[alsa-devel] [very-RFC 0/8] TSN driver for the kernel

Takashi Sakamoto o-takashi at sakamocchi.jp
Sun Jun 12 11:14:49 CEST 2016


On Jun 12 2016 17:28, Henrik Austad wrote:
> On Sun, Jun 12, 2016 at 12:38:36PM +0900, Takashi Sakamoto wrote:
>> I'm one of maintainers for ALSA firewire stack, which handles IEC
>> 61883-1/6 and vendor-unique packets on IEEE 1394 bus for consumer
>> recording equipments.
>> (I'm not in MAINTAINERS because I'm a shy boy.)
>>
>> IEC 61883-6 describes that one packet can multiplex several types of
>> data in its data channels; i.e. Multi Bit Linear Audio data (PCM
>> samples), One Bit Audio Data (DSD), MIDI messages and so on.
> 
> Hmm, that I did not know, not sure how that applies to AVB, but definately 
> something I have to look into.

For your information, I describe more about it.

You can see pre-standardized specification for IEC 61883-6 in website of
1394 Trade Association. Let's look for 'Audio and Music Data
Transmission Protocol 2.3 (October 13, 2010, 1394TA)'
http://1394ta.org/specifications/

In 'clause 12. AM824 SEQUENCE ADAPTATION LAYERS', you can see that one
data block includes several types of data.


But I can imagine that joint group for AVB loosely refers to IEC
61883-6. In this case, AVB specification might describe one data block
transfers one type of data, to drop unreasonable complexities.

>> If you handles packet payload in 'struct snd_pcm_ops.copy', a process
>> context of an ALSA PCM applications performs the work. Thus, no chances
>> to multiplex data with the other types.
> 
> The driver is not adhering fully to any standards right now, the amount of 
> detail is quite high - but I'm slowly improving as I go through the 
> standards. Getting on top of all the standards and all the different 
> subsystems are definately a work in progress (it's a lot to digest!)

In my taste, the driver is not necessarily compliant to any standards.
It's enough just to work its task, without bad side-effects to Linux
system. Based on this concept, current ALSA firewire stack just support
PCM frames and MIDI messages.

Here, I tell you that actual devices tend not to be compliant to any
standards and lost inter-operability.

(Especially, most of audio and music units on IEEE 1394 bus ignores some
of items in standards. In short, they already lost inter-operability.)

So here, we just consider about what actual devices do, instead of
following any standards.


Regards

Takashi Sakamoto

-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: OpenPGP digital signature
URL: <http://mailman.alsa-project.org/pipermail/alsa-devel/attachments/20160612/118d5a0c/attachment-0002.sig>


More information about the Alsa-devel mailing list