[alsa-devel] [PATCH 1/2] ASoC: codecs: msm8916-wcd-analog: clean parse_dt()
Srinivas Kandagatla
srinivas.kandagatla at linaro.org
Fri Nov 4 15:45:39 CET 2016
Move the code which is not parsing dt from pm8916_wcd_analog_parse_dt()
to make it clear to reader.
No functional changes done.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla at linaro.org>
---
This change was suggested by Mark http://www.spinics.net/lists/alsa-devel/msg55878.html
thanks,
srini
sound/soc/codecs/msm8916-wcd-analog.c | 34 +++++++++++++++++-----------------
1 file changed, 17 insertions(+), 17 deletions(-)
diff --git a/sound/soc/codecs/msm8916-wcd-analog.c b/sound/soc/codecs/msm8916-wcd-analog.c
index d9f999b..50ad75a 100644
--- a/sound/soc/codecs/msm8916-wcd-analog.c
+++ b/sound/soc/codecs/msm8916-wcd-analog.c
@@ -802,7 +802,6 @@ static struct snd_soc_codec_driver pm8916_wcd_analog = {
static int pm8916_wcd_analog_parse_dt(struct device *dev,
struct pm8916_wcd_analog_priv *priv)
{
- int ret, i;
if (of_property_read_bool(dev->of_node, "qcom,micbias1-ext-cap"))
priv->micbias1_cap_mode = MICB_1_EN_EXT_BYP_CAP;
@@ -814,21 +813,6 @@ static int pm8916_wcd_analog_parse_dt(struct device *dev,
else
priv->micbias2_cap_mode = MICB_1_EN_NO_EXT_BYP_CAP;
- priv->mclk = devm_clk_get(dev, "mclk");
- if (IS_ERR(priv->mclk)) {
- dev_err(dev, "failed to get mclk\n");
- return PTR_ERR(priv->mclk);
- }
- for (i = 0; i < ARRAY_SIZE(supply_names); i++)
- priv->supplies[i].supply = supply_names[i];
-
- ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(priv->supplies),
- priv->supplies);
- if (ret) {
- dev_err(dev, "Failed to get regulator supplies %d\n", ret);
- return ret;
- }
-
return 0;
}
@@ -836,7 +820,7 @@ static int pm8916_wcd_analog_spmi_probe(struct platform_device *pdev)
{
struct pm8916_wcd_analog_priv *priv;
struct device *dev = &pdev->dev;
- int ret;
+ int ret, i;
priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
if (!priv)
@@ -846,6 +830,22 @@ static int pm8916_wcd_analog_spmi_probe(struct platform_device *pdev)
if (ret < 0)
return ret;
+ priv->mclk = devm_clk_get(dev, "mclk");
+ if (IS_ERR(priv->mclk)) {
+ dev_err(dev, "failed to get mclk\n");
+ return PTR_ERR(priv->mclk);
+ }
+
+ for (i = 0; i < ARRAY_SIZE(supply_names); i++)
+ priv->supplies[i].supply = supply_names[i];
+
+ ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(priv->supplies),
+ priv->supplies);
+ if (ret) {
+ dev_err(dev, "Failed to get regulator supplies %d\n", ret);
+ return ret;
+ }
+
ret = clk_prepare_enable(priv->mclk);
if (ret < 0) {
dev_err(dev, "failed to enable mclk %d\n", ret);
--
2.10.1
More information about the Alsa-devel
mailing list