[alsa-devel] Applied "ASoC: Intel: Skylake: Add i915 enabling in skl probe" to the asoc tree

[Mark Brown]

The patch

   ASoC: Intel: Skylake: Add i915 enabling in skl probe

has been applied to the asoc tree at

   git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git 

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.  

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark

>From 6980c057ea1bca145e8fef39ddf541254f7c8747 Mon Sep 17 00:00:00 2001
From: Vinod Koul <vinod.koul at intel.com>
Date: Wed, 17 Feb 2016 21:34:06 +0530
Subject: [PATCH] ASoC: Intel: Skylake: Add i915 enabling in skl probe

The SKL also supports HDMI output so in probe we need to enable
the HDMI using common i915 APIs to ensure it gets probed on the
bus

After S3 during the controller resequencing the codec domain need
to be kept ON for successful reconfiguration of Codec. Once
configured it will be turned OFF in codec driver.

Signed-off-by: Vinod Koul <vinod.koul at intel.com>
Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty at intel.com>
Signed-off-by: Mark Brown <broonie at kernel.org>
---
 sound/soc/intel/Kconfig       |  1 +
 sound/soc/intel/skylake/skl.c | 51 +++++++++++++++++++++++++++++++++++++++++++
 2 files changed, 52 insertions(+)

diff --git a/sound/soc/intel/Kconfig b/sound/soc/intel/Kconfig
index 803f95e..6e65085 100644
--- a/sound/soc/intel/Kconfig
+++ b/sound/soc/intel/Kconfig
@@ -154,6 +154,7 @@ config SND_SOC_INTEL_SKYLAKE
 	tristate
 	select SND_HDA_EXT_CORE
 	select SND_SOC_TOPOLOGY
+	select SND_HDA_I915
 	select SND_SOC_INTEL_SST
 
 config SND_SOC_INTEL_SKL_RT286_MACH
diff --git a/sound/soc/intel/skylake/skl.c b/sound/soc/intel/skylake/skl.c
index f89abb1..0d38bdb 100644
--- a/sound/soc/intel/skylake/skl.c
+++ b/sound/soc/intel/skylake/skl.c
@@ -28,6 +28,9 @@
 #include <linux/firmware.h>
 #include <sound/pcm.h>
 #include "../common/sst-acpi.h"
+#include <sound/hda_register.h>
+#include <sound/hdaudio.h>
+#include <sound/hda_i915.h>
 #include "skl.h"
 #include "skl-sst-dsp.h"
 #include "skl-sst-ipc.h"
@@ -243,6 +246,16 @@ static int skl_resume(struct device *dev)
 	struct hdac_bus *bus = ebus_to_hbus(ebus);
 	int ret;
 
+	/* Turned OFF in HDMI codec driver after codec reconfiguration */
+	if (IS_ENABLED(CONFIG_SND_SOC_HDAC_HDMI)) {
+		ret = snd_hdac_display_power(bus, true);
+		if (ret < 0) {
+			dev_err(bus->dev,
+				"Cannot turn on display power on i915\n");
+			return ret;
+		}
+	}
+
 	/*
 	 * resume only when we are not in suspend active, otherwise need to
 	 * restore the device
@@ -481,6 +494,27 @@ static int skl_create(struct pci_dev *pci,
 	return 0;
 }
 
+static int skl_i915_init(struct hdac_bus *bus)
+{
+	int err;
+
+	/*
+	 * The HDMI codec is in GPU so we need to ensure that it is powered
+	 * up and ready for probe
+	 */
+	err = snd_hdac_i915_init(bus);
+	if (err < 0)
+		return err;
+
+	err = snd_hdac_display_power(bus, true);
+	if (err < 0) {
+		dev_err(bus->dev, "Cannot turn on display power on i915\n");
+		return err;
+	}
+
+	return err;
+}
+
 static int skl_first_init(struct hdac_ext_bus *ebus)
 {
 	struct skl *skl = ebus_to_skl(ebus);
@@ -543,6 +577,12 @@ static int skl_first_init(struct hdac_ext_bus *ebus)
 	/* initialize chip */
 	skl_init_pci(skl);
 
+	if (IS_ENABLED(CONFIG_SND_SOC_HDAC_HDMI)) {
+		err = skl_i915_init(bus);
+		if (err < 0)
+			return err;
+	}
+
 	skl_init_chip(bus, true);
 
 	/* codec detection */
@@ -617,6 +657,14 @@ static int skl_probe(struct pci_dev *pci,
 	if (err < 0)
 		goto out_unregister;
 
+	if (IS_ENABLED(CONFIG_SND_SOC_HDAC_HDMI)) {
+		err = snd_hdac_display_power(bus, false);
+		if (err < 0) {
+			dev_err(bus->dev, "Cannot turn off display power on i915\n");
+			return err;
+		}
+	}
+
 	/*configure PM */
 	pm_runtime_put_noidle(bus->dev);
 	pm_runtime_allow(bus->dev);
@@ -671,6 +719,9 @@ static void skl_remove(struct pci_dev *pci)
 	if (skl->tplg)
 		release_firmware(skl->tplg);
 
+	if (IS_ENABLED(CONFIG_SND_SOC_HDAC_HDMI))
+		snd_hdac_i915_exit(&ebus->bus);
+
 	if (pci_dev_run_wake(pci))
 		pm_runtime_get_noresume(&pci->dev);
 	pci_dev_put(pci);
-- 
2.7.0