[alsa-devel] [PATCH] ALSA: hda - hdmi create spdif ctl based on pcm
Yang, Libin
libin.yang at intel.com
Fri Jan 29 06:59:47 CET 2016
Hi Takashi,
This patch is for DP MST audio, and for hda-mst branch.
Regards,
Libin
> -----Original Message-----
> From: libin.yang at linux.intel.com [mailto:libin.yang at linux.intel.com]
> Sent: Friday, January 29, 2016 1:53 PM
> To: alsa-devel at alsa-project.org; tiwai at suse.de
> Cc: Lin, Mengdong; Yang, Libin; Libin Yang
> Subject: [PATCH] ALSA: hda - hdmi create spdif ctl based on pcm
>
> From: Libin Yang <libin.yang at linux.intel.com>
>
> SPDIF ctl should be based on pcm. Each spdif ctl controls
> one pcm state.
>
> This patch creates spdif based on pcm and no longer
> based on pin.
>
> Signed-off-by: Libin Yang <libin.yang at linux.intel.com>
> ---
> sound/pci/hda/patch_hdmi.c | 27 ++++++++++++++++++---------
> 1 file changed, 18 insertions(+), 9 deletions(-)
>
> diff --git a/sound/pci/hda/patch_hdmi.c b/sound/pci/hda/patch_hdmi.c
> index dfb7c26..2f949fb 100644
> --- a/sound/pci/hda/patch_hdmi.c
> +++ b/sound/pci/hda/patch_hdmi.c
> @@ -2255,6 +2255,7 @@ static int hdmi_pcm_close(struct
> hda_pcm_stream *hinfo,
> hinfo->nid = 0;
>
> mutex_lock(&spec->pcm_lock);
> + snd_hda_spdif_ctls_unassign(codec, pcm_idx);
> clear_bit(pcm_idx, &spec->pcm_in_use);
> pin_idx = hinfo_to_pin_index(codec, hinfo);
> if (spec->dyn_pcm_assign && pin_idx < 0) {
> @@ -2276,8 +2277,6 @@ static int hdmi_pcm_close(struct
> hda_pcm_stream *hinfo,
> pinctl & ~PIN_OUT);
> }
>
> - snd_hda_spdif_ctls_unassign(codec, pcm_idx);
> -
> mutex_lock(&per_pin->lock);
> per_pin->chmap_set = false;
> memset(per_pin->chmap, 0, sizeof(per_pin->chmap));
> @@ -2560,19 +2559,29 @@ static int
> generic_hdmi_build_controls(struct hda_codec *codec)
> err = generic_hdmi_build_jack(codec, pcm_idx);
> if (err < 0)
> return err;
> - }
>
> - for (pin_idx = 0; pin_idx < spec->num_pins; pin_idx++) {
> - struct hdmi_spec_per_pin *per_pin = get_pin(spec,
> pin_idx);
> -
> - err = snd_hda_create_dig_out_ctls(codec,
> + /* create the spdif for each pcm
> + * pin will be bound when monitor is connected
> + */
> + if (spec->dyn_pcm_assign)
> + err = snd_hda_create_dig_out_ctls(codec,
> + 0, spec->cvt_nids[0],
> + HDA_PCM_TYPE_HDMI);
> + else {
> + struct hdmi_spec_per_pin *per_pin =
> + get_pin(spec, pcm_idx);
> + err = snd_hda_create_dig_out_ctls(codec,
> per_pin->pin_nid,
> per_pin->mux_nids[0],
>
> HDA_PCM_TYPE_HDMI);
> + }
> if (err < 0)
> return err;
> - /* pin number is the same with pcm number so far */
> - snd_hda_spdif_ctls_unassign(codec, pin_idx);
> + snd_hda_spdif_ctls_unassign(codec, pcm_idx);
> + }
> +
> + for (pin_idx = 0; pin_idx < spec->num_pins; pin_idx++) {
> + struct hdmi_spec_per_pin *per_pin = get_pin(spec,
> pin_idx);
>
> /* add control for ELD Bytes */
> err = hdmi_create_eld_ctl(codec, pin_idx,
> --
> 1.9.1
More information about the Alsa-devel
mailing list