[alsa-devel] [PATCH 3/3] ASoC: fsl_ssi: remove register defaults

[Maciej S. Szmigiero]

On 17.01.2016 19:38, Timur Tabi wrote:
> Maciej S. Szmigiero wrote:
>> On 17.01.2016 15:16, Maciej S. Szmigiero wrote:
>>> On 17.01.2016 06:16, Timur Tabi wrote:
>>>> Maciej S. Szmigiero wrote:
>>>>> This is because (at least according to the datasheet) imx21-class SSI
>>>>> registers end at CCSR_SSI_SRMSK (no SACC{ST,EN,DIS} regs), so
>>>>> reading them for cache initialization may not be safe.
>>>>>
>>>>> Also, a "MXC 91221 only" comment before these regs in FSL tree
>>>>> (drivers/mxc/ssi/registers.h) seems to confirm that these registers
>>>>> aren't present at least on some SSI (or SoC) models.
>>>>
>>>> Can't we just mark them as precious or something, so that we don't have to have two structures?
>>>
>>> Looks like it can be done with just one static regmap config struct
>>> used then as template - I will post updated patch.

Patch updated according to Timur's suggestions (needs regmap fix):
diff --git a/sound/soc/fsl/fsl_ssi.c b/sound/soc/fsl/fsl_ssi.c
index 40dfd8a36484..ed8de1035cda 100644
--- a/sound/soc/fsl/fsl_ssi.c
+++ b/sound/soc/fsl/fsl_ssi.c
@@ -112,20 +112,6 @@ struct fsl_ssi_rxtx_reg_val {
 	struct fsl_ssi_reg_val tx;
 };
 
-static const struct reg_default fsl_ssi_reg_defaults[] = {
-	{CCSR_SSI_SCR,     0x00000000},
-	{CCSR_SSI_SIER,    0x00003003},
-	{CCSR_SSI_STCR,    0x00000200},
-	{CCSR_SSI_SRCR,    0x00000200},
-	{CCSR_SSI_STCCR,   0x00040000},
-	{CCSR_SSI_SRCCR,   0x00040000},
-	{CCSR_SSI_SACNT,   0x00000000},
-	{CCSR_SSI_STMSK,   0x00000000},
-	{CCSR_SSI_SRMSK,   0x00000000},
-	{CCSR_SSI_SACCEN,  0x00000000},
-	{CCSR_SSI_SACCDIS, 0x00000000},
-};
-
 static bool fsl_ssi_readable_reg(struct device *dev, unsigned int reg)
 {
 	switch (reg) {
@@ -190,8 +176,7 @@ static const struct regmap_config fsl_ssi_regconfig = {
 	.val_bits = 32,
 	.reg_stride = 4,
 	.val_format_endian = REGMAP_ENDIAN_NATIVE,
-	.reg_defaults = fsl_ssi_reg_defaults,
-	.num_reg_defaults = ARRAY_SIZE(fsl_ssi_reg_defaults),
+	.num_reg_defaults_raw = CCSR_SSI_SACCDIS / sizeof(uint32_t) + 1,
 	.readable_reg = fsl_ssi_readable_reg,
 	.volatile_reg = fsl_ssi_volatile_reg,
 	.precious_reg = fsl_ssi_precious_reg,
@@ -201,6 +186,7 @@ static const struct regmap_config fsl_ssi_regconfig = {
 
 struct fsl_ssi_soc_data {
 	bool imx;
+	bool imx21regs; /* imx21-class SSI - no SACC{ST,EN,DIS} regs */
 	bool offline_config;
 	u32 sisr_write_mask;
 };
@@ -303,6 +289,7 @@ static struct fsl_ssi_soc_data fsl_ssi_mpc8610 = {
 
 static struct fsl_ssi_soc_data fsl_ssi_imx21 = {
 	.imx = true,
+	.imx21regs = true,
 	.offline_config = true,
 	.sisr_write_mask = 0,
 };
@@ -586,8 +573,12 @@ static void fsl_ssi_setup_ac97(struct fsl_ssi_private *ssi_private)
 	 */
 	regmap_write(regs, CCSR_SSI_SACNT,
 			CCSR_SSI_SACNT_AC97EN | CCSR_SSI_SACNT_FV);
-	regmap_write(regs, CCSR_SSI_SACCDIS, 0xff);
-	regmap_write(regs, CCSR_SSI_SACCEN, 0x300);
+
+	/* no SACC{ST,EN,DIS} regs on imx21-class SSI */
+	if (!ssi_private->soc->imx21regs) {
+		regmap_write(regs, CCSR_SSI_SACCDIS, 0xff);
+		regmap_write(regs, CCSR_SSI_SACCEN, 0x300);
+	}
 
 	/*
 	 * Enable SSI, Transmit and Receive. AC97 has to communicate with the
@@ -1397,6 +1388,7 @@ static int fsl_ssi_probe(struct platform_device *pdev)
 	struct resource *res;
 	void __iomem *iomem;
 	char name[64];
+	struct regmap_config regconfig = fsl_ssi_regconfig;
 
 	of_id = of_match_device(fsl_ssi_ids, &pdev->dev);
 	if (!of_id || !of_id->data)
@@ -1444,15 +1436,25 @@ static int fsl_ssi_probe(struct platform_device *pdev)
 		return PTR_ERR(iomem);
 	ssi_private->ssi_phys = res->start;
 
+	if (ssi_private->soc->imx21regs) {
+		/*
+		 * According to datasheet imx21-class SSI
+		 * don't have SACC{ST,EN,DIS} regs.
+		 */
+		regconfig.max_register = CCSR_SSI_SRMSK;
+		regconfig.num_reg_defaults_raw =
+			CCSR_SSI_SRMSK / sizeof(uint32_t) + 1;
+	}
+
 	ret = of_property_match_string(np, "clock-names", "ipg");
 	if (ret < 0) {
 		ssi_private->has_ipg_clk_name = false;
 		ssi_private->regs = devm_regmap_init_mmio(&pdev->dev, iomem,
-			&fsl_ssi_regconfig);
+			&regconfig);
 	} else {
 		ssi_private->has_ipg_clk_name = true;
 		ssi_private->regs = devm_regmap_init_mmio_clk(&pdev->dev,
-			"ipg", iomem, &fsl_ssi_regconfig);
+			"ipg", iomem, &regconfig);
 	}
 	if (IS_ERR(ssi_private->regs)) {
 		dev_err(&pdev->dev, "Failed to init register map\n");


> However, I wonder if this patch is necessary at all.
> If the regs don't exist on an i.MX 21, does it really matter if we write to them?

At least i.MX6 datasheet SSI description has the following information:
"Transfer bus errors are generated upon response to the following:
* Write transfer to a read-only register.
* Read or write access to a register space beyond the last populated register of the SSI
in its memory map (up until the end of the allocated memory address range of the
SSI)."

Maciej Szmigiero