[alsa-devel] [PATCH 00/12] ASoC: Intel: Skylake: Driver updates

[jeeja.kp at intel.com]

From: Jeeja KP <jeeja.kp at intel.com>

This patch series includes driver updates for the handling scenarios 
during System S0/S3 transitions when audio stream is stopped during
system.
o move DMA configuration in DSP Gateway Module widget event handler to
ensure DMA is configured after resume. 
o Enable SSP MLCK using Supply widget. This will ensure the MCLK is
enabled when the widget is power on.
o Check DMA decouple register state before coupling/decoupling the DMA.
o In case of HDMI pass-through pipe, reset only the FE Pipe when stream
in in XRUN state.
o Resume the stream from HW renderer position.
o HDMI Codec pin and converter state need to be restored when stream
is resumed.

Jeeja KP (12):
  ASoC: Intel: Skylake: Add helper function to setup host/link dma
  ASoC: Intel: Skylake: Configure DMA in PRE_PMD handler of Mixer
  ASoC: Intel: Skylake: Removed unused skl_get_format()
  ALSA: hda: check stream decoupled register state
  ASoC: Intel: Skylake: Add set_tristate DAI ops to enable SSP MCLK
  ASoC: Intel: Skylake: Remove unused SSP BE prepare DAI ops
  ASoC: Intel: Skylake: Add supply widget as non DSP widget
  ASoC: Intel: Skylake: Add supply widget in skl_nau_max machine
  ASoC: Intel: Skylake: Add supply widget in bxt_da_max machine
  ASoC: Intel: Skylake: Don't reset pass-through pipe in BE prepare
  ASoC: Intel: Skylake: set the resume point to LPIB
  ASoC: hdac_hdmi: Enable pin and converter in prepare

 sound/hda/ext/hdac_ext_stream.c                 |  15 +-
 sound/soc/codecs/hdac_hdmi.c                    |  28 ++--
 sound/soc/intel/boards/bxt_da7219_max98357a.c   |  34 ++++
 sound/soc/intel/boards/skl_nau88l25_max98357a.c |  34 ++++
 sound/soc/intel/skylake/skl-pcm.c               | 210 +++++++++++++-----------
 sound/soc/intel/skylake/skl-topology.c          |  27 ++-
 sound/soc/intel/skylake/skl-topology.h          |   6 +
 7 files changed, 240 insertions(+), 114 deletions(-)

-- 
2.5.0