[alsa-devel] [RFC v4 5/8] drm/mediatek: hdmi: issue notifications
Philipp Zabel
p.zabel at pengutronix.de
Thu Feb 18 16:02:18 CET 2016
Issue hot-plug detection, EDID update, and ELD update notifications
from the CEC and HDMI drivers.
Signed-off-by: Philipp Zabel <p.zabel at pengutronix.de>
---
drivers/gpu/drm/mediatek/mtk_cec.c | 11 +++++++++++
drivers/gpu/drm/mediatek/mtk_drm_hdmi_drv.c | 3 +++
2 files changed, 14 insertions(+)
diff --git a/drivers/gpu/drm/mediatek/mtk_cec.c b/drivers/gpu/drm/mediatek/mtk_cec.c
index cba3647..c309920 100644
--- a/drivers/gpu/drm/mediatek/mtk_cec.c
+++ b/drivers/gpu/drm/mediatek/mtk_cec.c
@@ -13,6 +13,7 @@
*/
#include <linux/clk.h>
#include <linux/delay.h>
+#include <linux/hdmi-not.h>
#include <linux/io.h>
#include <linux/interrupt.h>
#include <linux/platform_device.h>
@@ -79,6 +80,12 @@ void mtk_cec_set_hpd_event(struct device *dev,
cec->hdmi_dev = hdmi_dev;
cec->hpd_event = hpd_event;
+
+ /* Initial notification event to set jack state */
+ if (mtk_cec_hpd_high(dev))
+ hdmi_event_connect(hdmi_dev);
+ else
+ hdmi_event_disconnect(hdmi_dev);
}
bool mtk_cec_hpd_high(struct device *dev)
@@ -160,6 +167,10 @@ static irqreturn_t mtk_cec_htplg_isr_thread(int irq, void *arg)
if (cec->hpd != hpd) {
dev_info(dev, "hotplug event!,cur hpd = %d, hpd = %d\n",
cec->hpd, hpd);
+ if (hpd)
+ hdmi_event_connect(cec->hdmi_dev);
+ else
+ hdmi_event_disconnect(cec->hdmi_dev);
cec->hpd = hpd;
if (cec->hpd_event)
cec->hpd_event(hpd, cec->hdmi_dev);
diff --git a/drivers/gpu/drm/mediatek/mtk_drm_hdmi_drv.c b/drivers/gpu/drm/mediatek/mtk_drm_hdmi_drv.c
index 96ad53a..e7562fb 100644
--- a/drivers/gpu/drm/mediatek/mtk_drm_hdmi_drv.c
+++ b/drivers/gpu/drm/mediatek/mtk_drm_hdmi_drv.c
@@ -17,6 +17,7 @@
#include <drm/drm_crtc_helper.h>
#include <drm/drm_edid.h>
#include <linux/clk.h>
+#include <linux/hdmi-not.h>
#include <linux/i2c.h>
#include <linux/kernel.h>
#include <linux/mfd/syscon.h>
@@ -122,9 +123,11 @@ static int mtk_hdmi_conn_get_modes(struct drm_connector *conn)
hdmi->dvi_mode = !drm_detect_monitor_audio(edid);
drm_mode_connector_update_edid_property(conn, edid);
+ hdmi_event_new_edid(hdmi->dev, edid, sizeof(*edid));
ret = drm_add_edid_modes(conn, edid);
drm_edid_to_eld(conn, edid);
+ hdmi_event_new_eld(hdmi->dev, conn->eld);
kfree(edid);
return ret;
}
--
2.7.0
More information about the Alsa-devel
mailing list