[alsa-devel] [PATCH] sound/usb: fix to release stream resources from media_snd_device_delete()
Mauro Carvalho Chehab
mchehab at osg.samsung.com
Sat Mar 19 13:10:26 CET 2016
Em Fri, 18 Mar 2016 20:50:31 -0600
Shuah Khan <shuahkh at osg.samsung.com> escreveu:
> Fix to release stream resources from media_snd_device_delete() before
> media device is unregistered. Without this change, stream resource free
> is attempted after the media device is unregistered which would result
> in use-after-free errors.
>
> Signed-off-by: Shuah Khan <shuahkh at osg.samsung.com>
> ---
>
> - Ran bind/unbind loop (1000 iteration) test on snd-usb-audio
> while running mc_nextgen_test loop (1000 iterations) in parallel.
> - Ran bind/unbind and rmmod/modprobe tests on both drivers. Also
> generated graphs when after bind/unbind, rmmod/modprobe. Graphs
> look good.
> - Note: Please apply the following patch to fix memory leak:
> sound/usb: Fix memory leak in media_snd_stream_delete() during unbind
> https://lkml.org/lkml/2016/3/16/1050
Yeah, a way better!
For normal bind/unbind, it seems to be working fine. Also
for driver's rmmod, so:
Tested-by: Mauro Carvalho Chehab <mchehab at osg.samsung.com>
PS.:
===
There are still some troubles if we run an infinite loop
binding/unbinding au0828 and another one binding/unbinding
snd-usb-audio, like this one:
[ 91.556188] ------------[ cut here ]------------
[ 91.556500] WARNING: CPU: 1 PID: 2920 at drivers/media/media-entity.c:392 __media_entity_pipeline_start+0x271/0xce0 [media]()
[ 91.556626] Modules linked in: ir_lirc_codec lirc_dev au8522_dig xc5000 tuner au8522_decoder au8522_common au0828 videobuf2_vmalloc videobuf2_memops videobuf2_v4l2 videobuf2_core tveeprom dvb_core rc_core v4l2_common videodev snd_usb_audio snd_usbmidi_lib snd_rawmidi snd_seq_device media cpufreq_powersave cpufreq_conservative cpufreq_userspace cpufreq_stats parport_pc ppdev lp parport snd_hda_codec_hdmi intel_rapl x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel iTCO_wdt kvm iTCO_vendor_support irqbypass crct10dif_pclmul crc32_pclmul crc32c_intel ghash_clmulni_intel sha256_ssse3 sha256_generic hmac drbg snd_hda_codec_realtek i915 snd_hda_codec_generic aesni_intel aes_x86_64 btusb lrw btrtl gf128mul snd_hda_intel glue_helper ablk_helper btbcm btintel cryptd psmouse snd_hda_codec bluetooth
[ 91.556693] snd_hwdep i2c_algo_bit sg snd_hda_core serio_raw pcspkr evdev drm_kms_helper snd_pcm rfkill drm snd_timer mei_me snd i2c_i801 soundcore lpc_ich mei mfd_core battery video dw_dmac i2c_designware_platform dw_dmac_core i2c_designware_core acpi_pad button tpm_tis tpm ext4 crc16 mbcache jbd2 dm_mod sd_mod hid_generic usbhid ahci libahci libata e1000e xhci_pci ptp scsi_mod ehci_pci ehci_hcd pps_core xhci_hcd fan thermal sdhci_acpi sdhci mmc_core i2c_hid hid
[ 91.556748] CPU: 1 PID: 2920 Comm: v4l_id Tainted: G D W 4.5.0+ #62
[ 91.556751] Hardware name: /NUC5i7RYB, BIOS RYBDWi35.86A.0350.2015.0812.1722 08/12/2015
[ 91.556754] ffffffffa0e247a0 ffff8803a3d17b08 ffffffff819447c1 0000000000000000
[ 91.556759] ffff88009bbe17c0 ffff8803a3d17b48 ffffffff8114fd16 ffffffffa0e20651
[ 91.556763] ffff8803a47c9c58 ffff8803a477d2c8 ffff8803a5ac96f8 dffffc0000000000
[ 91.556768] Call Trace:
[ 91.556774] [<ffffffff819447c1>] dump_stack+0x85/0xc4
[ 91.556778] [<ffffffff8114fd16>] warn_slowpath_common+0xc6/0x120
[ 91.556783] [<ffffffffa0e20651>] ? __media_entity_pipeline_start+0x271/0xce0 [media]
[ 91.556786] [<ffffffff8114feea>] warn_slowpath_null+0x1a/0x20
[ 91.556790] [<ffffffffa0e20651>] __media_entity_pipeline_start+0x271/0xce0 [media]
[ 91.556794] [<ffffffff822d9aca>] ? __schedule+0x78a/0x2570
[ 91.556797] [<ffffffff8156e428>] ? memset+0x28/0x30
[ 91.556802] [<ffffffffa0e203e0>] ? media_entity_pipeline_stop+0x60/0x60 [media]
[ 91.556806] [<ffffffff8124a73d>] ? trace_hardirqs_on+0xd/0x10
[ 91.556810] [<ffffffffa1430a05>] ? au0828_enable_source+0x55/0x9f0 [au0828]
[ 91.556813] [<ffffffff822ddb20>] ? mutex_trylock+0x400/0x400
[ 91.556818] [<ffffffffa1440833>] ? au0828_v4l2_close+0xb3/0x590 [au0828]
[ 91.556822] [<ffffffffa1430da4>] au0828_enable_source+0x3f4/0x9f0 [au0828]
[ 91.556824] [<ffffffff822ddb20>] ? mutex_trylock+0x400/0x400
[ 91.556834] [<ffffffffa133acf6>] v4l_enable_media_source+0x66/0x90 [videodev]
[ 91.556839] [<ffffffffa14409da>] au0828_v4l2_close+0x25a/0x590 [au0828]
[ 91.556846] [<ffffffffa1301270>] v4l2_release+0xf0/0x210 [videodev]
[ 91.556849] [<ffffffff815c2c4f>] __fput+0x20f/0x6d0
[ 91.556853] [<ffffffff815c317e>] ____fput+0xe/0x10
[ 91.556856] [<ffffffff811acde7>] task_work_run+0x137/0x200
[ 91.556859] [<ffffffff81005d54>] exit_to_usermode_loop+0x154/0x180
[ 91.556863] [<ffffffff8124a1b6>] ? trace_hardirqs_on_caller+0x16/0x590
[ 91.556866] [<ffffffff810073a6>] syscall_return_slowpath+0x186/0x1c0
[ 91.556869] [<ffffffff822e7a1c>] entry_SYSCALL_64_fastpath+0xbf/0xc1
[ 91.556872] ---[ end trace 3e95e11ff0b9efad ]---
I suspect that something is not properly protected by the graph mutex at
either ALSA or au0828 driver.
I also got a GPF:
[ 95.398931] au0828: Start Pipeline: Xceive XC5000->au0828a vbi Error -16
[ 95.398936] au0828: Deactivate link Error 0
[ 95.398943] tuner 6-0061: Putting tuner to sleep
[ 95.398960] kasan: CONFIG_KASAN_INLINE enabled
[ 95.398962] kasan: GPF could be caused by NULL-ptr deref or user memory access
[ 95.398967] general protection fault: 0000 [#2] SMP KASAN
[ 95.399020] Modules linked in: ir_lirc_codec lirc_dev au8522_dig xc5000 tuner au8522_decoder au8522_common au0828 videobuf2_vmalloc videobuf2_memops videobuf2_v4l2 videobuf2_core tveeprom dvb_core rc_core v4l2_common videodev snd_usb_audio snd_usbmidi_lib snd_rawmidi snd_seq_device media cpufreq_powersave cpufreq_conservative cpufreq_userspace cpufreq_stats parport_pc ppdev lp parport snd_hda_codec_hdmi intel_rapl x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel iTCO_wdt kvm iTCO_vendor_support irqbypass crct10dif_pclmul crc32_pclmul crc32c_intel ghash_clmulni_intel sha256_ssse3 sha256_generic hmac drbg snd_hda_codec_realtek i915 snd_hda_codec_generic aesni_intel aes_x86_64 btusb lrw btrtl gf128mul snd_hda_intel glue_helper ablk_helper btbcm btintel cryptd psmouse snd_hda_codec bluetooth
[ 95.399853] snd_hwdep i2c_algo_bit sg snd_hda_core serio_raw pcspkr evdev drm_kms_helper snd_pcm rfkill drm snd_timer mei_me snd i2c_i801 soundcore lpc_ich mei mfd_core battery video dw_dmac i2c_designware_platform dw_dmac_core i2c_designware_core acpi_pad button tpm_tis tpm ext4 crc16 mbcache jbd2 dm_mod sd_mod hid_generic usbhid ahci libahci libata e1000e xhci_pci ptp scsi_mod ehci_pci ehci_hcd pps_core xhci_hcd fan thermal sdhci_acpi sdhci mmc_core i2c_hid hid
[ 95.400389] CPU: 2 PID: 2966 Comm: v4l_id Tainted: G D W 4.5.0+ #62
[ 95.400455] Hardware name: /NUC5i7RYB, BIOS RYBDWi35.86A.0350.2015.0812.1722 08/12/2015
[ 95.400541] task: ffff88009bbe4740 ti: ffff8803a45a0000 task.ti: ffff8803a45a0000
[ 95.400610] RIP: 0010:[<ffffffff81db0aa4>] [<ffffffff81db0aa4>] usb_set_interface+0x34/0x9c0
[ 95.400694] RSP: 0018:ffff8803a45a7d18 EFLAGS: 00010202
[ 95.400744] RAX: dffffc0000000000 RBX: ffff8803a3cbab2c RCX: 1ffff10006ba18e2
[ 95.400809] RDX: 0000000000000008 RSI: 0000000000000000 RDI: 0000000000000040
[ 95.400873] RBP: ffff8803a45a7d88 R08: 0000000000000001 R09: 0000000000000001
[ 95.400938] R10: ffff8803a4414a38 R11: 0000000000000000 R12: ffff8803bc482400
[ 95.401004] R13: dffffc0000000000 R14: ffff8803a3cb8000 R15: 0000000000000000
[ 95.401069] FS: 00007f19fbd19700(0000) GS:ffff8803c6900000(0000) knlGS:0000000000000000
[ 95.401141] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 95.401190] CR2: 0000558300d51d44 CR3: 000000009af29000 CR4: 00000000003406e0
[ 95.401255] Stack:
[ 95.401277] ffff8803a5b5ea20 ffff8803a45a7d40 ffffffffa1490f0f 0000000000000061
[ 95.401358] ffff8803a5b5e510 ffff8803a45a7d58 ffffffffa147003c ffff880300000000
[ 95.401438] ffff880300000000 ffff8803a3cbab2c ffff8803bc482400 dffffc0000000000
[ 95.401518] Call Trace:
[ 95.401547] [<ffffffffa1490f0f>] ? xc5000_sleep+0x8f/0xd0 [xc5000]
[ 95.405722] [<ffffffffa147003c>] ? fe_standby+0x3c/0x50 [tuner]
[ 95.409842] [<ffffffffa1440b20>] au0828_v4l2_close+0x3a0/0x590 [au0828]
[ 95.412140] [<ffffffffa1301270>] v4l2_release+0xf0/0x210 [videodev]
[ 95.414119] [<ffffffff815c2c4f>] __fput+0x20f/0x6d0
[ 95.416046] [<ffffffff815c317e>] ____fput+0xe/0x10
[ 95.417879] [<ffffffff811acde7>] task_work_run+0x137/0x200
[ 95.419656] [<ffffffff81005d54>] exit_to_usermode_loop+0x154/0x180
[ 95.421420] [<ffffffff8124a1b6>] ? trace_hardirqs_on_caller+0x16/0x590
[ 95.423177] [<ffffffff810073a6>] syscall_return_slowpath+0x186/0x1c0
[ 95.424911] [<ffffffff822e7a1c>] entry_SYSCALL_64_fastpath+0xbf/0xc1
[ 95.426629] Code: 00 00 00 00 fc ff df 48 89 e5 41 57 41 56 41 55 41 54 49 89 ff 53 48 83 c7 40 48 83 ec 48 89 55 c8 48 89 fa 48 c1 ea 03 89 75 d0 <80> 3c 02 00 0f 85 67 07 00 00 49 8d 7f 18 48 b8 00 00 00 00 00
[ 95.428560] RIP [<ffffffff81db0aa4>] usb_set_interface+0x34/0x9c0
[ 95.430358] RSP <ffff8803a45a7d18>
[ 95.432566] ---[ end trace 3e95e11ff0b9efaf ]---
As nobody expects someone to do infinite loops binding/unbinding
both drivers, I guess it is ok to keep it for Kernel 4.6, but
we need to find a way fix those locking issues for dynamic graph
changes.
Regards,
Mauro
More information about the Alsa-devel
mailing list