[alsa-devel] [PATCH 2/6] ASoC: sgtl5000: Write all default registers
Clemens Gruber
clemens.gruber at pqgruber.com
Tue Jun 7 01:14:49 CEST 2016
From: Eric Nelson <eric at nelint.com>
If an error occurs writing defaults, produce an error message but
continue writing other registers. The failure of a single write should
not cause catastrophic device failure.
In at least one occurrence, I2C writes of CHIP_ANA_POWER were nacked,
though continuing allowed the device to operate properly.
Signed-off-by: Eric Nelson <eric at nelint.com>
Signed-off-by: Clemens Gruber <clemens.gruber at pqgruber.com>
---
sound/soc/codecs/sgtl5000.c | 13 ++++++-------
1 file changed, 6 insertions(+), 7 deletions(-)
diff --git a/sound/soc/codecs/sgtl5000.c b/sound/soc/codecs/sgtl5000.c
index 9fdce9e..fd8cfec 100644
--- a/sound/soc/codecs/sgtl5000.c
+++ b/sound/soc/codecs/sgtl5000.c
@@ -1220,8 +1220,9 @@ static const struct regmap_config sgtl5000_regmap = {
* and avoid problems like, not being able to probe after an audio playback
* followed by a system reset or a 'reboot' command in Linux
*/
-static int sgtl5000_fill_defaults(struct sgtl5000_priv *sgtl5000)
+static void sgtl5000_fill_defaults(struct i2c_client *client)
{
+ struct sgtl5000_priv *sgtl5000 = i2c_get_clientdata(client);
int i, ret, val, index;
for (i = 0; i < ARRAY_SIZE(sgtl5000_reg_defaults); i++) {
@@ -1229,10 +1230,10 @@ static int sgtl5000_fill_defaults(struct sgtl5000_priv *sgtl5000)
index = sgtl5000_reg_defaults[i].reg;
ret = regmap_write(sgtl5000->regmap, index, val);
if (ret)
- return ret;
+ dev_err(&client->dev,
+ "%s: error %d setting reg 0x%02x to 0x%04x\n",
+ __func__, ret, index, val);
}
-
- return 0;
}
static int sgtl5000_i2c_probe(struct i2c_client *client,
@@ -1365,9 +1366,7 @@ static int sgtl5000_i2c_probe(struct i2c_client *client,
}
/* Ensure sgtl5000 will start with sane register values */
- ret = sgtl5000_fill_defaults(sgtl5000);
- if (ret)
- goto disable_clk;
+ sgtl5000_fill_defaults(client);
ret = snd_soc_register_codec(&client->dev,
&sgtl5000_driver, &sgtl5000_dai, 1);
--
2.8.3
More information about the Alsa-devel
mailing list