[alsa-devel] [RFC v2 5/6] ASoc: hdmi-codec: add IEC control.
Arnaud Pouliquen
arnaud.pouliquen at st.com
Fri Jan 22 18:48:31 CET 2016
Create 'IEC958 Playback Default' controls to support IEC61937 formats.
the use of the alsa control is optional, using 'iec_ctl' flag.
Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen at st.com>
---
include/sound/hdmi-codec.h | 1 +
sound/soc/codecs/hdmi-codec.c | 59 +++++++++++++++++++++++++++++++++----------
2 files changed, 46 insertions(+), 14 deletions(-)
diff --git a/include/sound/hdmi-codec.h b/include/sound/hdmi-codec.h
index ed780b2..58e8eae 100644
--- a/include/sound/hdmi-codec.h
+++ b/include/sound/hdmi-codec.h
@@ -96,6 +96,7 @@ struct hdmi_codec_pdata {
const struct hdmi_codec_ops *ops;
uint i2s:1;
uint spdif:1;
+ uint iec_ctl:1;
int max_i2s_channels;
};
diff --git a/sound/soc/codecs/hdmi-codec.c b/sound/soc/codecs/hdmi-codec.c
index 94349b3..1b6cb5a 100644
--- a/sound/soc/codecs/hdmi-codec.c
+++ b/sound/soc/codecs/hdmi-codec.c
@@ -32,6 +32,7 @@ struct hdmi_codec_priv {
struct snd_pcm_substream *current_stream;
struct snd_pcm_hw_constraint_list ratec;
uint8_t eld[MAX_ELD_BYTES];
+ struct snd_aes_iec958 iec;
};
static const struct snd_soc_dapm_widget hdmi_widgets[] = {
@@ -140,27 +141,30 @@ static int hdmi_codec_hw_params(struct snd_pcm_substream *substream,
struct snd_soc_dai *dai)
{
struct hdmi_codec_priv *hcp = snd_soc_dai_get_drvdata(dai);
- struct hdmi_codec_params hp = {
- .iec = {
- .status = { 0 },
- .subcode = { 0 },
- .pad = 0,
- .dig_subframe = { 0 },
- }
- };
+ struct hdmi_codec_params hp;
int ret;
dev_dbg(dai->dev, "%s() width %d rate %d channels %d\n", __func__,
params_width(params), params_rate(params),
params_channels(params));
- ret = snd_pcm_create_iec958_consumer_hw_params(params, hp.iec.status,
- sizeof(hp.iec.status));
- if (ret < 0) {
- dev_err(dai->dev, "Creating IEC958 channel status failed %d\n",
- ret);
- return ret;
+ mutex_lock(&hcp->current_stream_lock);
+ hp.iec = hcp->iec;
+
+ if (!hcp->hcd.iec_ctl) {
+ /*
+ * only PCM format supported
+ *channel status set according to runtime parameters
+ */
+ ret = snd_pcm_create_iec958_consumer_hw_params(params,
+ hp.iec.status, sizeof(hp.iec.status));
+ if (ret < 0) {
+ dev_err(dai->dev, "Creating IEC958 status failed %d\n",
+ ret);
+ return ret;
+ }
}
+ mutex_unlock(&hcp->current_stream_lock);
ret = hdmi_codec_new_stream(substream, dai);
if (ret)
@@ -266,12 +270,37 @@ static int hdmi_codec_digital_mute(struct snd_soc_dai *dai, int mute)
return 0;
}
+static int hdmi_codec_pcm_new(struct snd_soc_pcm_runtime *rtd,
+ struct snd_soc_dai *dai)
+{
+ struct hdmi_codec_priv *hcp = snd_soc_dai_get_drvdata(dai);
+ struct snd_pcm_iec958_params *iec958_params;
+
+ dev_dbg(dai->dev, "%s()\n", __func__);
+
+ if (!hcp->hcd.iec_ctl)
+ return 0;
+
+ iec958_params = devm_kzalloc(dai->dev, sizeof(*iec958_params),
+ GFP_KERNEL);
+ if (!iec958_params)
+ return -ENOMEM;
+
+ iec958_params->iec = &hcp->iec;
+ iec958_params->pdata = hcp;
+ iec958_params->mutex = &hcp->current_stream_lock;
+
+ return snd_pcm_create_iec958_ctl(rtd->pcm, iec958_params,
+ SNDRV_PCM_STREAM_PLAYBACK);
+}
+
static const struct snd_soc_dai_ops hdmi_dai_ops = {
.startup = hdmi_codec_startup,
.shutdown = hdmi_codec_shutdown,
.hw_params = hdmi_codec_hw_params,
.set_fmt = hdmi_codec_set_fmt,
.digital_mute = hdmi_codec_digital_mute,
+ .pcm_new = hdmi_codec_pcm_new,
};
@@ -352,6 +381,8 @@ static int hdmi_codec_probe(struct platform_device *pdev)
if (!hcp)
return -ENOMEM;
+ memset(&hcp->iec, 0, sizeof(hcp->iec));
+
hcp->hcd = *hcd;
mutex_init(&hcp->current_stream_lock);
--
1.9.1
More information about the Alsa-devel
mailing list