[alsa-devel] [PATCH 3/4] ALSA: hda - hdmi jack created based on pcm

[Yang, Libin]

> -----Original Message-----
> From: Takashi Iwai [mailto:tiwai at suse.de]
> Sent: Friday, January 08, 2016 3:55 PM
> To: Yang, Libin
> Cc: libin.yang at linux.intel.com; alsa-devel at alsa-project.org; Lin,
> Mengdong
> Subject: Re: [alsa-devel] [PATCH 3/4] ALSA: hda - hdmi jack created based
> on pcm
> 
> On Fri, 08 Jan 2016 08:52:17 +0100,
> Yang, Libin wrote:
> >
> >
> > > -----Original Message-----
> > > From: Takashi Iwai [mailto:tiwai at suse.de]
> > > Sent: Friday, January 08, 2016 3:44 PM
> > > To: Yang, Libin
> > > Cc: libin.yang at linux.intel.com; alsa-devel at alsa-project.org; Lin,
> > > Mengdong
> > > Subject: Re: [alsa-devel] [PATCH 3/4] ALSA: hda - hdmi jack created
> based
> > > on pcm
> > >
> > > On Fri, 08 Jan 2016 04:15:03 +0100,
> > > Yang, Libin wrote:
> > > > > > @@ -2626,18 +2659,23 @@ static void hdmi_array_free(struct
> > > > > hdmi_spec *spec)
> > > > > >  static void generic_hdmi_free(struct hda_codec *codec)
> > > > > >  {
> > > > > >  	struct hdmi_spec *spec = codec->spec;
> > > > > > -	int pin_idx;
> > > > > > +	int pin_idx, pcm_idx;
> > > > > >
> > > > > >  	if (codec_has_acomp(codec))
> > > > > >  		snd_hdac_i915_register_notifier(NULL);
> > > > > >
> > > > > >  	for (pin_idx = 0; pin_idx < spec->num_pins; pin_idx++) {
> > > > > >  		struct hdmi_spec_per_pin *per_pin =
> get_pin(spec,
> > > > > pin_idx);
> > > > > > -
> > > > > >  		cancel_delayed_work_sync(&per_pin->work);
> > > > > >  		eld_proc_free(per_pin);
> > > > > > -		if (per_pin->acomp_jack)
> > > > > > -			snd_device_free(codec->card, per_pin-
> > > > > >acomp_jack);
> > > > > > +	}
> > > > > > +
> > > > > > +	for (pcm_idx = 0; pcm_idx < spec->pcm_used;
> pcm_idx++) {
> > > > > > +		if (spec->dyn_pcm_assign)
> > > > > > +			snd_device_free(codec->card,
> > > > > > +					spec-
> >pcm_rec[pcm_idx].jack);
> > > > > > +		else
> > > > > > +			spec->pcm_rec[pcm_idx].jack = NULL;
> > > > >
> > > > > Check whether spec->pcm_rec[pcm_idx].jack is NULL beforehand.
> > > > >
> > > >
> > > > Do you mean:
> > > > if (spec->pcm_rec[pcm_idx].jack)
> > > >     spec->pcm_rec[pcm_idx].jack = NULL;
> > >
> > > Not only that.  Calling snd_device_free() with NULL isn't allowed.
> >
> > I see. It will be:
> > +for (pcm_idx = 0; pcm_idx < spec->pcm_used; pcm_idx++) {
> > +		if (spec->pcm_rec[pcm_idx].jack == NULL)
> > +			continue;
> > +		if (spec->dyn_pcm_assign)
> >
> > BTW: It seems snd_device_free() will check the pointer.
> 
> Yes but with snd_BUG_ON(), i.e. with a warning.  It shouldn't be
> called with NULL.

Get it :-)

Regards,
Libin

> 
> 
> Takashi