[alsa-devel] Applied "ASoC: Intel: bytcr_rt5640: add MCLK support" to the asoc tree
Mark Brown
broonie at kernel.org
Mon Aug 15 16:15:42 CEST 2016
The patch
ASoC: Intel: bytcr_rt5640: add MCLK support
has been applied to the asoc tree at
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git
All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying
to this mail.
Thanks,
Mark
>From df1a2776a795848f4dbc7c0cb396158b43eb8aa3 Mon Sep 17 00:00:00 2001
From: Irina Tirdea <irina.tirdea at intel.com>
Date: Fri, 12 Aug 2016 16:27:57 -0500
Subject: [PATCH] ASoC: Intel: bytcr_rt5640: add MCLK support
Use platform clocks "pmc_plt_clk_3" when MCLK quirk is defined.
By default always enable the 19.2 MHz PLL.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart at linux.intel.com>
Signed-off-by: Irina Tirdea <irina.tirdea at intel.com>
Signed-off-by: Mark Brown <broonie at kernel.org>
---
sound/soc/intel/boards/bytcr_rt5640.c | 187 +++++++++++++++++++++++++++++++---
1 file changed, 172 insertions(+), 15 deletions(-)
diff --git a/sound/soc/intel/boards/bytcr_rt5640.c b/sound/soc/intel/boards/bytcr_rt5640.c
index 9b9d380d1cbb..11e11c6caa89 100644
--- a/sound/soc/intel/boards/bytcr_rt5640.c
+++ b/sound/soc/intel/boards/bytcr_rt5640.c
@@ -26,6 +26,7 @@
#include <linux/slab.h>
#include <asm/cpu_device_id.h>
#include <asm/platform_sst_audio.h>
+#include <linux/clk.h>
#include <sound/pcm.h>
#include <sound/pcm_params.h>
#include <sound/soc.h>
@@ -49,18 +50,104 @@ enum {
#define BYT_RT5640_SSP2_AIF2 BIT(19) /* default is using AIF1 */
#define BYT_RT5640_SSP0_AIF1 BIT(20)
#define BYT_RT5640_SSP0_AIF2 BIT(21)
+#define BYT_RT5640_MCLK_EN BIT(22)
+#define BYT_RT5640_MCLK_25MHZ BIT(23)
+
+struct byt_rt5640_private {
+ struct clk *mclk;
+};
static unsigned long byt_rt5640_quirk = BYT_RT5640_DMIC1_MAP |
- BYT_RT5640_DMIC_EN;
+ BYT_RT5640_DMIC_EN |
+ BYT_RT5640_MCLK_EN;
+
+#define BYT_CODEC_DAI1 "rt5640-aif1"
+#define BYT_CODEC_DAI2 "rt5640-aif2"
+
+static inline struct snd_soc_dai *byt_get_codec_dai(struct snd_soc_card *card)
+{
+ struct snd_soc_pcm_runtime *rtd;
+
+ list_for_each_entry(rtd, &card->rtd_list, list) {
+ if (!strncmp(rtd->codec_dai->name, BYT_CODEC_DAI1,
+ strlen(BYT_CODEC_DAI1)))
+ return rtd->codec_dai;
+ if (!strncmp(rtd->codec_dai->name, BYT_CODEC_DAI2,
+ strlen(BYT_CODEC_DAI2)))
+ return rtd->codec_dai;
+
+ }
+ return NULL;
+}
+
+static int platform_clock_control(struct snd_soc_dapm_widget *w,
+ struct snd_kcontrol *k, int event)
+{
+ struct snd_soc_dapm_context *dapm = w->dapm;
+ struct snd_soc_card *card = dapm->card;
+ struct snd_soc_dai *codec_dai;
+ struct byt_rt5640_private *priv = snd_soc_card_get_drvdata(card);
+ int ret;
+
+ codec_dai = byt_get_codec_dai(card);
+ if (!codec_dai) {
+ dev_err(card->dev,
+ "Codec dai not found; Unable to set platform clock\n");
+ return -EIO;
+ }
+
+ if (SND_SOC_DAPM_EVENT_ON(event)) {
+ if ((byt_rt5640_quirk & BYT_RT5640_MCLK_EN) && priv->mclk) {
+ ret = clk_prepare_enable(priv->mclk);
+ if (ret < 0) {
+ dev_err(card->dev,
+ "could not configure MCLK state");
+ return ret;
+ }
+ }
+ ret = snd_soc_dai_set_sysclk(codec_dai, RT5640_SCLK_S_PLL1,
+ 48000 * 512,
+ SND_SOC_CLOCK_IN);
+ } else {
+ /*
+ * Set codec clock source to internal clock before
+ * turning off the platform clock. Codec needs clock
+ * for Jack detection and button press
+ */
+ ret = snd_soc_dai_set_sysclk(codec_dai, RT5640_SCLK_S_RCCLK,
+ 0,
+ SND_SOC_CLOCK_IN);
+ if (!ret) {
+ if ((byt_rt5640_quirk & BYT_RT5640_MCLK_EN) && priv->mclk)
+ clk_disable_unprepare(priv->mclk);
+ }
+ }
+
+ if (ret < 0) {
+ dev_err(card->dev, "can't set codec sysclk: %d\n", ret);
+ return ret;
+ }
+
+ return 0;
+}
static const struct snd_soc_dapm_widget byt_rt5640_widgets[] = {
SND_SOC_DAPM_HP("Headphone", NULL),
SND_SOC_DAPM_MIC("Headset Mic", NULL),
SND_SOC_DAPM_MIC("Internal Mic", NULL),
SND_SOC_DAPM_SPK("Speaker", NULL),
+ SND_SOC_DAPM_SUPPLY("Platform Clock", SND_SOC_NOPM, 0, 0,
+ platform_clock_control, SND_SOC_DAPM_PRE_PMU |
+ SND_SOC_DAPM_POST_PMD),
+
};
static const struct snd_soc_dapm_route byt_rt5640_audio_map[] = {
+ {"Headphone", NULL, "Platform Clock"},
+ {"Headset Mic", NULL, "Platform Clock"},
+ {"Internal Mic", NULL, "Platform Clock"},
+ {"Speaker", NULL, "Platform Clock"},
+
{"Headset Mic", NULL, "MICBIAS1"},
{"IN2P", NULL, "Headset Mic"},
{"Headphone", NULL, "HPOL"},
@@ -150,21 +237,41 @@ static int byt_rt5640_aif1_hw_params(struct snd_pcm_substream *substream,
ret = snd_soc_dai_set_sysclk(codec_dai, RT5640_SCLK_S_PLL1,
params_rate(params) * 512,
SND_SOC_CLOCK_IN);
+
if (ret < 0) {
dev_err(rtd->dev, "can't set codec clock %d\n", ret);
return ret;
}
- if ((byt_rt5640_quirk & BYT_RT5640_SSP0_AIF1) ||
- (byt_rt5640_quirk & BYT_RT5640_SSP0_AIF2)) {
-
- ret = snd_soc_dai_set_pll(codec_dai, 0, RT5640_PLL1_S_BCLK1,
- params_rate(params) * 32, /* FIXME */
- params_rate(params) * 512);
+ if (!(byt_rt5640_quirk & BYT_RT5640_MCLK_EN)) {
+ /* use bitclock as PLL input */
+ if ((byt_rt5640_quirk & BYT_RT5640_SSP0_AIF1) ||
+ (byt_rt5640_quirk & BYT_RT5640_SSP0_AIF2)) {
+
+ /* 2x16 bit slots on SSP0 */
+ ret = snd_soc_dai_set_pll(codec_dai, 0,
+ RT5640_PLL1_S_BCLK1,
+ params_rate(params) * 32,
+ params_rate(params) * 512);
+ } else {
+ /* 2x15 bit slots on SSP2 */
+ ret = snd_soc_dai_set_pll(codec_dai, 0,
+ RT5640_PLL1_S_BCLK1,
+ params_rate(params) * 50,
+ params_rate(params) * 512);
+ }
} else {
- ret = snd_soc_dai_set_pll(codec_dai, 0, RT5640_PLL1_S_BCLK1,
- params_rate(params) * 50,
- params_rate(params) * 512);
+ if (byt_rt5640_quirk & BYT_RT5640_MCLK_25MHZ) {
+ ret = snd_soc_dai_set_pll(codec_dai, 0,
+ RT5640_PLL1_S_MCLK,
+ 25000000,
+ params_rate(params) * 512);
+ } else {
+ ret = snd_soc_dai_set_pll(codec_dai, 0,
+ RT5640_PLL1_S_MCLK,
+ 19200000,
+ params_rate(params) * 512);
+ }
}
if (ret < 0) {
@@ -188,7 +295,8 @@ static const struct dmi_system_id byt_rt5640_quirk_table[] = {
DMI_EXACT_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "T100TA"),
},
- .driver_data = (unsigned long *)BYT_RT5640_IN1_MAP,
+ .driver_data = (unsigned long *)(BYT_RT5640_IN1_MAP |
+ BYT_RT5640_MCLK_EN),
},
{
.callback = byt_rt5640_quirk_cb,
@@ -199,7 +307,8 @@ static const struct dmi_system_id byt_rt5640_quirk_table[] = {
.driver_data = (unsigned long *)(BYT_RT5640_IN1_MAP |
BYT_RT5640_MONO_SPEAKER |
BYT_RT5640_DIFF_MIC |
- BYT_RT5640_SSP0_AIF2
+ BYT_RT5640_SSP0_AIF2 |
+ BYT_RT5640_MCLK_EN
),
},
{
@@ -209,7 +318,8 @@ static const struct dmi_system_id byt_rt5640_quirk_table[] = {
DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "Venue 8 Pro 5830"),
},
.driver_data = (unsigned long *)(BYT_RT5640_DMIC2_MAP |
- BYT_RT5640_DMIC_EN),
+ BYT_RT5640_DMIC_EN |
+ BYT_RT5640_MCLK_EN),
},
{
.callback = byt_rt5640_quirk_cb,
@@ -217,7 +327,8 @@ static const struct dmi_system_id byt_rt5640_quirk_table[] = {
DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "HP ElitePad 1000 G2"),
},
- .driver_data = (unsigned long *)BYT_RT5640_IN1_MAP,
+ .driver_data = (unsigned long *)(BYT_RT5640_IN1_MAP |
+ BYT_RT5640_MCLK_EN),
},
{}
};
@@ -228,13 +339,18 @@ static int byt_rt5640_init(struct snd_soc_pcm_runtime *runtime)
struct snd_soc_codec *codec = runtime->codec;
struct snd_soc_card *card = runtime->card;
const struct snd_soc_dapm_route *custom_map;
+ struct byt_rt5640_private *priv = snd_soc_card_get_drvdata(card);
int num_routes;
card->dapm.idle_bias_off = true;
rt5640_sel_asrc_clk_src(codec,
RT5640_DA_STEREO_FILTER |
- RT5640_AD_STEREO_FILTER,
+ RT5640_DA_MONO_L_FILTER |
+ RT5640_DA_MONO_R_FILTER |
+ RT5640_AD_STEREO_FILTER |
+ RT5640_AD_MONO_L_FILTER |
+ RT5640_AD_MONO_R_FILTER,
RT5640_CLK_SEL_ASRC);
ret = snd_soc_add_card_controls(card, byt_rt5640_controls,
@@ -312,6 +428,30 @@ static int byt_rt5640_init(struct snd_soc_pcm_runtime *runtime)
snd_soc_dapm_ignore_suspend(&card->dapm, "Headphone");
snd_soc_dapm_ignore_suspend(&card->dapm, "Speaker");
+ if ((byt_rt5640_quirk & BYT_RT5640_MCLK_EN) && priv->mclk) {
+ /*
+ * The firmware might enable the clock at
+ * boot (this information may or may not
+ * be reflected in the enable clock register).
+ * To change the rate we must disable the clock
+ * first to cover these cases. Due to common
+ * clock framework restrictions that do not allow
+ * to disable a clock that has not been enabled,
+ * we need to enable the clock first.
+ */
+ ret = clk_prepare_enable(priv->mclk);
+ if (!ret)
+ clk_disable_unprepare(priv->mclk);
+
+ if (byt_rt5640_quirk & BYT_RT5640_MCLK_25MHZ)
+ ret = clk_set_rate(priv->mclk, 25000000);
+ else
+ ret = clk_set_rate(priv->mclk, 19200000);
+
+ if (ret)
+ dev_err(card->dev, "unable to set MCLK rate\n");
+ }
+
return ret;
}
@@ -490,6 +630,7 @@ static bool is_valleyview(void)
return true;
}
+
static int snd_byt_rt5640_mc_probe(struct platform_device *pdev)
{
int ret_val = 0;
@@ -497,10 +638,16 @@ static int snd_byt_rt5640_mc_probe(struct platform_device *pdev)
const char *i2c_name = NULL;
int i;
int dai_index;
+ struct byt_rt5640_private *priv;
+
+ priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_ATOMIC);
+ if (!priv)
+ return -ENOMEM;
/* register the soc card */
byt_rt5640_card.dev = &pdev->dev;
mach = byt_rt5640_card.dev->platform_data;
+ snd_soc_card_set_drvdata(&byt_rt5640_card, priv);
/* fix index of codec dai */
dai_index = MERR_DPCM_COMPR + 1;
@@ -561,6 +708,16 @@ static int snd_byt_rt5640_mc_probe(struct platform_device *pdev)
byt_rt5640_cpu_dai_name;
}
+ if ((byt_rt5640_quirk & BYT_RT5640_MCLK_EN) && (is_valleyview())) {
+ priv->mclk = devm_clk_get(&pdev->dev, "pmc_plt_clk_3");
+ if (IS_ERR(priv->mclk)) {
+ dev_err(&pdev->dev,
+ "Failed to get MCLK from pmc_plt_clk_3: %ld\n",
+ PTR_ERR(priv->mclk));
+ return PTR_ERR(priv->mclk);
+ }
+ }
+
ret_val = devm_snd_soc_register_card(&pdev->dev, &byt_rt5640_card);
if (ret_val) {
--
2.8.1
More information about the Alsa-devel
mailing list