[alsa-devel] [PATCH 05/17] ASoC: Intel: Atom: add definitions for modem/SSP0 interface
Pierre-Louis Bossart
pierre-louis.bossart at linux.intel.com
Fri Aug 12 23:27:48 CEST 2016
The Atom DPCM driver only allowed for the SSP2 interface, add
definitions for modem/SSP0.
These definitions might be used to route audio to a codec
connected to SSP0 (instead of a modem in traditional usages),
but there is a restriction to 2ch I2S. SSP2 is capable of
handling up to 4 slot TDM.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart at linux.intel.com>
---
sound/soc/intel/atom/sst-atom-controls.c | 17 ++++++++++++++++-
sound/soc/intel/atom/sst-atom-controls.h | 6 ++++++
2 files changed, 22 insertions(+), 1 deletion(-)
diff --git a/sound/soc/intel/atom/sst-atom-controls.c b/sound/soc/intel/atom/sst-atom-controls.c
index 98720a9..28eea12 100644
--- a/sound/soc/intel/atom/sst-atom-controls.c
+++ b/sound/soc/intel/atom/sst-atom-controls.c
@@ -1,4 +1,4 @@
-/*
+ /*
* sst-atom-controls.c - Intel MID Platform driver DPCM ALSA controls for Mrfld
*
* Copyright (C) 2013-14 Intel Corp
@@ -534,6 +534,7 @@ static const DECLARE_TLV_DB_SCALE(sst_gain_tlv_common, SST_GAIN_MIN_VALUE * 10,
/* Look up table to convert MIXER SW bit regs to SWM inputs */
static const uint swm_mixer_input_ids[SST_SWM_INPUT_COUNT] = {
+ [SST_IP_MODEM] = SST_SWM_IN_MODEM,
[SST_IP_CODEC0] = SST_SWM_IN_CODEC0,
[SST_IP_CODEC1] = SST_SWM_IN_CODEC1,
[SST_IP_LOOP0] = SST_SWM_IN_SPROT_LOOP,
@@ -674,6 +675,7 @@ static int sst_swm_mixer_event(struct snd_soc_dapm_widget *w,
/* SBA mixers - 16 inputs */
#define SST_SBA_DECLARE_MIX_CONTROLS(kctl_name) \
static const struct snd_kcontrol_new kctl_name[] = { \
+ SOC_DAPM_SINGLE("modem_in Switch", SND_SOC_NOPM, SST_IP_MODEM, 1, 0), \
SOC_DAPM_SINGLE("codec_in0 Switch", SND_SOC_NOPM, SST_IP_CODEC0, 1, 0), \
SOC_DAPM_SINGLE("codec_in1 Switch", SND_SOC_NOPM, SST_IP_CODEC1, 1, 0), \
SOC_DAPM_SINGLE("sprot_loop_in Switch", SND_SOC_NOPM, SST_IP_LOOP0, 1, 0), \
@@ -684,6 +686,7 @@ static int sst_swm_mixer_event(struct snd_soc_dapm_widget *w,
}
#define SST_SBA_MIXER_GRAPH_MAP(mix_name) \
+ { mix_name, "modem_in Switch", "modem_in" }, \
{ mix_name, "codec_in0 Switch", "codec_in0" }, \
{ mix_name, "codec_in1 Switch", "codec_in1" }, \
{ mix_name, "sprot_loop_in Switch", "sprot_loop_in" }, \
@@ -713,6 +716,7 @@ SST_SBA_DECLARE_MIX_CONTROLS(sst_mix_media_l2_controls);
SST_SBA_DECLARE_MIX_CONTROLS(sst_mix_voip_controls);
SST_SBA_DECLARE_MIX_CONTROLS(sst_mix_codec0_controls);
SST_SBA_DECLARE_MIX_CONTROLS(sst_mix_codec1_controls);
+SST_SBA_DECLARE_MIX_CONTROLS(sst_mix_modem_controls);
/*
* sst_handle_vb_timer - Start/Stop the DSP scheduler
@@ -1047,8 +1051,10 @@ static int sst_set_media_loop(struct snd_soc_dapm_widget *w,
}
static const struct snd_soc_dapm_widget sst_dapm_widgets[] = {
+ SST_AIF_IN("modem_in", sst_set_be_modules),
SST_AIF_IN("codec_in0", sst_set_be_modules),
SST_AIF_IN("codec_in1", sst_set_be_modules),
+ SST_AIF_OUT("modem_out", sst_set_be_modules),
SST_AIF_OUT("codec_out0", sst_set_be_modules),
SST_AIF_OUT("codec_out1", sst_set_be_modules),
@@ -1103,6 +1109,9 @@ static const struct snd_soc_dapm_widget sst_dapm_widgets[] = {
sst_mix_codec0_controls, sst_swm_mixer_event),
SST_SWM_MIXER("codec_out1 mix 0", SND_SOC_NOPM, SST_TASK_SBA, SST_SWM_OUT_CODEC1,
sst_mix_codec1_controls, sst_swm_mixer_event),
+ SST_SWM_MIXER("modem_out mix 0", SND_SOC_NOPM, SST_TASK_SBA, SST_SWM_OUT_MODEM,
+ sst_mix_modem_controls, sst_swm_mixer_event),
+
};
static const struct snd_soc_dapm_route intercon[] = {
@@ -1148,6 +1157,9 @@ static const struct snd_soc_dapm_route intercon[] = {
SST_SBA_MIXER_GRAPH_MAP("codec_out0 mix 0"),
{"codec_out1", NULL, "codec_out1 mix 0"},
SST_SBA_MIXER_GRAPH_MAP("codec_out1 mix 0"),
+ {"modem_out", NULL, "modem_out mix 0"},
+ SST_SBA_MIXER_GRAPH_MAP("modem_out mix 0"),
+
};
static const char * const slot_names[] = {
@@ -1217,6 +1229,9 @@ static const struct snd_kcontrol_new sst_gain_controls[] = {
SST_GAIN("media_loop2_out", SST_PATH_INDEX_MEDIA_LOOP2_OUT, SST_TASK_SBA, 0, &sst_gains[13]),
SST_GAIN("sprot_loop_out", SST_PATH_INDEX_SPROT_LOOP_OUT, SST_TASK_SBA, 0, &sst_gains[14]),
SST_VOLUME("media0_in", SST_PATH_INDEX_MEDIA0_IN, SST_TASK_MMX, 0, &sst_gains[15]),
+ SST_GAIN("modem_in", SST_PATH_INDEX_MODEM_IN, SST_TASK_SBA, 0, &sst_gains[16]),
+ SST_GAIN("modem_out", SST_PATH_INDEX_MODEM_OUT, SST_TASK_SBA, 0, &sst_gains[17]),
+
};
#define SST_GAIN_NUM_CONTROLS 3
diff --git a/sound/soc/intel/atom/sst-atom-controls.h b/sound/soc/intel/atom/sst-atom-controls.h
index e011311..351d814 100644
--- a/sound/soc/intel/atom/sst-atom-controls.h
+++ b/sound/soc/intel/atom/sst-atom-controls.h
@@ -35,6 +35,8 @@ enum {
/* define a bit for each mixer input */
#define SST_MIX_IP(x) (x)
+#define SST_IP_MODEM SST_MIX_IP(0)
+#define SST_IP_BT SST_MIX_IP(1)
#define SST_IP_CODEC0 SST_MIX_IP(2)
#define SST_IP_CODEC1 SST_MIX_IP(3)
#define SST_IP_LOOP0 SST_MIX_IP(4)
@@ -63,6 +65,7 @@ enum {
* Audio DSP Path Ids. Specified by the audio DSP FW
*/
enum sst_path_index {
+ SST_PATH_INDEX_MODEM_OUT = (0x00 << SST_PATH_ID_SHIFT),
SST_PATH_INDEX_CODEC_OUT0 = (0x02 << SST_PATH_ID_SHIFT),
SST_PATH_INDEX_CODEC_OUT1 = (0x03 << SST_PATH_ID_SHIFT),
@@ -80,6 +83,7 @@ enum sst_path_index {
/* Start of input paths */
+ SST_PATH_INDEX_MODEM_IN = (0x80 << SST_PATH_ID_SHIFT),
SST_PATH_INDEX_CODEC_IN0 = (0x82 << SST_PATH_ID_SHIFT),
SST_PATH_INDEX_CODEC_IN1 = (0x83 << SST_PATH_ID_SHIFT),
@@ -105,6 +109,7 @@ enum sst_path_index {
* path IDs
*/
enum sst_swm_inputs {
+ SST_SWM_IN_MODEM = (SST_PATH_INDEX_MODEM_IN | SST_DEFAULT_CELL_NBR),
SST_SWM_IN_CODEC0 = (SST_PATH_INDEX_CODEC_IN0 | SST_DEFAULT_CELL_NBR),
SST_SWM_IN_CODEC1 = (SST_PATH_INDEX_CODEC_IN1 | SST_DEFAULT_CELL_NBR),
SST_SWM_IN_SPROT_LOOP = (SST_PATH_INDEX_SPROT_LOOP_IN | SST_DEFAULT_CELL_NBR),
@@ -124,6 +129,7 @@ enum sst_swm_inputs {
* path IDs
*/
enum sst_swm_outputs {
+ SST_SWM_OUT_MODEM = (SST_PATH_INDEX_MODEM_OUT | SST_DEFAULT_CELL_NBR),
SST_SWM_OUT_CODEC0 = (SST_PATH_INDEX_CODEC_OUT0 | SST_DEFAULT_CELL_NBR),
SST_SWM_OUT_CODEC1 = (SST_PATH_INDEX_CODEC_OUT1 | SST_DEFAULT_CELL_NBR),
SST_SWM_OUT_SPROT_LOOP = (SST_PATH_INDEX_SPROT_LOOP_OUT | SST_DEFAULT_CELL_NBR),
--
2.5.0
More information about the Alsa-devel
mailing list