() which is
> setting ep->data_subs to NULL. The underlying cause is in
> snd_usb_endpoint_stop(), which sets
> ep->data_subs = NULL;
> ep->sync_slave = NULL;
> ep->retire_data_urb = NULL;
> ep->prepare_data_urb = NULL;
>
> An improvement, suggested by Andreas Pape (ADIT) is to read parameters
> into local variables. This should solve race between stop and retire
> where it is legal to store the pointers to local variable as they are
> not freed in stop path but just set to NULL.
Well, it's tricky. A saner way would be to clear the stuff really
after all users are gone.
An untested patch is below. Let me know if it really works.
> However, additional races may still happen in close+hw_free against
> retire, as there pointers may be freed in addition. For example, while
> in retire_capture_urb() runtime->dma_area might be freed/nulled.
This shouldn't be a problem, as stop_endpoints() waits until all
active URBS get killed.
thanks,
Takashi
---
diff --git a/sound/usb/endpoint.c b/sound/usb/endpoint.c
index c470251cea4b..f3fce9abece9 100644
--- a/sound/usb/endpoint.c
+++ b/sound/usb/endpoint.c
@@ -384,6 +384,9 @@ static void snd_complete_urb(struct urb *urb)
if (unlikely(atomic_read(&ep->chip->shutdown)))
goto exit_clear;
+ if (unlikely(!test_bit(EP_FLAG_RUNNING, &ep->flags)))
+ goto exit_clear;
+
if (usb_pipeout(ep->pipe)) {
retire_outbound_urb(ep, ctx);
/* can be stopped during retire callback */
@@ -534,6 +537,11 @@ static int wait_clear_urbs(struct snd_usb_endpoint *ep)
alive, ep->ep_num);
clear_bit(EP_FLAG_STOPPING, &ep->flags);
+ ep->data_subs = NULL;
+ ep->sync_slave = NULL;
+ ep->retire_data_urb = NULL;
+ ep->prepare_data_urb = NULL;
+
return 0;
}
@@ -1006,10 +1014,6 @@ void snd_usb_endpoint_stop(struct snd_usb_endpoint *ep)
if (--ep->use_count == 0) {
deactivate_urbs(ep, false);
- ep->data_subs = NULL;
- ep->sync_slave = NULL;
- ep->retire_data_urb = NULL;
- ep->prepare_data_urb = NULL;
set_bit(EP_FLAG_STOPPING, &ep->flags);
}
}
More information about the Alsa-devel
mailing list