[alsa-devel] Applied "ASoC: rt5514: add rt5514 SPI driver" to the asoc tree
Mark Brown
broonie at kernel.org
Wed Jun 8 12:22:12 CEST 2016
The patch
ASoC: rt5514: add rt5514 SPI driver
has been applied to the asoc tree at
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git
All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying
to this mail.
Thanks,
Mark
>From 6eebf35b0e4a02248f7dba5d1719c6896afe41ba Mon Sep 17 00:00:00 2001
From: Oder Chiou <oder_chiou at realtek.com>
Date: Mon, 6 Jun 2016 18:33:31 +0800
Subject: [PATCH] ASoC: rt5514: add rt5514 SPI driver
The device has multiple control interfaces, I2C and SPI. The I2C interface
mainly controls the register settings of codec. The SPI interface is in
order to provide the high speed transmission of data. For example, high
bandwidth memory read/write of DSP. The patch adds the rt5514 SPI driver
for loading the firmware of DSP and retrieving the voice data from DSP
after the system is waked up by specific voice.
Signed-off-by: Oder Chiou <oder_chiou at realtek.com>
Signed-off-by: Mark Brown <broonie at kernel.org>
---
sound/soc/codecs/Kconfig | 3 +
sound/soc/codecs/Makefile | 2 +
sound/soc/codecs/rt5514-spi.c | 459 ++++++++++++++++++++++++++++++++++++++++++
sound/soc/codecs/rt5514-spi.h | 38 ++++
sound/soc/codecs/rt5514.c | 136 ++++++++++++-
sound/soc/codecs/rt5514.h | 4 +
6 files changed, 640 insertions(+), 2 deletions(-)
create mode 100644 sound/soc/codecs/rt5514-spi.c
create mode 100644 sound/soc/codecs/rt5514-spi.h
diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig
index 4d82a58ff6b0..7d5afd1ea09b 100644
--- a/sound/soc/codecs/Kconfig
+++ b/sound/soc/codecs/Kconfig
@@ -643,6 +643,9 @@ config SND_SOC_RT298
config SND_SOC_RT5514
tristate
+config SND_SOC_RT5514_SPI
+ tristate
+
config SND_SOC_RT5616
tristate "Realtek RT5616 CODEC"
depends on I2C
diff --git a/sound/soc/codecs/Makefile b/sound/soc/codecs/Makefile
index 0f548fd34ca3..734b68de246c 100644
--- a/sound/soc/codecs/Makefile
+++ b/sound/soc/codecs/Makefile
@@ -100,6 +100,7 @@ snd-soc-rl6347a-objs := rl6347a.o
snd-soc-rt286-objs := rt286.o
snd-soc-rt298-objs := rt298.o
snd-soc-rt5514-objs := rt5514.o
+snd-soc-rt5514-spi-objs := rt5514-spi.o
snd-soc-rt5616-objs := rt5616.o
snd-soc-rt5631-objs := rt5631.o
snd-soc-rt5640-objs := rt5640.o
@@ -314,6 +315,7 @@ obj-$(CONFIG_SND_SOC_RL6347A) += snd-soc-rl6347a.o
obj-$(CONFIG_SND_SOC_RT286) += snd-soc-rt286.o
obj-$(CONFIG_SND_SOC_RT298) += snd-soc-rt298.o
obj-$(CONFIG_SND_SOC_RT5514) += snd-soc-rt5514.o
+obj-$(CONFIG_SND_SOC_RT5514_SPI) += snd-soc-rt5514-spi.o
obj-$(CONFIG_SND_SOC_RT5616) += snd-soc-rt5616.o
obj-$(CONFIG_SND_SOC_RT5631) += snd-soc-rt5631.o
obj-$(CONFIG_SND_SOC_RT5640) += snd-soc-rt5640.o
diff --git a/sound/soc/codecs/rt5514-spi.c b/sound/soc/codecs/rt5514-spi.c
new file mode 100644
index 000000000000..8a9382e9787a
--- /dev/null
+++ b/sound/soc/codecs/rt5514-spi.c
@@ -0,0 +1,459 @@
+/*
+ * rt5514-spi.c -- RT5514 SPI driver
+ *
+ * Copyright 2015 Realtek Semiconductor Corp.
+ * Author: Oder Chiou <oder_chiou at realtek.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/input.h>
+#include <linux/spi/spi.h>
+#include <linux/device.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/slab.h>
+#include <linux/gpio.h>
+#include <linux/sched.h>
+#include <linux/kthread.h>
+#include <linux/uaccess.h>
+#include <linux/miscdevice.h>
+#include <linux/regulator/consumer.h>
+#include <linux/pm_qos.h>
+#include <linux/sysfs.h>
+#include <linux/clk.h>
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/soc.h>
+#include <sound/soc-dapm.h>
+#include <sound/initval.h>
+#include <sound/tlv.h>
+
+#include "rt5514-spi.h"
+
+static struct spi_device *rt5514_spi;
+
+struct rt5514_dsp {
+ struct device *dev;
+ struct delayed_work copy_work;
+ struct mutex dma_lock;
+ struct snd_pcm_substream *substream;
+ unsigned int buf_base, buf_limit, buf_rp;
+ size_t buf_size;
+ size_t dma_offset;
+ size_t dsp_offset;
+};
+
+static const struct snd_pcm_hardware rt5514_spi_pcm_hardware = {
+ .info = SNDRV_PCM_INFO_MMAP |
+ SNDRV_PCM_INFO_MMAP_VALID |
+ SNDRV_PCM_INFO_INTERLEAVED,
+ .formats = SNDRV_PCM_FMTBIT_S16_LE,
+ .period_bytes_min = PAGE_SIZE,
+ .period_bytes_max = 0x20000 / 8,
+ .periods_min = 8,
+ .periods_max = 8,
+ .channels_min = 1,
+ .channels_max = 1,
+ .buffer_bytes_max = 0x20000,
+};
+
+static struct snd_soc_dai_driver rt5514_spi_dai = {
+ .name = "rt5514-dsp-cpu-dai",
+ .id = 0,
+ .capture = {
+ .stream_name = "DSP Capture",
+ .channels_min = 1,
+ .channels_max = 1,
+ .rates = SNDRV_PCM_RATE_16000,
+ .formats = SNDRV_PCM_FMTBIT_S16_LE,
+ },
+};
+
+static void rt5514_spi_copy_work(struct work_struct *work)
+{
+ struct rt5514_dsp *rt5514_dsp =
+ container_of(work, struct rt5514_dsp, copy_work.work);
+ struct snd_pcm_runtime *runtime = rt5514_dsp->substream->runtime;
+ size_t period_bytes, truncated_bytes = 0;
+
+ mutex_lock(&rt5514_dsp->dma_lock);
+ if (!rt5514_dsp->substream) {
+ dev_err(rt5514_dsp->dev, "No pcm substream\n");
+ goto done;
+ }
+
+ period_bytes = snd_pcm_lib_period_bytes(rt5514_dsp->substream);
+
+ if (rt5514_dsp->buf_size - rt5514_dsp->dsp_offset < period_bytes)
+ period_bytes = rt5514_dsp->buf_size - rt5514_dsp->dsp_offset;
+
+ if (rt5514_dsp->buf_rp + period_bytes <= rt5514_dsp->buf_limit) {
+ rt5514_spi_burst_read(rt5514_dsp->buf_rp,
+ runtime->dma_area + rt5514_dsp->dma_offset,
+ period_bytes);
+
+ if (rt5514_dsp->buf_rp + period_bytes == rt5514_dsp->buf_limit)
+ rt5514_dsp->buf_rp = rt5514_dsp->buf_base;
+ else
+ rt5514_dsp->buf_rp += period_bytes;
+ } else {
+ truncated_bytes = rt5514_dsp->buf_limit - rt5514_dsp->buf_rp;
+ rt5514_spi_burst_read(rt5514_dsp->buf_rp,
+ runtime->dma_area + rt5514_dsp->dma_offset,
+ truncated_bytes);
+
+ rt5514_spi_burst_read(rt5514_dsp->buf_base,
+ runtime->dma_area + rt5514_dsp->dma_offset +
+ truncated_bytes, period_bytes - truncated_bytes);
+
+ rt5514_dsp->buf_rp = rt5514_dsp->buf_base +
+ period_bytes - truncated_bytes;
+ }
+
+ rt5514_dsp->dma_offset += period_bytes;
+ if (rt5514_dsp->dma_offset >= runtime->dma_bytes)
+ rt5514_dsp->dma_offset = 0;
+
+ rt5514_dsp->dsp_offset += period_bytes;
+
+ snd_pcm_period_elapsed(rt5514_dsp->substream);
+
+ if (rt5514_dsp->dsp_offset < rt5514_dsp->buf_size)
+ schedule_delayed_work(&rt5514_dsp->copy_work, 5);
+done:
+ mutex_unlock(&rt5514_dsp->dma_lock);
+}
+
+/* PCM for streaming audio from the DSP buffer */
+static int rt5514_spi_pcm_open(struct snd_pcm_substream *substream)
+{
+ snd_soc_set_runtime_hwparams(substream, &rt5514_spi_pcm_hardware);
+
+ return 0;
+}
+
+static int rt5514_spi_hw_params(struct snd_pcm_substream *substream,
+ struct snd_pcm_hw_params *hw_params)
+{
+ struct snd_soc_pcm_runtime *rtd = substream->private_data;
+ struct rt5514_dsp *rt5514_dsp =
+ snd_soc_platform_get_drvdata(rtd->platform);
+ int ret;
+
+ mutex_lock(&rt5514_dsp->dma_lock);
+ ret = snd_pcm_lib_alloc_vmalloc_buffer(substream,
+ params_buffer_bytes(hw_params));
+ rt5514_dsp->substream = substream;
+ mutex_unlock(&rt5514_dsp->dma_lock);
+
+ return ret;
+}
+
+static int rt5514_spi_hw_free(struct snd_pcm_substream *substream)
+{
+ struct snd_soc_pcm_runtime *rtd = substream->private_data;
+ struct rt5514_dsp *rt5514_dsp =
+ snd_soc_platform_get_drvdata(rtd->platform);
+
+ mutex_lock(&rt5514_dsp->dma_lock);
+ rt5514_dsp->substream = NULL;
+ mutex_unlock(&rt5514_dsp->dma_lock);
+
+ cancel_delayed_work_sync(&rt5514_dsp->copy_work);
+
+ return snd_pcm_lib_free_vmalloc_buffer(substream);
+}
+
+static int rt5514_spi_prepare(struct snd_pcm_substream *substream)
+{
+ struct snd_soc_pcm_runtime *rtd = substream->private_data;
+ struct rt5514_dsp *rt5514_dsp =
+ snd_soc_platform_get_drvdata(rtd->platform);
+ u8 buf[8];
+
+ rt5514_dsp->dma_offset = 0;
+ rt5514_dsp->dsp_offset = 0;
+
+ /**
+ * The address area x1800XXXX is the register address, and it cannot
+ * support spi burst read perfectly. So we use the spi burst read
+ * individually to make sure the data correctly.
+ */
+ rt5514_spi_burst_read(RT5514_BUFFER_VOICE_BASE, (u8 *)&buf,
+ sizeof(buf));
+ rt5514_dsp->buf_base = buf[0] | buf[1] << 8 | buf[2] << 16 |
+ buf[3] << 24;
+
+ rt5514_spi_burst_read(RT5514_BUFFER_VOICE_LIMIT, (u8 *)&buf,
+ sizeof(buf));
+ rt5514_dsp->buf_limit = buf[0] | buf[1] << 8 | buf[2] << 16 |
+ buf[3] << 24;
+
+ rt5514_spi_burst_read(RT5514_BUFFER_VOICE_RP, (u8 *)&buf,
+ sizeof(buf));
+ rt5514_dsp->buf_rp = buf[0] | buf[1] << 8 | buf[2] << 16 |
+ buf[3] << 24;
+
+ rt5514_spi_burst_read(RT5514_BUFFER_VOICE_SIZE, (u8 *)&buf,
+ sizeof(buf));
+ rt5514_dsp->buf_size = buf[0] | buf[1] << 8 | buf[2] << 16 |
+ buf[3] << 24;
+
+ return 0;
+}
+
+static int rt5514_spi_trigger(struct snd_pcm_substream *substream, int cmd)
+{
+ struct snd_soc_pcm_runtime *rtd = substream->private_data;
+ struct rt5514_dsp *rt5514_dsp =
+ snd_soc_platform_get_drvdata(rtd->platform);
+
+ if (cmd == SNDRV_PCM_TRIGGER_START) {
+ if (rt5514_dsp->buf_base && rt5514_dsp->buf_limit &&
+ rt5514_dsp->buf_rp && rt5514_dsp->buf_size)
+ schedule_delayed_work(&rt5514_dsp->copy_work, 0);
+ }
+
+ return 0;
+}
+
+static snd_pcm_uframes_t rt5514_spi_pcm_pointer(
+ struct snd_pcm_substream *substream)
+{
+ struct snd_pcm_runtime *runtime = substream->runtime;
+ struct snd_soc_pcm_runtime *rtd = substream->private_data;
+ struct rt5514_dsp *rt5514_dsp =
+ snd_soc_platform_get_drvdata(rtd->platform);
+
+ return bytes_to_frames(runtime, rt5514_dsp->dma_offset);
+}
+
+static struct snd_pcm_ops rt5514_spi_pcm_ops = {
+ .open = rt5514_spi_pcm_open,
+ .hw_params = rt5514_spi_hw_params,
+ .hw_free = rt5514_spi_hw_free,
+ .trigger = rt5514_spi_trigger,
+ .prepare = rt5514_spi_prepare,
+ .pointer = rt5514_spi_pcm_pointer,
+ .mmap = snd_pcm_lib_mmap_vmalloc,
+ .page = snd_pcm_lib_get_vmalloc_page,
+};
+
+static int rt5514_spi_pcm_probe(struct snd_soc_platform *platform)
+{
+ struct rt5514_dsp *rt5514_dsp;
+
+ rt5514_dsp = devm_kzalloc(platform->dev, sizeof(*rt5514_dsp),
+ GFP_KERNEL);
+
+ rt5514_dsp->dev = &rt5514_spi->dev;
+ mutex_init(&rt5514_dsp->dma_lock);
+ INIT_DELAYED_WORK(&rt5514_dsp->copy_work, rt5514_spi_copy_work);
+ snd_soc_platform_set_drvdata(platform, rt5514_dsp);
+
+ return 0;
+}
+
+static struct snd_soc_platform_driver rt5514_spi_platform = {
+ .probe = rt5514_spi_pcm_probe,
+ .ops = &rt5514_spi_pcm_ops,
+};
+
+static const struct snd_soc_component_driver rt5514_spi_dai_component = {
+ .name = "rt5514-spi-dai",
+};
+
+/**
+ * rt5514_spi_burst_read - Read data from SPI by rt5514 address.
+ * @addr: Start address.
+ * @rxbuf: Data Buffer for reading.
+ * @len: Data length, it must be a multiple of 8.
+ *
+ *
+ * Returns true for success.
+ */
+int rt5514_spi_burst_read(unsigned int addr, u8 *rxbuf, size_t len)
+{
+ u8 spi_cmd = RT5514_SPI_CMD_BURST_READ;
+ int status;
+ u8 write_buf[8];
+ unsigned int i, end, offset = 0;
+
+ struct spi_message message;
+ struct spi_transfer x[3];
+
+ while (offset < len) {
+ if (offset + RT5514_SPI_BUF_LEN <= len)
+ end = RT5514_SPI_BUF_LEN;
+ else
+ end = len % RT5514_SPI_BUF_LEN;
+
+ write_buf[0] = spi_cmd;
+ write_buf[1] = ((addr + offset) & 0xff000000) >> 24;
+ write_buf[2] = ((addr + offset) & 0x00ff0000) >> 16;
+ write_buf[3] = ((addr + offset) & 0x0000ff00) >> 8;
+ write_buf[4] = ((addr + offset) & 0x000000ff) >> 0;
+
+ spi_message_init(&message);
+ memset(x, 0, sizeof(x));
+
+ x[0].len = 5;
+ x[0].tx_buf = write_buf;
+ spi_message_add_tail(&x[0], &message);
+
+ x[1].len = 4;
+ x[1].tx_buf = write_buf;
+ spi_message_add_tail(&x[1], &message);
+
+ x[2].len = end;
+ x[2].rx_buf = rxbuf + offset;
+ spi_message_add_tail(&x[2], &message);
+
+ status = spi_sync(rt5514_spi, &message);
+
+ if (status)
+ return false;
+
+ offset += RT5514_SPI_BUF_LEN;
+ }
+
+ for (i = 0; i < len; i += 8) {
+ write_buf[0] = rxbuf[i + 0];
+ write_buf[1] = rxbuf[i + 1];
+ write_buf[2] = rxbuf[i + 2];
+ write_buf[3] = rxbuf[i + 3];
+ write_buf[4] = rxbuf[i + 4];
+ write_buf[5] = rxbuf[i + 5];
+ write_buf[6] = rxbuf[i + 6];
+ write_buf[7] = rxbuf[i + 7];
+
+ rxbuf[i + 0] = write_buf[7];
+ rxbuf[i + 1] = write_buf[6];
+ rxbuf[i + 2] = write_buf[5];
+ rxbuf[i + 3] = write_buf[4];
+ rxbuf[i + 4] = write_buf[3];
+ rxbuf[i + 5] = write_buf[2];
+ rxbuf[i + 6] = write_buf[1];
+ rxbuf[i + 7] = write_buf[0];
+ }
+
+ return true;
+}
+
+/**
+ * rt5514_spi_burst_write - Write data to SPI by rt5514 address.
+ * @addr: Start address.
+ * @txbuf: Data Buffer for writng.
+ * @len: Data length, it must be a multiple of 8.
+ *
+ *
+ * Returns true for success.
+ */
+int rt5514_spi_burst_write(u32 addr, const u8 *txbuf, size_t len)
+{
+ u8 spi_cmd = RT5514_SPI_CMD_BURST_WRITE;
+ u8 *write_buf;
+ unsigned int i, end, offset = 0;
+
+ write_buf = kmalloc(RT5514_SPI_BUF_LEN + 6, GFP_KERNEL);
+
+ if (write_buf == NULL)
+ return -ENOMEM;
+
+ while (offset < len) {
+ if (offset + RT5514_SPI_BUF_LEN <= len)
+ end = RT5514_SPI_BUF_LEN;
+ else
+ end = len % RT5514_SPI_BUF_LEN;
+
+ write_buf[0] = spi_cmd;
+ write_buf[1] = ((addr + offset) & 0xff000000) >> 24;
+ write_buf[2] = ((addr + offset) & 0x00ff0000) >> 16;
+ write_buf[3] = ((addr + offset) & 0x0000ff00) >> 8;
+ write_buf[4] = ((addr + offset) & 0x000000ff) >> 0;
+
+ for (i = 0; i < end; i += 8) {
+ write_buf[i + 12] = txbuf[offset + i + 0];
+ write_buf[i + 11] = txbuf[offset + i + 1];
+ write_buf[i + 10] = txbuf[offset + i + 2];
+ write_buf[i + 9] = txbuf[offset + i + 3];
+ write_buf[i + 8] = txbuf[offset + i + 4];
+ write_buf[i + 7] = txbuf[offset + i + 5];
+ write_buf[i + 6] = txbuf[offset + i + 6];
+ write_buf[i + 5] = txbuf[offset + i + 7];
+ }
+
+ write_buf[end + 5] = spi_cmd;
+
+ spi_write(rt5514_spi, write_buf, end + 6);
+
+ offset += RT5514_SPI_BUF_LEN;
+ }
+
+ kfree(write_buf);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(rt5514_spi_burst_write);
+
+static int rt5514_spi_probe(struct spi_device *spi)
+{
+ int ret;
+
+ rt5514_spi = spi;
+
+ ret = snd_soc_register_platform(&spi->dev, &rt5514_spi_platform);
+ if (ret < 0) {
+ dev_err(&spi->dev, "Failed to register platform.\n");
+ goto err_plat;
+ }
+
+ ret = snd_soc_register_component(&spi->dev, &rt5514_spi_dai_component,
+ &rt5514_spi_dai, 1);
+ if (ret < 0) {
+ dev_err(&spi->dev, "Failed to register component.\n");
+ goto err_comp;
+ }
+
+ return 0;
+err_comp:
+ snd_soc_unregister_platform(&spi->dev);
+err_plat:
+
+ return 0;
+}
+
+static int rt5514_spi_remove(struct spi_device *spi)
+{
+ snd_soc_unregister_component(&spi->dev);
+ snd_soc_unregister_platform(&spi->dev);
+
+ return 0;
+}
+
+static const struct of_device_id rt5514_of_match[] = {
+ { .compatible = "realtek,rt5514", },
+ {},
+};
+MODULE_DEVICE_TABLE(of, rt5514_of_match);
+
+static struct spi_driver rt5514_spi_driver = {
+ .driver = {
+ .name = "rt5514",
+ .of_match_table = of_match_ptr(rt5514_of_match),
+ },
+ .probe = rt5514_spi_probe,
+ .remove = rt5514_spi_remove,
+};
+module_spi_driver(rt5514_spi_driver);
+
+MODULE_DESCRIPTION("RT5514 SPI driver");
+MODULE_AUTHOR("Oder Chiou <oder_chiou at realtek.com>");
+MODULE_LICENSE("GPL v2");
diff --git a/sound/soc/codecs/rt5514-spi.h b/sound/soc/codecs/rt5514-spi.h
new file mode 100644
index 000000000000..f69b1cdf2f9b
--- /dev/null
+++ b/sound/soc/codecs/rt5514-spi.h
@@ -0,0 +1,38 @@
+/*
+ * rt5514-spi.h -- RT5514 driver
+ *
+ * Copyright 2015 Realtek Semiconductor Corp.
+ * Author: Oder Chiou <oder_chiou at realtek.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __RT5514_SPI_H__
+#define __RT5514_SPI_H__
+
+/**
+ * RT5514_SPI_BUF_LEN is the buffer size of SPI master controller.
+*/
+#define RT5514_SPI_BUF_LEN 240
+
+#define RT5514_BUFFER_VOICE_BASE 0x18001034
+#define RT5514_BUFFER_VOICE_LIMIT 0x18001038
+#define RT5514_BUFFER_VOICE_RP 0x1800103c
+#define RT5514_BUFFER_VOICE_SIZE 0x18001040
+
+/* SPI Command */
+enum {
+ RT5514_SPI_CMD_16_READ = 0,
+ RT5514_SPI_CMD_16_WRITE,
+ RT5514_SPI_CMD_32_READ,
+ RT5514_SPI_CMD_32_WRITE,
+ RT5514_SPI_CMD_BURST_READ,
+ RT5514_SPI_CMD_BURST_WRITE,
+};
+
+int rt5514_spi_burst_read(unsigned int addr, u8 *rxbuf, size_t len);
+int rt5514_spi_burst_write(u32 addr, const u8 *txbuf, size_t len);
+
+#endif /* __RT5514_SPI_H__ */
diff --git a/sound/soc/codecs/rt5514.c b/sound/soc/codecs/rt5514.c
index 879bf60f4965..ecb09891b662 100644
--- a/sound/soc/codecs/rt5514.c
+++ b/sound/soc/codecs/rt5514.c
@@ -30,6 +30,9 @@
#include "rl6231.h"
#include "rt5514.h"
+#if defined(CONFIG_SND_SOC_RT5514_SPI)
+#include "rt5514-spi.h"
+#endif
static const struct reg_sequence rt5514_i2c_patch[] = {
{0x1800101c, 0x00000000},
@@ -110,6 +113,35 @@ static const struct reg_default rt5514_reg[] = {
{RT5514_VENDOR_ID2, 0x10ec5514},
};
+static void rt5514_enable_dsp_prepare(struct rt5514_priv *rt5514)
+{
+ /* Reset */
+ regmap_write(rt5514->i2c_regmap, 0x18002000, 0x000010ec);
+ /* LDO_I_limit */
+ regmap_write(rt5514->i2c_regmap, 0x18002200, 0x00028604);
+ /* I2C bypass enable */
+ regmap_write(rt5514->i2c_regmap, 0xfafafafa, 0x00000001);
+ /* mini-core reset */
+ regmap_write(rt5514->i2c_regmap, 0x18002f00, 0x0005514b);
+ regmap_write(rt5514->i2c_regmap, 0x18002f00, 0x00055149);
+ /* I2C bypass disable */
+ regmap_write(rt5514->i2c_regmap, 0xfafafafa, 0x00000000);
+ /* PIN config */
+ regmap_write(rt5514->i2c_regmap, 0x18002070, 0x00000040);
+ /* PLL3(QN)=RCOSC*(10+2) */
+ regmap_write(rt5514->i2c_regmap, 0x18002240, 0x0000000a);
+ /* PLL3 source=RCOSC, fsi=rt_clk */
+ regmap_write(rt5514->i2c_regmap, 0x18002100, 0x0000000b);
+ /* Power on RCOSC, pll3 */
+ regmap_write(rt5514->i2c_regmap, 0x18002004, 0x00808b81);
+ /* DSP clk source = pll3, ENABLE DSP clk */
+ regmap_write(rt5514->i2c_regmap, 0x18002f08, 0x00000005);
+ /* Enable DSP clk auto switch */
+ regmap_write(rt5514->i2c_regmap, 0x18001114, 0x00000001);
+ /* Reduce DSP power */
+ regmap_write(rt5514->i2c_regmap, 0x18001118, 0x00000001);
+}
+
static bool rt5514_volatile_register(struct device *dev, unsigned int reg)
{
switch (reg) {
@@ -248,6 +280,74 @@ static const DECLARE_TLV_DB_RANGE(bst_tlv,
static const DECLARE_TLV_DB_SCALE(adc_vol_tlv, -17625, 375, 0);
+static int rt5514_dsp_voice_wake_up_get(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct snd_soc_component *component = snd_kcontrol_chip(kcontrol);
+ struct rt5514_priv *rt5514 = snd_soc_component_get_drvdata(component);
+
+ ucontrol->value.integer.value[0] = rt5514->dsp_enabled;
+
+ return 0;
+}
+
+static int rt5514_dsp_voice_wake_up_put(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct snd_soc_component *component = snd_kcontrol_chip(kcontrol);
+ struct rt5514_priv *rt5514 = snd_soc_component_get_drvdata(component);
+ struct snd_soc_codec *codec = rt5514->codec;
+ const struct firmware *fw = NULL;
+
+ if (ucontrol->value.integer.value[0] == rt5514->dsp_enabled)
+ return 0;
+
+ if (snd_soc_codec_get_bias_level(codec) == SND_SOC_BIAS_OFF) {
+ rt5514->dsp_enabled = ucontrol->value.integer.value[0];
+
+ if (rt5514->dsp_enabled) {
+ rt5514_enable_dsp_prepare(rt5514);
+
+ request_firmware(&fw, RT5514_FIRMWARE1, codec->dev);
+ if (fw) {
+#if defined(CONFIG_SND_SOC_RT5514_SPI)
+ rt5514_spi_burst_write(0x4ff60000, fw->data,
+ ((fw->size/8)+1)*8);
+#else
+ dev_err(codec->dev, "There is no SPI driver for"
+ " loading the firmware\n");
+#endif
+ release_firmware(fw);
+ fw = NULL;
+ }
+
+ request_firmware(&fw, RT5514_FIRMWARE2, codec->dev);
+ if (fw) {
+#if defined(CONFIG_SND_SOC_RT5514_SPI)
+ rt5514_spi_burst_write(0x4ffc0000, fw->data,
+ ((fw->size/8)+1)*8);
+#else
+ dev_err(codec->dev, "There is no SPI driver for"
+ " loading the firmware\n");
+#endif
+ release_firmware(fw);
+ fw = NULL;
+ }
+
+ /* DSP run */
+ regmap_write(rt5514->i2c_regmap, 0x18002f00,
+ 0x00055148);
+ } else {
+ regmap_multi_reg_write(rt5514->i2c_regmap,
+ rt5514_i2c_patch, ARRAY_SIZE(rt5514_i2c_patch));
+ regcache_mark_dirty(rt5514->regmap);
+ regcache_sync(rt5514->regmap);
+ }
+ }
+
+ return 0;
+}
+
static const struct snd_kcontrol_new rt5514_snd_controls[] = {
SOC_DOUBLE_TLV("MIC Boost Volume", RT5514_ANA_CTRL_MICBST,
RT5514_SEL_BSTL_SFT, RT5514_SEL_BSTR_SFT, 8, 0, bst_tlv),
@@ -257,6 +357,8 @@ static const struct snd_kcontrol_new rt5514_snd_controls[] = {
SOC_DOUBLE_R_TLV("ADC2 Capture Volume", RT5514_DOWNFILTER1_CTRL1,
RT5514_DOWNFILTER1_CTRL2, RT5514_AD_GAIN_SFT, 127, 0,
adc_vol_tlv),
+ SOC_SINGLE_EXT("DSP Voice Wake Up", SND_SOC_NOPM, 0, 1, 0,
+ rt5514_dsp_voice_wake_up_get, rt5514_dsp_voice_wake_up_put),
};
/* ADC Mixer*/
@@ -365,6 +467,35 @@ static int rt5514_is_sys_clk_from_pll(struct snd_soc_dapm_widget *source,
return 0;
}
+static int rt5514_pre_event(struct snd_soc_dapm_widget *w,
+ struct snd_kcontrol *kcontrol, int event)
+{
+ struct snd_soc_codec *codec = snd_soc_dapm_to_codec(w->dapm);
+ struct rt5514_priv *rt5514 = snd_soc_codec_get_drvdata(codec);
+
+ switch (event) {
+ case SND_SOC_DAPM_PRE_PMU:
+ /**
+ * If the DSP is enabled in start of recording, the DSP
+ * should be disabled, and sync back to normal recording
+ * settings to make sure recording properly.
+ */
+ if (rt5514->dsp_enabled) {
+ rt5514->dsp_enabled = 0;
+ regmap_multi_reg_write(rt5514->i2c_regmap,
+ rt5514_i2c_patch, ARRAY_SIZE(rt5514_i2c_patch));
+ regcache_mark_dirty(rt5514->regmap);
+ regcache_sync(rt5514->regmap);
+ }
+ break;
+
+ default:
+ return 0;
+ }
+
+ return 0;
+}
+
static const struct snd_soc_dapm_widget rt5514_dapm_widgets[] = {
/* Input Lines */
SND_SOC_DAPM_INPUT("DMIC1L"),
@@ -472,6 +603,8 @@ static const struct snd_soc_dapm_widget rt5514_dapm_widgets[] = {
/* Audio Interface */
SND_SOC_DAPM_AIF_OUT("AIF1TX", "AIF1 Capture", 0, SND_SOC_NOPM, 0, 0),
+
+ SND_SOC_DAPM_PRE("DAPM Pre", rt5514_pre_event),
};
static const struct snd_soc_dapm_route rt5514_dapm_routes[] = {
@@ -871,7 +1004,6 @@ static const struct regmap_config rt5514_i2c_regmap = {
.reg_bits = 32,
.val_bits = 32,
- .max_register = RT5514_DSP_MAPPING | RT5514_VENDOR_ID2,
.readable_reg = rt5514_i2c_readable_register,
.cache_type = REGCACHE_NONE,
@@ -944,7 +1076,7 @@ static int rt5514_i2c_probe(struct i2c_client *i2c,
return -ENODEV;
}
- ret = regmap_register_patch(rt5514->i2c_regmap, rt5514_i2c_patch,
+ ret = regmap_multi_reg_write(rt5514->i2c_regmap, rt5514_i2c_patch,
ARRAY_SIZE(rt5514_i2c_patch));
if (ret != 0)
dev_warn(&i2c->dev, "Failed to apply i2c_regmap patch: %d\n",
diff --git a/sound/soc/codecs/rt5514.h b/sound/soc/codecs/rt5514.h
index 6ad8a612f659..6e89e7d46a10 100644
--- a/sound/soc/codecs/rt5514.h
+++ b/sound/soc/codecs/rt5514.h
@@ -225,6 +225,9 @@
#define RT5514_PLL_INP_MAX 40000000
#define RT5514_PLL_INP_MIN 256000
+#define RT5514_FIRMWARE1 "rt5514_dsp_fw1.bin"
+#define RT5514_FIRMWARE2 "rt5514_dsp_fw2.bin"
+
/* System Clock Source */
enum {
RT5514_SCLK_S_MCLK,
@@ -247,6 +250,7 @@ struct rt5514_priv {
int pll_src;
int pll_in;
int pll_out;
+ int dsp_enabled;
};
#endif /* __RT5514_H__ */
--
2.8.1
More information about the Alsa-devel
mailing list