[alsa-devel] [PATCH v3] ASoC: cs53l30: Add support for Cirrus Logic CS53L30

Charles Keepax ckeepax at opensource.wolfsonmicro.com
Wed Jan 27 11:09:37 CET 2016


On Mon, Jan 25, 2016 at 05:14:43PM -0600, tim.howe at cirrus.com wrote:

Just some very minor comments:

> From: Tim Howe <tim.howe at cirrus.com>
> 

Probably worth including a brief description of the part as a
commit message here.

> Signed-off-by: Tim Howe <tim.howe at cirrus.com>
> ---
>  .../devicetree/bindings/sound/cs53l30.txt          |  21 +
>  sound/soc/codecs/Kconfig                           |   5 +
>  sound/soc/codecs/Makefile                          |   2 +
>  sound/soc/codecs/cs53l30.c                         | 933 +++++++++++++++++++++
>  sound/soc/codecs/cs53l30.h                         | 272 ++++++
>  5 files changed, 1233 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/sound/cs53l30.txt
>  create mode 100644 sound/soc/codecs/cs53l30.c
>  create mode 100644 sound/soc/codecs/cs53l30.h
> 
> diff --git a/Documentation/devicetree/bindings/sound/cs53l30.txt b/Documentation/devicetree/bindings/sound/cs53l30.txt
> new file mode 100644
> index 0000000..a2dff95
> +++ b/Documentation/devicetree/bindings/sound/cs53l30.txt
> @@ -0,0 +1,21 @@
> +CS53L30 audio CODEC
> +
> +Required properties:
> +
> +  - compatible : "cirrus,cs53l30"
> +
> +  - reg : the I2C address of the device
> +
> +Optional properties:
> +
> +  - reset-gpios : a GPIO spec for the reset pin.
> +
> +
> +Example:
> +
> +codec: cs53l30 at 48 {
> +        compatible = "cirrus,cs53l30";
> +        reg = <0x48>;
> +        reset-gpios = <&gpio 54 0>;
> +};
> +
> diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig
> index b3317da..f59aa4b 100644
> --- a/sound/soc/codecs/Kconfig
> +++ b/sound/soc/codecs/Kconfig
> @@ -59,6 +59,7 @@ config SND_SOC_ALL_CODECS
>  	select SND_SOC_CS4271_SPI if SPI_MASTER
>  	select SND_SOC_CS42XX8_I2C if I2C
>  	select SND_SOC_CS4349 if I2C
> +	select SND_SOC_CS53L30 if I2C
>  	select SND_SOC_CX20442 if TTY
>  	select SND_SOC_DA7210 if SND_SOC_I2C_AND_SPI
>  	select SND_SOC_DA7213 if I2C
> @@ -444,6 +445,10 @@ config SND_SOC_CS4349
>  	tristate "Cirrus Logic CS4349 CODEC"
>  	depends on I2C
>  
> +config SND_SOC_CS53L30
> +	tristate "Cirrus Logic CS53L30 CODEC"
> +	depends on I2C
> +
>  config SND_SOC_CX20442
>  	tristate
>  	depends on TTY
> diff --git a/sound/soc/codecs/Makefile b/sound/soc/codecs/Makefile
> index cdadb9b..4f1ab1d 100644
> --- a/sound/soc/codecs/Makefile
> +++ b/sound/soc/codecs/Makefile
> @@ -51,6 +51,7 @@ snd-soc-cs4271-spi-objs := cs4271-spi.o
>  snd-soc-cs42xx8-objs := cs42xx8.o
>  snd-soc-cs42xx8-i2c-objs := cs42xx8-i2c.o
>  snd-soc-cs4349-objs := cs4349.o
> +snd-soc-cs53l30-objs := cs53l30.o
>  snd-soc-cx20442-objs := cx20442.o
>  snd-soc-da7210-objs := da7210.o
>  snd-soc-da7213-objs := da7213.o
> @@ -250,6 +251,7 @@ obj-$(CONFIG_SND_SOC_CS4271_SPI)	+= snd-soc-cs4271-spi.o
>  obj-$(CONFIG_SND_SOC_CS42XX8)	+= snd-soc-cs42xx8.o
>  obj-$(CONFIG_SND_SOC_CS42XX8_I2C) += snd-soc-cs42xx8-i2c.o
>  obj-$(CONFIG_SND_SOC_CS4349)	+= snd-soc-cs4349.o
> +obj-$(CONFIG_SND_SOC_CS53L30)	+= snd-soc-cs53l30.o
>  obj-$(CONFIG_SND_SOC_CX20442)	+= snd-soc-cx20442.o
>  obj-$(CONFIG_SND_SOC_DA7210)	+= snd-soc-da7210.o
>  obj-$(CONFIG_SND_SOC_DA7213)	+= snd-soc-da7213.o
> diff --git a/sound/soc/codecs/cs53l30.c b/sound/soc/codecs/cs53l30.c
> new file mode 100644
> index 0000000..3d5cac9
> +++ b/sound/soc/codecs/cs53l30.c
> @@ -0,0 +1,933 @@
> +/*
> + * cs53l30.c  --  CS53l30 ALSA Soc Audio driver
> + *
> + * Copyright 2015 Cirrus Logic, Inc.
> + *
> + * Authors: Paul Handrigan <Paul.Handrigan at cirrus.com>,
> + *          Tim Howe <Tim.Howe at cirrus.com>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + *
> + */
> +
> +#include <linux/module.h>
> +#include <linux/moduleparam.h>
> +#include <linux/kernel.h>
> +#include <linux/init.h>
> +#include <linux/delay.h>
> +#include <linux/gpio.h>
> +#include <linux/gpio/consumer.h>
> +#include <linux/of_gpio.h>
> +#include <linux/platform_device.h>
> +#include <linux/pm.h>
> +#include <linux/i2c.h>
> +#include <linux/of_device.h>
> +#include <linux/regmap.h>
> +#include <linux/slab.h>
> +#include <sound/core.h>
> +#include <sound/pcm.h>
> +#include <sound/pcm_params.h>
> +#include <sound/soc.h>
> +#include <sound/soc-dapm.h>
> +#include <sound/initval.h>
> +#include <sound/tlv.h>
> +#include "cs53l30.h"
> +
> +struct  cs53l30_private {
> +	struct regmap			*regmap;
> +	struct gpio_desc		*reset_gpio;
> +	u8				asp_config_ctl;
> +	u32				mclk;
> +};
> +
> +static const struct reg_default cs53l30_reg_defaults[] = {
> +	{ CS53L30_PWRCTL,		THMS_PDN },
> +	{ CS53L30_MCLKCTL,		MCLK_DIV_DFLT },
> +	{ CS53L30_INT_SR_CTL,		INTERNAL_FS_DFLT },
> +	{ CS53L30_MICBIAS_CTL,		MIC_BIAS_DFLT },
> +	{ CS53L30_ASPCFG_CTL,		ASP_RATE_48K },
> +	{ CS53L30_ASP1_CTL,		ASP1_TDM_PDN },
> +	{ CS53L30_ASP1_TDMTX_CTL1,	ASP1_CHX_TX_DFLT_SLT47 },
> +	{ CS53L30_ASP1_TDMTX_CTL2,	ASP1_CHX_TX_DFLT_SLT47 },
> +	{ CS53L30_ASP1_TDMTX_CTL3,	ASP1_CHX_TX_DFLT_SLT47 },
> +	{ CS53L30_ASP1_TDMTX_CTL4,	ASP1_CHX_TX_DFLT_SLT47 },
> +	{ CS53L30_ASP1_TDMTX_EN1,	ASP_TX_DISABLED },
> +	{ CS53L30_ASP1_TDMTX_EN2,	ASP_TX_DISABLED },
> +	{ CS53L30_ASP1_TDMTX_EN3,	ASP_TX_DISABLED },
> +	{ CS53L30_ASP1_TDMTX_EN4,	ASP_TX_DISABLED },
> +	{ CS53L30_ASP1_TDMTX_EN5,	ASP_TX_DISABLED },
> +	{ CS53L30_ASP1_TDMTX_EN6,	ASP_TX_DISABLED },
> +	{ CS53L30_ASP2_CTL,		ASP2_CTRL_DFLT },
> +	{ CS53L30_SFT_RAMP,		SFT_RMP_DFLT },
> +	{ CS53L30_LRCLK_CTL1,		LRCK_CTLX_DFLT },
> +	{ CS53L30_LRCLK_CTL2,		LRCK_CTLX_DFLT },
> +	{ CS53L30_MUTEP_CTL1,		MUTEP_CTRL1_DFLT },
> +	{ CS53L30_MUTEP_CTL2,		MUTE_PDN_ULP },
> +	{ CS53L30_INBIAS_CTL1,		INBIAS_CTLX_DFLT },
> +	{ CS53L30_INBIAS_CTL2,		INBIAS_CTLX_DFLT },
> +	{ CS53L30_DMIC1_STR_CTL,	DMIC1_STEREO_DFLT },
> +	{ CS53L30_DMIC2_STR_CTL,	DMIC2_STEREO_DFLT },
> +	{ CS53L30_ADCDMIC1_CTL1,	ADC1_ON_CH_AB_IN },
> +	{ CS53L30_ADCDMIC1_CTL2,	ADC1_DMIC1_CTL2_DFLT },
> +	{ CS53L30_ADC1_CTL3,		ADC1_HPF_EN },
> +	{ CS53L30_ADC1_NG_CTL,		ADCX_ZERO_DFLT },
> +	{ CS53L30_ADC1A_AFE_CTL,	ADCX_ZERO_DFLT },
> +	{ CS53L30_ADC1B_AFE_CTL,	ADCX_ZERO_DFLT },
> +	{ CS53L30_ADC1A_DIG_VOL,	ADCX_ZERO_DFLT },
> +	{ CS53L30_ADC1B_DIG_VOL,	ADCX_ZERO_DFLT },
> +	{ CS53L30_ADCDMIC2_CTL1,	ADC2_ON_CH_AB_IN },
> +	{ CS53L30_ADCDMIC2_CTL2,	ADCX_ZERO_DFLT },
> +	{ CS53L30_ADC2_CTL3,		ADC2_HPF_EN },
> +	{ CS53L30_ADC2_NG_CTL,		ADCX_ZERO_DFLT },
> +	{ CS53L30_ADC2A_AFE_CTL,	ADCX_ZERO_DFLT },
> +	{ CS53L30_ADC2B_AFE_CTL,	ADCX_ZERO_DFLT },
> +	{ CS53L30_ADC2A_DIG_VOL,	ADCX_ZERO_DFLT },
> +	{ CS53L30_ADC2B_DIG_VOL,	ADCX_ZERO_DFLT },
> +	{ CS53L30_INT_MASK,		DEVICE_INT_MASK },
> +};
> +
> +static bool cs53l30_volatile_register(struct device *dev, unsigned int reg)
> +{
> +	if (reg == CS53L30_IS)
> +		return true;
> +	else
> +		return false;
> +}
> +
> +static bool cs53l30_readable_register(struct device *dev, unsigned int reg)
> +{
> +	switch (reg) {
> +	case CS53L30_DEVID_AB:
> +	case CS53L30_DEVID_CD:
> +	case CS53L30_DEVID_E:
> +	case CS53L30_REVID:
> +	case CS53L30_PWRCTL:
> +	case CS53L30_MCLKCTL:
> +	case CS53L30_INT_SR_CTL:
> +	case CS53L30_MICBIAS_CTL:
> +	case CS53L30_ASPCFG_CTL:
> +	case CS53L30_ASP1_CTL:
> +	case CS53L30_ASP1_TDMTX_CTL1:
> +	case CS53L30_ASP1_TDMTX_CTL2:
> +	case CS53L30_ASP1_TDMTX_CTL3:
> +	case CS53L30_ASP1_TDMTX_CTL4:
> +	case CS53L30_ASP1_TDMTX_EN1:
> +	case CS53L30_ASP1_TDMTX_EN2:
> +	case CS53L30_ASP1_TDMTX_EN3:
> +	case CS53L30_ASP1_TDMTX_EN4:
> +	case CS53L30_ASP1_TDMTX_EN5:
> +	case CS53L30_ASP1_TDMTX_EN6:
> +	case CS53L30_ASP2_CTL:
> +	case CS53L30_SFT_RAMP:
> +	case CS53L30_LRCLK_CTL1:
> +	case CS53L30_LRCLK_CTL2:
> +	case CS53L30_MUTEP_CTL1:
> +	case CS53L30_MUTEP_CTL2:
> +	case CS53L30_INBIAS_CTL1:
> +	case CS53L30_INBIAS_CTL2:
> +	case CS53L30_DMIC1_STR_CTL:
> +	case CS53L30_DMIC2_STR_CTL:
> +	case CS53L30_ADCDMIC1_CTL1:
> +	case CS53L30_ADCDMIC1_CTL2:
> +	case CS53L30_ADC1_CTL3:
> +	case CS53L30_ADC1_NG_CTL:
> +	case CS53L30_ADC1A_AFE_CTL:
> +	case CS53L30_ADC1B_AFE_CTL:
> +	case CS53L30_ADC1A_DIG_VOL:
> +	case CS53L30_ADC1B_DIG_VOL:
> +	case CS53L30_ADCDMIC2_CTL1:
> +	case CS53L30_ADCDMIC2_CTL2:
> +	case CS53L30_ADC2_CTL3:
> +	case CS53L30_ADC2_NG_CTL:
> +	case CS53L30_ADC2A_AFE_CTL:
> +	case CS53L30_ADC2B_AFE_CTL:
> +	case CS53L30_ADC2A_DIG_VOL:
> +	case CS53L30_ADC2B_DIG_VOL:
> +	case CS53L30_INT_MASK:
> +		return true;
> +	default:
> +		return false;
> +	}
> +}
> +
> +static DECLARE_TLV_DB_SCALE(adc_boost_tlv, 0, 2000, 0);
> +static DECLARE_TLV_DB_SCALE(adc_ng_boost_tlv, 0, 3000, 0);
> +static DECLARE_TLV_DB_SCALE(pga_tlv, -600, 50, 0);
> +
> +static DECLARE_TLV_DB_SCALE(dig_tlv, -9600, 100, 1);
> +
> +static const char * const input1_sel_text[] = { "DMIC1 On AB In",
> +	"DMIC1 On A In", "DMIC1 On B In", "ADC1 On AB In", "ADC1 On A In",
> +	"ADC1 On B In", "DMIC1 Off ADC1 Off", };
> +
> +unsigned int const input1_sel_values[] = { DMIC1_ON_CH_AB_IN, DMIC1_ON_CH_A_IN,
> +	DMIC1_ON_CH_B_IN, ADC1_ON_CH_AB_IN, ADC1_ON_CH_A_IN, ADC1_ON_CH_B_IN,
> +	DMIC1_OFF_ADC1_OFF, };
> +
> +static const char * const input2_sel_text[] = { "DMIC2 On AB In",
> +	"DMIC2 On A In", "DMIC2 On B In", "ADC2 On AB In", "ADC2 On A In",
> +	"ADC2 On B In", "DMIC2 Off ADC2 Off", };
> +
> +unsigned int const input2_sel_values[] = { DMIC2_ON_CH_AB_IN, DMIC2_ON_CH_A_IN,
> +	DMIC2_ON_CH_B_IN, ADC2_ON_CH_AB_IN, ADC2_ON_CH_A_IN, ADC2_ON_CH_B_IN,
> +	DMIC2_OFF_ADC2_OFF, };
> +
> +static const char * const input1_route_sel_text[] = { "ADC1_SEL",
> +						      "DMIC1_SEL" };
> +
> +static const struct soc_enum input1_route_sel_enum =
> +	SOC_ENUM_SINGLE(CS53L30_ADCDMIC1_CTL1, 0,
> +		ARRAY_SIZE(input1_route_sel_text), input1_route_sel_text);
> +
> +static SOC_VALUE_ENUM_SINGLE_DECL(input1_sel_enum, CS53L30_ADCDMIC1_CTL1, 0,
> +		ADC1_DMIC1_PDN_MASK, input1_sel_text, input1_sel_values);
> +
> +static const struct snd_kcontrol_new input1_route_sel_mux =
> +	SOC_DAPM_ENUM("Input 1 Route", input1_route_sel_enum);
> +
> +static const char * const input2_route_sel_text[] = { "ADC2_SEL",
> +						      "DMIC2_SEL" };
> +
> +/* Note: CS53L30_ADCDMIC1_CTL1 CH_TYPE controls inputs 1 and 2 */
> +static const struct soc_enum input2_route_sel_enum =
> +	SOC_ENUM_SINGLE(CS53L30_ADCDMIC1_CTL1, 0,
> +		ARRAY_SIZE(input2_route_sel_text), input2_route_sel_text);
> +
> +static SOC_VALUE_ENUM_SINGLE_DECL(input2_sel_enum, CS53L30_ADCDMIC2_CTL1, 0,
> +		ADC1_DMIC1_PDN_MASK, input2_sel_text, input2_sel_values);
> +
> +static const struct snd_kcontrol_new input2_route_sel_mux =
> +	SOC_DAPM_ENUM("Input 2 Route", input2_route_sel_enum);
> +
> +/*
> + * TB = 6144*(MCLK(int) scaling factor)/MCLK(internal)
> + * TB - Time base
> + * NOTE: If MCLK_INT_SCALE = 0, then TB=1
> + */
> +static const char * const cs53l30_ng_delay_text[] = {
> +	"TB*50ms", "TB*100ms", "TB*150ms", "TB*200ms" };
> +
> +static const struct soc_enum adc1_ng_delay_enum =
> +	SOC_ENUM_SINGLE(CS53L30_ADC1_NG_CTL, 0,
> +		ARRAY_SIZE(cs53l30_ng_delay_text), cs53l30_ng_delay_text);
> +
> +static const struct soc_enum adc2_ng_delay_enum =
> +	SOC_ENUM_SINGLE(CS53L30_ADC2_NG_CTL, 0,
> +		ARRAY_SIZE(cs53l30_ng_delay_text), cs53l30_ng_delay_text);
> +
> +/* The noise gate threshold selected will depend on NG Boost */
> +static const char * const cs53l30_ng_thres_text[] = {
> +	"-64dB/-34dB", "-66dB/-36dB", "-70dB/-40dB", "-73dB/-43dB",
> +	"-76dB/-46dB", "-82dB/-52dB", "-58dB", "-64dB"};
> +
> +static const struct soc_enum adc1_ng_thres_enum =
> +	SOC_ENUM_SINGLE(CS53L30_ADC1_NG_CTL, 2,
> +		ARRAY_SIZE(cs53l30_ng_thres_text), cs53l30_ng_thres_text);
> +
> +static const struct soc_enum adc2_ng_thres_enum =
> +	SOC_ENUM_SINGLE(CS53L30_ADC2_NG_CTL, 2,
> +		ARRAY_SIZE(cs53l30_ng_thres_text), cs53l30_ng_thres_text);
> +
> +/* ADC Preamp gain select */
> +static const char * const cs53l30_preamp_gain_sel_text[] = {
> +	"0dB", "10dB", "20dB"};
> +
> +static const struct soc_enum adc1a_preamp_gain_enum =
> +	SOC_ENUM_SINGLE(CS53L30_ADC1A_AFE_CTL, 6,
> +		ARRAY_SIZE(cs53l30_preamp_gain_sel_text),
> +		cs53l30_preamp_gain_sel_text);
> +
> +static const struct soc_enum adc1b_preamp_gain_enum =
> +	SOC_ENUM_SINGLE(CS53L30_ADC1B_AFE_CTL, 6,
> +		ARRAY_SIZE(cs53l30_preamp_gain_sel_text),
> +		cs53l30_preamp_gain_sel_text);
> +
> +static const struct soc_enum adc2a_preamp_gain_enum =
> +	SOC_ENUM_SINGLE(CS53L30_ADC2A_AFE_CTL, 6,
> +		ARRAY_SIZE(cs53l30_preamp_gain_sel_text),
> +		cs53l30_preamp_gain_sel_text);
> +
> +static const struct soc_enum adc2b_preamp_gain_enum =
> +	SOC_ENUM_SINGLE(CS53L30_ADC2B_AFE_CTL, 6,
> +		ARRAY_SIZE(cs53l30_preamp_gain_sel_text),
> +		cs53l30_preamp_gain_sel_text);
> +
> +/* Set MIC Bias Voltage Control */
> +static const char * const cs53l30_micbias_text[] = {
> +	"HiZ", "1.8V", "2.75V"};
> +
> +static const struct soc_enum micbias_enum =
> +	SOC_ENUM_SINGLE(CS53L30_MICBIAS_CTL, 0,
> +		ARRAY_SIZE(cs53l30_micbias_text),
> +		cs53l30_micbias_text);
> +
> +/* Corner frequencies are with an Fs of 48kHz. */
> +static const char * const hpf_corner_freq_text[] = {
> +	"1.86Hz", "120Hz", "235Hz", "466Hz"};
> +
> +static const struct soc_enum adc1_hpf_enum =
> +	SOC_ENUM_SINGLE(CS53L30_ADC1_CTL3, 1,
> +		ARRAY_SIZE(hpf_corner_freq_text), hpf_corner_freq_text);
> +
> +static const struct soc_enum adc2_hpf_enum =
> +	SOC_ENUM_SINGLE(CS53L30_ADC2_CTL3, 1,
> +		ARRAY_SIZE(hpf_corner_freq_text), hpf_corner_freq_text);
> +
> +static const struct snd_kcontrol_new cs53l30_snd_controls[] = {
> +	SOC_SINGLE("Digital Soft-Ramp Switch", CS53L30_SFT_RAMP, 5, 1, 0),
> +	SOC_SINGLE("ADC1 Noise Gate Ganging Switch",
> +		CS53L30_ADC1_CTL3, 0, 1, 0),
> +	SOC_SINGLE("ADC2 Noise Gate Ganging Switch",
> +		CS53L30_ADC2_CTL3, 0, 1, 0),
> +	SOC_SINGLE("ADC1A Noise Gate Enable Switch",
> +		CS53L30_ADC1_NG_CTL, 6, 1, 0),
> +	SOC_SINGLE("ADC1B Noise Gate Enable Switch",
> +		CS53L30_ADC1_NG_CTL, 7, 1, 0),
> +	SOC_SINGLE("ADC2A Noise Gate Enable Switch",
> +		CS53L30_ADC2_NG_CTL, 6, 1, 0),
> +	SOC_SINGLE("ADC2B Noise Gate Enable Switch",
> +		CS53L30_ADC2_NG_CTL, 7, 1, 0),
> +	SOC_SINGLE("ADC1 Notch Filter Switch",
> +		CS53L30_ADCDMIC1_CTL2, 7, 1, 1),
> +	SOC_SINGLE("ADC2 Notch Filter Switch",
> +		CS53L30_ADCDMIC2_CTL2, 7, 1, 1),
> +	SOC_SINGLE("ADC1A Invert Switch",
> +		CS53L30_ADCDMIC1_CTL2, 4, 1, 0),
> +	SOC_SINGLE("ADC1B Invert Switch",
> +		CS53L30_ADCDMIC1_CTL2, 5, 1, 0),
> +	SOC_SINGLE("ADC2A Invert Switch",
> +		CS53L30_ADCDMIC2_CTL2, 4, 1, 0),
> +	SOC_SINGLE("ADC2B Invert Switch",
> +		CS53L30_ADCDMIC2_CTL2, 5, 1, 0),
> +
> +	SOC_SINGLE_TLV("ADC1A Digital Boost Volume",
> +			CS53L30_ADCDMIC1_CTL2, 0, 1, 0, adc_boost_tlv),
> +	SOC_SINGLE_TLV("ADC1B Digital Boost Volume",
> +		       CS53L30_ADCDMIC1_CTL2, 1, 1, 0, adc_boost_tlv),
> +	SOC_SINGLE_TLV("ADC2A Digital Boost Volume",
> +			CS53L30_ADCDMIC2_CTL2, 0, 1, 0, adc_boost_tlv),
> +	SOC_SINGLE_TLV("ADC2B Digital Boost Volume",
> +		       CS53L30_ADCDMIC2_CTL2, 1, 1, 0, adc_boost_tlv),
> +	SOC_SINGLE_TLV("ADC1 NG Boost Volume",
> +		       CS53L30_ADC1_NG_CTL, 5, 1, 0, adc_ng_boost_tlv),
> +	SOC_SINGLE_TLV("ADC2 NG Boost Volume",
> +		       CS53L30_ADC2_NG_CTL, 5, 1, 0, adc_ng_boost_tlv),
> +
> +	SOC_ENUM("Input 1 Channel Select", input1_sel_enum),
> +	SOC_ENUM("Input 2 Channel Select", input2_sel_enum),
> +
> +	SOC_ENUM("ADC1 HPF Select", adc1_hpf_enum),
> +	SOC_ENUM("ADC2 HPF Select", adc2_hpf_enum),
> +	SOC_ENUM("ADC1 NG Threshold", adc1_ng_thres_enum),
> +	SOC_ENUM("ADC2 NG Threshold", adc2_ng_thres_enum),
> +	SOC_ENUM("ADC1 NG Delay", adc1_ng_delay_enum),
> +	SOC_ENUM("ADC2 NG Delay", adc2_ng_delay_enum),
> +	SOC_ENUM("ADC1A Pre Amp Gain", adc1a_preamp_gain_enum),
> +	SOC_ENUM("ADC1B Pre Amp Gain", adc1b_preamp_gain_enum),
> +	SOC_ENUM("ADC2A Pre Amp Gain", adc2a_preamp_gain_enum),
> +	SOC_ENUM("ADC2B Pre Amp Gain", adc2b_preamp_gain_enum),
> +	SOC_ENUM("Mic Bias Voltage Select", micbias_enum),
> +
> +	SOC_SINGLE_SX_TLV("ADC1A PGA Volume",
> +		    CS53L30_ADC1A_AFE_CTL, 0, 0x34, 0x18, pga_tlv),
> +	SOC_SINGLE_SX_TLV("ADC1B PGA Volume",
> +		    CS53L30_ADC1B_AFE_CTL, 0, 0x34, 0x18, pga_tlv),
> +	SOC_SINGLE_SX_TLV("ADC2A PGA Volume",
> +		    CS53L30_ADC2A_AFE_CTL, 0, 0x34, 0x18, pga_tlv),
> +	SOC_SINGLE_SX_TLV("ADC2B PGA Volume",
> +		    CS53L30_ADC2B_AFE_CTL, 0, 0x34, 0x18, pga_tlv),
> +
> +	SOC_SINGLE_SX_TLV("ADC1A Digital Volume",
> +		    CS53L30_ADC1A_DIG_VOL, 0, 0xA0, 0x0C, dig_tlv),
> +	SOC_SINGLE_SX_TLV("ADC1B Digital Volume",
> +		    CS53L30_ADC1B_DIG_VOL, 0, 0xA0, 0x0C, dig_tlv),
> +	SOC_SINGLE_SX_TLV("ADC2A Digital Volume",
> +		    CS53L30_ADC2A_DIG_VOL, 0, 0xA0, 0x0C, dig_tlv),
> +	SOC_SINGLE_SX_TLV("ADC2B Digital Volume",
> +		    CS53L30_ADC2B_DIG_VOL, 0, 0xA0, 0x0C, dig_tlv),
> +};
> +
> +static int cs53l30_asp_sdout_event(struct snd_soc_dapm_widget *w,
> +	struct snd_kcontrol *kcontrol, int event)
> +{
> +	struct snd_soc_codec *codec = snd_soc_dapm_to_codec(w->dapm);
> +	struct cs53l30_private *priv = snd_soc_codec_get_drvdata(codec);
> +
> +	switch (event) {
> +	case SND_SOC_DAPM_PRE_PMU:
> +		regmap_update_bits(priv->regmap, CS53L30_ASP1_CTL,
> +				   ASP1_3ST, 0);
> +		break;
> +	case SND_SOC_DAPM_POST_PMD:
> +		regmap_update_bits(priv->regmap, CS53L30_ASP1_CTL,
> +				   ASP1_3ST, 1);
> +		break;
> +	default:
> +		pr_err("Invalid event = 0x%x\n", event);
> +		return -EINVAL;
> +	}
> +
> +	return 0;
> +}
> +
> +static const struct snd_soc_dapm_widget cs53l30_dapm_widgets[] = {
> +	SND_SOC_DAPM_INPUT("IN1_DMIC1"),
> +	SND_SOC_DAPM_INPUT("IN2"),
> +	SND_SOC_DAPM_INPUT("IN3_DMIC2"),
> +	SND_SOC_DAPM_INPUT("IN4"),
> +	SND_SOC_DAPM_SUPPLY("MIC1 Bias", CS53L30_MICBIAS_CTL, 4, 1, NULL, 0),
> +	SND_SOC_DAPM_SUPPLY("MIC2 Bias", CS53L30_MICBIAS_CTL, 5, 1, NULL, 0),
> +	SND_SOC_DAPM_SUPPLY("MIC3 Bias", CS53L30_MICBIAS_CTL, 6, 1, NULL, 0),
> +	SND_SOC_DAPM_SUPPLY("MIC4 Bias", CS53L30_MICBIAS_CTL, 7, 1, NULL, 0),
> +
> +	SND_SOC_DAPM_AIF_OUT_E("ASP_SDOUT1", NULL,  0,
> +			       CS53L30_ASP1_CTL, ASP1_SDOUT_PDN,
> +			1, cs53l30_asp_sdout_event,
> +			(SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMD)),

Indentation here is a bit odd.

> +	SND_SOC_DAPM_AIF_OUT_E("ASP_SDOUT2", NULL,  0,
> +			       CS53L30_ASP2_CTL, ASP2_SDOUT_PDN,
> +			1, cs53l30_asp_sdout_event,
> +			(SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMD)),

Ditto.

> +
> +	SND_SOC_DAPM_MUX("Input Mux 1", SND_SOC_NOPM, 0, 0,
> +			 &input1_route_sel_mux),
> +	SND_SOC_DAPM_MUX("Input Mux 2", SND_SOC_NOPM, 0, 0,
> +			 &input2_route_sel_mux),
> +
> +	SND_SOC_DAPM_ADC("ADC1A", NULL, CS53L30_ADCDMIC1_CTL1, 6, 1),
> +	SND_SOC_DAPM_ADC("ADC1B", NULL, CS53L30_ADCDMIC1_CTL1, 7, 1),
> +	SND_SOC_DAPM_ADC("ADC2A", NULL, CS53L30_ADCDMIC2_CTL1, 6, 1),
> +	SND_SOC_DAPM_ADC("ADC2B", NULL, CS53L30_ADCDMIC2_CTL1, 7, 1),
> +	SND_SOC_DAPM_ADC("DMIC1", NULL, CS53L30_ADCDMIC1_CTL1, 2, 1),
> +	SND_SOC_DAPM_ADC("DMIC2", NULL, CS53L30_ADCDMIC2_CTL1, 2, 1),
> +};
> +
> +static const struct snd_soc_dapm_route cs53l30_audio_map[] = {
> +
> +	/* ADC Input Paths */
> +	{"ADC1A", NULL, "IN1_DMIC1"},
> +	{"Input Mux 1", "ADC1_SEL", "ADC1A"},
> +	{"ADC1B", NULL, "IN2"},
> +
> +	{"ADC2A", NULL, "IN3_DMIC2"},
> +	{"Input Mux 2", "ADC2_SEL", "ADC2A"},
> +	{"ADC2B", NULL, "IN4"},
> +
> +	/* MIC Bias Paths */
> +	{"ADC1A", NULL, "MIC1 Bias"},
> +	{"ADC1B", NULL, "MIC2 Bias"},
> +	{"ADC2A", NULL, "MIC3 Bias"},
> +	{"ADC2B", NULL, "MIC4 Bias"},
> +
> +	/* DMIC Paths */
> +	{"DMIC1", NULL, "IN1_DMIC1"},
> +	{"Input Mux 1", "DMIC1_SEL", "DMIC1"},
> +
> +	{"DMIC2", NULL, "IN3_DMIC2"},
> +	{"Input Mux 2", "DMIC2_SEL", "DMIC2"},
> +
> +	/* Output Paths */
> +	{"ASP_SDOUT1", NULL, "ADC1A" },
> +	{"ASP_SDOUT1", NULL, "Input Mux 1"},
> +	{"ASP_SDOUT1", NULL, "ADC1B"},
> +
> +	{"ASP_SDOUT2", NULL, "ADC2A"},
> +	{"ASP_SDOUT2", NULL, "Input Mux 2"},
> +	{"ASP_SDOUT2", NULL, "ADC2B"},
> +
> +	{"ASP1 Capture", NULL, "ASP_SDOUT1"},
> +	{"ASP2 Capture", NULL, "ASP_SDOUT2"},
> +};
> +
> +struct cs53l30_mclk_div {
> +	u32 mclk;
> +	u32 srate;
> +	u8 asp_rate;
> +	u8 internal_fs_ratio;
> +	u8 mclk_int_scale;
> +};
> +
> +static struct cs53l30_mclk_div cs53l30_mclk_coeffs[] = {
> +	/* NOTE: Enable MCLK_INT_SCALE to save power. */
> +
> +	/* MCLK, Sample Rate, asp_rate, internal_fs_ratio, mclk_int_scale */
> +	{5644800, 11025, 0x4, 1, 1},
> +	{5644800, 22050, 0x8, 1, 1},
> +	{5644800, 44100, 0xC, 1, 1},
> +
> +	{6000000,  8000, 0x1, 0, 1},
> +	{6000000, 11025, 0x2, 0, 1},
> +	{6000000, 12000, 0x4, 0, 1},
> +	{6000000, 16000, 0x5, 0, 1},
> +	{6000000, 22050, 0x6, 0, 1},
> +	{6000000, 24000, 0x8, 0, 1},
> +	{6000000, 32000, 0x9, 0, 1},
> +	{6000000, 44100, 0xA, 0, 1},
> +	{6000000, 48000, 0xC, 0, 1},
> +
> +	{6144000,  8000, 0x1, 1, 1},
> +	{6144000, 11025, 0x2, 1, 1},
> +	{6144000, 12000, 0x4, 1, 1},
> +	{6144000, 16000, 0x5, 1, 1},
> +	{6144000, 22050, 0x6, 1, 1},
> +	{6144000, 24000, 0x8, 1, 1},
> +	{6144000, 32000, 0x9, 1, 1},
> +	{6144000, 44100, 0xA, 1, 1},
> +	{6144000, 48000, 0xC, 1, 1},
> +
> +	{6400000,  8000, 0x1, 1, 1},
> +	{6400000, 11025, 0x2, 1, 1},
> +	{6400000, 12000, 0x4, 1, 1},
> +	{6400000, 16000, 0x5, 1, 1},
> +	{6400000, 22050, 0x6, 1, 1},
> +	{6400000, 24000, 0x8, 1, 1},
> +	{6400000, 32000, 0x9, 1, 1},
> +	{6400000, 44100, 0xA, 1, 1},
> +	{6400000, 48000, 0xC, 1, 1},
> +};
> +
> +struct cs53l30_mclkx_div {
> +	u32 mclkx;
> +	u8 ratio;
> +	u8 mclkdiv;
> +};
> +
> +static struct cs53l30_mclkx_div cs53l30_mclkx_coeffs[] = {
> +	{5644800,  1, 0},
> +	{6000000,  1, 0},
> +	{6144000,  1, 0},
> +	{11289600, 2, 1},
> +	{12288000, 2, 1},
> +	{12000000, 2, 1},
> +	{19200000, 3, 2},
> +};
> +
> +static int cs53l30_get_mclkx_coeff(int mclkx)
> +{
> +	int i;
> +
> +	for (i = 0; i < ARRAY_SIZE(cs53l30_mclkx_coeffs); i++) {
> +		if (cs53l30_mclkx_coeffs[i].mclkx == mclkx)
> +			return i;
> +	}
> +	return -EINVAL;
> +}
> +
> +static int cs53l30_get_mclk_coeff(int mclk, int srate)
> +{
> +	int i;
> +
> +	for (i = 0; i < ARRAY_SIZE(cs53l30_mclk_coeffs); i++) {
> +		if (cs53l30_mclk_coeffs[i].mclk == mclk &&
> +		    cs53l30_mclk_coeffs[i].srate == srate)
> +			return i;
> +	}
> +	return -EINVAL;
> +
> +}
> +
> +static int cs53l30_set_sysclk(struct snd_soc_dai *dai,
> +			      int clk_id, unsigned int freq, int dir)
> +{
> +	struct snd_soc_codec *codec = dai->codec;
> +	struct cs53l30_private *priv = snd_soc_codec_get_drvdata(codec);
> +
> +	int mclkx_coeff;
> +	u32 mclk;
> +	unsigned int mclk_ctl;
> +
> +	/* MCLKX -> MCLK */
> +	mclkx_coeff = cs53l30_get_mclkx_coeff(freq);
> +	if (mclkx_coeff < 0)
> +		return mclkx_coeff;
> +
> +	mclk = cs53l30_mclkx_coeffs[mclkx_coeff].mclkx /
> +		cs53l30_mclkx_coeffs[mclkx_coeff].ratio;
> +
> +	regmap_read(priv->regmap, CS53L30_MCLKCTL, &mclk_ctl);
> +	mclk_ctl &= ~MCLK_DIV;
> +	mclk_ctl |= cs53l30_mclkx_coeffs[mclkx_coeff].mclkdiv;
> +
> +	regmap_write(priv->regmap, CS53L30_MCLKCTL, mclk_ctl);

This looks like it should be a regmap_update_bits.

> +	priv->mclk = mclk;
> +	return 0;
> +}
> +
> +static int cs53l30_set_dai_fmt(struct snd_soc_dai *codec_dai, unsigned int fmt)
> +{
> +	struct snd_soc_codec *codec = codec_dai->codec;
> +	struct cs53l30_private *priv = snd_soc_codec_get_drvdata(codec);
> +	unsigned int asp_config_ctl;
> +
> +	regmap_read(priv->regmap, CS53L30_ASPCFG_CTL, &asp_config_ctl);
> +
> +	switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
> +	case SND_SOC_DAIFMT_CBM_CFM:
> +		asp_config_ctl |= ASP_MS;
> +		break;
> +
> +	case SND_SOC_DAIFMT_CBS_CFS:
> +		asp_config_ctl &= ~ASP_MS;
> +		break;
> +
> +	default:
> +		return -EINVAL;
> +	}
> +
> +	/* Check to see if the SCLK is inverted */
> +	if (fmt & (SND_SOC_DAIFMT_IB_NF | SND_SOC_DAIFMT_IB_IF))
> +		asp_config_ctl |= ASP_SCLK_INV;
> +	else
> +		asp_config_ctl &= ~ASP_SCLK_INV;
> +
> +	priv->asp_config_ctl = asp_config_ctl;
> +	return 0;
> +}
> +
> +static int cs53l30_pcm_hw_params(struct snd_pcm_substream *substream,
> +				 struct snd_pcm_hw_params *params,
> +				 struct snd_soc_dai *dai)
> +{
> +	struct snd_soc_codec *codec = dai->codec;
> +	struct cs53l30_private *priv = snd_soc_codec_get_drvdata(codec);
> +	int mclk_coeff;
> +	int srate = params_rate(params);
> +	unsigned int int_sr_ctl, mclk_ctl;
> +
> +	/* MCLK -> srate */
> +	mclk_coeff =
> +	    cs53l30_get_mclk_coeff(priv->mclk, srate);

Looks like this should be on a single line.

> +	if (mclk_coeff < 0)
> +		return -EINVAL;
> +
> +	regmap_write(priv->regmap, CS53L30_ASPCFG_CTL, priv->asp_config_ctl);
> +	regmap_read(priv->regmap, CS53L30_INT_SR_CTL, &int_sr_ctl);
> +	if (cs53l30_mclk_coeffs[mclk_coeff].internal_fs_ratio)
> +		int_sr_ctl |= INTERNAL_FS_RATIO;
> +	else
> +		int_sr_ctl &= ~INTERNAL_FS_RATIO;
> +	regmap_write(priv->regmap, CS53L30_INT_SR_CTL, int_sr_ctl);

regmap_update_bits?

> +
> +	regmap_read(priv->regmap, CS53L30_MCLKCTL, &mclk_ctl);
> +	if (cs53l30_mclk_coeffs[mclk_coeff].mclk_int_scale)
> +		mclk_ctl |= MCLK_INT_SCALE;
> +	else
> +		mclk_ctl &= ~MCLK_INT_SCALE;
> +
> +	regmap_write(priv->regmap, CS53L30_MCLKCTL, mclk_ctl);

ditto.

> +	priv->asp_config_ctl &= ASP_CNFG_MASK;
> +	priv->asp_config_ctl |= (cs53l30_mclk_coeffs[mclk_coeff].asp_rate
> +				& ASP_RATE);
> +	regmap_write(priv->regmap, CS53L30_MCLKCTL, priv->asp_config_ctl);

Are you not overwriting the mclk_ctl stuff you just set here?
Don't know if that is intentional but if not maybe regmap_update_bits
again.

> +
> +	return 0;
> +}
> +
> +static int cs53l30_set_bias_level(struct snd_soc_codec *codec,
> +				enum snd_soc_bias_level level)
> +{
> +	struct snd_soc_dapm_context *dapm = snd_soc_codec_get_dapm(codec);
> +	struct cs53l30_private *priv = snd_soc_codec_get_drvdata(codec);
> +	unsigned int reg;
> +	int i, inter_max_check;
> +
> +	switch (level) {
> +	case SND_SOC_BIAS_ON:
> +		break;
> +	case SND_SOC_BIAS_PREPARE:
> +		if (dapm->bias_level == SND_SOC_BIAS_STANDBY)
> +			regmap_update_bits(priv->regmap, CS53L30_PWRCTL,
> +					   PDN_LP, 0);
> +		break;
> +	case SND_SOC_BIAS_STANDBY:
> +		if (dapm->bias_level == SND_SOC_BIAS_OFF) {
> +			regmap_update_bits(priv->regmap, CS53L30_MCLKCTL,
> +					   MCLK_DIS, 0);
> +			regmap_update_bits(priv->regmap, CS53L30_PWRCTL,
> +					   PDN_ULP, 0);
> +			msleep(50);
> +		} else {
> +			regmap_update_bits(priv->regmap, CS53L30_PWRCTL,
> +					   PDN_LP, PDN_LP);
> +		}
> +		break;
> +
> +	case SND_SOC_BIAS_OFF:
> +		regmap_update_bits(priv->regmap, CS53L30_INT_MASK,
> +				   PDN_DONE, 0);
> +		/* If digital softramp is set, the amount of time required
> +		 * for power down increases and depends on the digital
> +		 * volume setting.
> +		 */
> +
> +		/* Set the max possible time if digsft is set */
> +		regmap_read(priv->regmap, CS53L30_SFT_RAMP, &reg);
> +		if (reg & DIGSFT)
> +			inter_max_check = PDN_POLL_MAX;
> +		else
> +			inter_max_check = 10;
> +
> +		regmap_update_bits(priv->regmap, CS53L30_PWRCTL,
> +				   PDN_ULP, PDN_ULP);
> +		msleep(20); /* PDN_DONE will take a min of 20ms to be set.*/
> +		regmap_read(priv->regmap, CS53L30_IS, &reg); /* Clr status */
> +		for (i = 0; i < inter_max_check; i++) {
> +			usleep_range(1000, 1000);
> +			msleep(1);

This looks odd, guessing you probably only wanted the
usleep_range there. Also polling every millisecond for 900mS
seems a bit extreme, maybe back off a bit after the first 10
polls?

> +			regmap_read(priv->regmap, CS53L30_IS, &reg);
> +			if (reg & PDN_DONE)
> +				break;
> +		}
> +		/* PDN_DONE is set.  We now can disable the MCLK */
> +		regmap_update_bits(priv->regmap, CS53L30_INT_MASK,
> +				   PDN_DONE, PDN_DONE);
> +		regmap_update_bits(priv->regmap, CS53L30_MCLKCTL,
> +				   MCLK_DIS, MCLK_DIS);
> +		break;
> +	}
> +	dapm->bias_level = level;

Does the core not do this now? Not 100% sure but probably worth a
check.

Rest looks fine to me.

Thanks,
Charles


More information about the Alsa-devel mailing list