[alsa-devel] [PATCH 2/5] clk: bcm2835: enable management of PCM clock
Martin Sperl
kernel at martin.sperl.org
Sun Jan 10 19:01:30 CET 2016
> On 10.01.2016, at 14:02, Geert Uytterhoeven <geert at linux-m68k.org> wrote:
>
> I wrote:
> | Hence it can better be replaced (it seems to be unused in dts files, but you
> | can keep the definition to be 100% sure) by an ARRAY_SIZE() in the C driver.
> | This requires changing the driver to e.g. initialize clks[] in
> |bcm2835_clk_probe() based on a table instead of explicit code.
>
> If you fill in clks[] from a static table, you can take ARRAY_SIZE of
> the static table.
You mean something like the below?
(note: copy/paste from console issues - spaces instead of tabs)
diff --git a/drivers/clk/bcm/clk-bcm2835.c b/drivers/clk/bcm/clk-bcm2835.c
index dee67b3..5ce5e7f 100644
--- a/drivers/clk/bcm/clk-bcm2835.c
+++ b/drivers/clk/bcm/clk-bcm2835.c
@@ -294,7 +294,7 @@ struct bcm2835_cprman {
const char *osc_name;
struct clk_onecell_data onecell;
- struct clk *clks[BCM2835_CLOCK_COUNT];
+ struct clk *clks[];
};
static inline void cprman_write(struct bcm2835_cprman *cprman, u32 reg, u32 val
@@ -496,6 +496,14 @@ static const struct bcm2835_pll_data bcm2835_pllh_data = {
.max_fb_rate = BCM2835_MAX_FB_RATE,
};
+static const struct bcm2835_pll_data *bcm2835_plls[] = {
+ [BCM2835_PLLA] = &bcm2835_plla_data,
+ [BCM2835_PLLB] = &bcm2835_pllb_data,
+ [BCM2835_PLLC] = &bcm2835_pllc_data,
+ [BCM2835_PLLD] = &bcm2835_plld_data,
+ [BCM2835_PLLH] = &bcm2835_pllh_data,
+};
+
struct bcm2835_pll_divider_data {
const char *name;
const struct bcm2835_pll_data *source_pll;
@@ -625,6 +633,20 @@ static const struct bcm2835_pll_divider_data bcm2835_pllh_p
.fixed_divider = 10,
};
+static const struct bcm2835_pll_divider_data *bcm2835_pll_divs[] = {
+ [BCM2835_PLLA_CORE] = &bcm2835_plla_core_data,
+ [BCM2835_PLLA_PER] = &bcm2835_plla_per_data,
+ [BCM2835_PLLC_CORE0] = &bcm2835_pllc_core0_data,
+ [BCM2835_PLLC_CORE1] = &bcm2835_pllc_core1_data,
+ [BCM2835_PLLC_CORE2] = &bcm2835_pllc_core2_data,
+ [BCM2835_PLLC_PER] = &bcm2835_pllc_per_data,
+ [BCM2835_PLLD_CORE] = &bcm2835_plld_core_data,
+ [BCM2835_PLLD_PER] = &bcm2835_plld_per_data,
+ [BCM2835_PLLH_RCAL] = &bcm2835_pllh_rcal_data,
+ [BCM2835_PLLH_AUX] = &bcm2835_pllh_aux_data,
+ [BCM2835_PLLH_PIX] = &bcm2835_pllh_pix_data,
+};
+
struct bcm2835_clock_data {
const char *name;
@@ -837,6 +859,24 @@ static const struct bcm2835_clock_data bcm2835_clock_pcm_da
.mash = 1,
};
+static const struct bcm2835_clock_data *bcm2835_clks[] = {
+ [BCM2835_CLOCK_TIMER] = &bcm2835_clock_timer_data,
+ [BCM2835_CLOCK_OTP] = &bcm2835_clock_otp_data,
+ [BCM2835_CLOCK_TSENS] = &bcm2835_clock_tsens_data,
+ [BCM2835_CLOCK_VPU] = &bcm2835_clock_vpu_data,
+ [BCM2835_CLOCK_V3D] = &bcm2835_clock_v3d_data,
+ [BCM2835_CLOCK_ISP] = &bcm2835_clock_isp_data,
+ [BCM2835_CLOCK_H264] = &bcm2835_clock_h264_data,
+ [BCM2835_CLOCK_V3D] = &bcm2835_clock_v3d_data,
+ [BCM2835_CLOCK_SDRAM] = &bcm2835_clock_sdram_data,
+ [BCM2835_CLOCK_UART] = &bcm2835_clock_uart_data,
+ [BCM2835_CLOCK_VEC] = &bcm2835_clock_vec_data,
+ [BCM2835_CLOCK_HSM] = &bcm2835_clock_hsm_data,
+ [BCM2835_CLOCK_EMMC] = &bcm2835_clock_emmc_data,
+ [BCM2835_CLOCK_PWM] = &bcm2835_clock_pwm_data,
+ [BCM2835_CLOCK_PCM] = &bcm2835_clock_pcm_data,
+};
+
struct bcm2835_pll {
struct clk_hw hw;
struct bcm2835_cprman *cprman;
@@ -1560,8 +1600,13 @@ static int bcm2835_clk_probe(struct platform_device *pdev)
struct clk **clks;
struct bcm2835_cprman *cprman;
struct resource *res;
+ const int clks_cnt = max(ARRAY_SIZE(bcm2835_plls),
+ max(ARRAY_SIZE(bcm2835_pll_divs),
+ ARRAY_SIZE(bcm2835_clks))) + 1;
+ size_t alloc = sizeof(*cprman) + clks_cnt * sizeof(*clks);
+ size_t i;
- cprman = devm_kzalloc(dev, sizeof(*cprman), GFP_KERNEL);
+ cprman = devm_kzalloc(dev, alloc , GFP_KERNEL);
if (!cprman)
return -ENOMEM;
@@ -1578,67 +1623,43 @@ static int bcm2835_clk_probe(struct platform_device *pdev)
platform_set_drvdata(pdev, cprman);
- cprman->onecell.clk_num = BCM2835_CLOCK_COUNT;
+ cprman->onecell.clk_num = clks_cnt;
cprman->onecell.clks = cprman->clks;
clks = cprman->clks;
- clks[BCM2835_PLLA] = bcm2835_register_pll(cprman, &bcm2835_plla_data);
- clks[BCM2835_PLLB] = bcm2835_register_pll(cprman, &bcm2835_pllb_data);
- clks[BCM2835_PLLC] = bcm2835_register_pll(cprman, &bcm2835_pllc_data);
- clks[BCM2835_PLLD] = bcm2835_register_pll(cprman, &bcm2835_plld_data);
- clks[BCM2835_PLLH] = bcm2835_register_pll(cprman, &bcm2835_pllh_data);
-
- clks[BCM2835_PLLA_CORE] =
- bcm2835_register_pll_divider(cprman, &bcm2835_plla_core_data);
- clks[BCM2835_PLLA_PER] =
- bcm2835_register_pll_divider(cprman, &bcm2835_plla_per_data);
- clks[BCM2835_PLLC_CORE0] =
- bcm2835_register_pll_divider(cprman, &bcm2835_pllc_core0_data);
- clks[BCM2835_PLLC_CORE1] =
- bcm2835_register_pll_divider(cprman, &bcm2835_pllc_core1_data);
- clks[BCM2835_PLLC_CORE2] =
- bcm2835_register_pll_divider(cprman, &bcm2835_pllc_core2_data);
- clks[BCM2835_PLLC_PER] =
- bcm2835_register_pll_divider(cprman, &bcm2835_pllc_per_data);
- clks[BCM2835_PLLD_CORE] =
- bcm2835_register_pll_divider(cprman, &bcm2835_plld_core_data);
- clks[BCM2835_PLLD_PER] =
- bcm2835_register_pll_divider(cprman, &bcm2835_plld_per_data);
- clks[BCM2835_PLLH_RCAL] =
- bcm2835_register_pll_divider(cprman, &bcm2835_pllh_rcal_data);
- clks[BCM2835_PLLH_AUX] =
- bcm2835_register_pll_divider(cprman, &bcm2835_pllh_aux_data);
- clks[BCM2835_PLLH_PIX] =
- bcm2835_register_pll_divider(cprman, &bcm2835_pllh_pix_data);
-
- clks[BCM2835_CLOCK_TIMER] =
- bcm2835_register_clock(cprman, &bcm2835_clock_timer_data);
- clks[BCM2835_CLOCK_OTP] =
- bcm2835_register_clock(cprman, &bcm2835_clock_otp_data);
- clks[BCM2835_CLOCK_TSENS] =
- bcm2835_register_clock(cprman, &bcm2835_clock_tsens_data);
- clks[BCM2835_CLOCK_VPU] =
- bcm2835_register_clock(cprman, &bcm2835_clock_vpu_data);
- clks[BCM2835_CLOCK_V3D] =
- bcm2835_register_clock(cprman, &bcm2835_clock_v3d_data);
- clks[BCM2835_CLOCK_ISP] =
- bcm2835_register_clock(cprman, &bcm2835_clock_isp_data);
- clks[BCM2835_CLOCK_H264] =
- bcm2835_register_clock(cprman, &bcm2835_clock_h264_data);
- clks[BCM2835_CLOCK_V3D] =
- bcm2835_register_clock(cprman, &bcm2835_clock_v3d_data);
- clks[BCM2835_CLOCK_SDRAM] =
- bcm2835_register_clock(cprman, &bcm2835_clock_sdram_data);
- clks[BCM2835_CLOCK_UART] =
- bcm2835_register_clock(cprman, &bcm2835_clock_uart_data);
- clks[BCM2835_CLOCK_VEC] =
- bcm2835_register_clock(cprman, &bcm2835_clock_vec_data);
- clks[BCM2835_CLOCK_HSM] =
- bcm2835_register_clock(cprman, &bcm2835_clock_hsm_data);
- clks[BCM2835_CLOCK_EMMC] =
- bcm2835_register_clock(cprman, &bcm2835_clock_emmc_data);
- clks[BCM2835_CLOCK_PCM] =
- bcm2835_register_clock(cprman, &bcm2835_clock_pcm_data);
+ /* register pll */
+ for(i = 0; i< ARRAY_SIZE(bcm2835_plls); i++) {
+ if (!bcm2835_plls[i])
+ continue;
+ clks[i] = bcm2835_register_pll( cprman, bcm2835_plls[i]);
+ }
+
+ /* register pll divider */
+ for(i = 0; i< ARRAY_SIZE(bcm2835_pll_divs); i++) {
+ if (!bcm2835_pll_divs[i])
+ continue;
+ if (clks[i]) {
+ dev_err(dev,
+ "Could not register pll_div_id %i - is already defined as: %pC\n",
+ i, clks[i]);
+ continue;
+ }
+ clks[i] = bcm2835_register_pll_divider(cprman,
+ bcm2835_pll_divs[i]);
+ }
+
+ /* register clocks */
+ for(i = 0; i< ARRAY_SIZE(bcm2835_clks); i++) {
+ if (!bcm2835_clks[i])
+ continue;
+ if (clks[i]) {
+ dev_err(dev,
+ "Could not register clock_id %i - is already defined as: %pC\n",
+ i, clks[i]);
+ continue;
+ }
+ clks[i] = bcm2835_register_clock(cprman, bcm2835_clks[i]);
+ }
/*
* CM_PERIICTL (and CM_PERIACTL, CM_SYSCTL and CM_VPUCTL if
@@ -1652,8 +1673,6 @@ static int bcm2835_clk_probe(struct platform_device *pdev)
cprman->regs + CM_PERIICTL, CM_GATE_BIT,
0, &cprman->regs_lock);
- clks[BCM2835_CLOCK_PWM] =
- bcm2835_register_clock(cprman, &bcm2835_clock_pwm_data);
return of_clk_add_provider(dev->of_node, of_clk_src_onecell_get,
&cprman->onecell);
If so, then I will send it as a patch plus the PCM patch after I have
finished testing the patch.
This patch-set would also include the complete list of clocks still
missing from dt-bindings.h as well as the patch that adds all the
clock registers, which I had sent earlier.
More information about the Alsa-devel
mailing list