[alsa-devel] [PATCH 027/127] ASoC: use component probe/remove on sgtl5000

[Kuninori Morimoto]

From: Kuninori Morimoto <kuninori.morimoto.gx at renesas.com>

codec driver and component driver has duplicated .probe/.remove
functions, and codec side is just relayed it. This was quick-hack,
but no longer needed.
This patch uses component .probe/.remove

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx at renesas.com>
---
 sound/soc/codecs/sgtl5000.c | 11 +++--------
 1 file changed, 3 insertions(+), 8 deletions(-)

diff --git a/sound/soc/codecs/sgtl5000.c b/sound/soc/codecs/sgtl5000.c
index a635bd0..77b9244 100644
--- a/sound/soc/codecs/sgtl5000.c
+++ b/sound/soc/codecs/sgtl5000.c
@@ -1083,9 +1083,10 @@ static int sgtl5000_enable_regulators(struct i2c_client *client)
 	return ret;
 }
 
-static int sgtl5000_probe(struct snd_soc_codec *codec)
+static int sgtl5000_probe(struct snd_soc_component *component)
 {
 	int ret;
+	struct snd_soc_codec *codec = snd_soc_component_to_codec(component);
 	struct sgtl5000_priv *sgtl5000 = snd_soc_codec_get_drvdata(codec);
 
 	/* power up sgtl5000 */
@@ -1141,17 +1142,11 @@ err:
 	return ret;
 }
 
-static int sgtl5000_remove(struct snd_soc_codec *codec)
-{
-	return 0;
-}
-
 static struct snd_soc_codec_driver sgtl5000_driver = {
-	.probe = sgtl5000_probe,
-	.remove = sgtl5000_remove,
 	.set_bias_level = sgtl5000_set_bias_level,
 	.suspend_bias_off = true,
 	.component_driver = {
+		.probe			= sgtl5000_probe,
 		.controls		= sgtl5000_snd_controls,
 		.num_controls		= ARRAY_SIZE(sgtl5000_snd_controls),
 		.dapm_widgets		= sgtl5000_dapm_widgets,
-- 
1.9.1