[alsa-devel] [PATCH v6 15/15] ASoC: hdac_hdmi: Fix to wait for D3 before powering off codec

[Subhransu S. Prusty]

Powering off codec immediately after sending D3 verb may not set
the node to D3 state. So wait for a confirmation response before
shutting down codec.

Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty at intel.com>
Signed-off-by: Vinod Koul <vinod.koul at intel.com>
---
 sound/soc/codecs/hdac_hdmi.c | 12 +++++++++++-
 1 file changed, 11 insertions(+), 1 deletion(-)

diff --git a/sound/soc/codecs/hdac_hdmi.c b/sound/soc/codecs/hdac_hdmi.c
index 0baf504..a4cf0b9 100644
--- a/sound/soc/codecs/hdac_hdmi.c
+++ b/sound/soc/codecs/hdac_hdmi.c
@@ -1551,6 +1551,7 @@ static int hdac_hdmi_runtime_suspend(struct device *dev)
 	struct hdac_ext_device *edev = to_hda_ext_device(dev);
 	struct hdac_device *hdac = &edev->hdac;
 	struct hdac_bus *bus = hdac->bus;
+	unsigned long timeout;
 	int err;
 
 	dev_dbg(dev, "Enter: %s\n", __func__);
@@ -1560,10 +1561,19 @@ static int hdac_hdmi_runtime_suspend(struct device *dev)
 		return 0;
 
 	/* Power down afg */
-	if (!snd_hdac_check_power_state(hdac, hdac->afg, AC_PWRST_D3))
+	if (!snd_hdac_check_power_state(hdac, hdac->afg, AC_PWRST_D3)) {
 		snd_hdac_codec_write(hdac, hdac->afg, 0,
 			AC_VERB_SET_POWER_STATE, AC_PWRST_D3);
 
+		/* Wait till power state is set to D3 */
+		timeout = jiffies + msecs_to_jiffies(1000);
+		while(!snd_hdac_check_power_state(hdac, hdac->afg, AC_PWRST_D3)
+				&& time_before(jiffies, timeout)) {
+
+			msleep(50);
+		}
+	}
+
 	err = snd_hdac_display_power(bus, false);
 	if (err < 0) {
 		dev_err(bus->dev, "Cannot turn on display power on i915\n");
-- 
1.9.1