[alsa-devel] [PATCH 2/8] ARM: S3C24XX: Specify audio codec platform_data for mini2440 board

[Sylwester Nawrocki]

The L3 bus GPIOs are specified in the board file rather than through
the sound card's device platform_data. This allows to ensure the codec
driver doesn't get probed with uninitialized platform_data field of
its corresponding platform device.

Signed-off-by: Sylwester Nawrocki <s.nawrocki at samsung.com>
---
 arch/arm/mach-s3c24xx/mach-mini2440.c | 19 +++++++++++++++++++
 1 file changed, 19 insertions(+)

diff --git a/arch/arm/mach-s3c24xx/mach-mini2440.c b/arch/arm/mach-s3c24xx/mach-mini2440.c
index a852168..13999c1 100644
--- a/arch/arm/mach-s3c24xx/mach-mini2440.c
+++ b/arch/arm/mach-s3c24xx/mach-mini2440.c
@@ -497,9 +497,28 @@ static struct i2c_board_info mini2440_i2c_devs[] __initdata = {
 	},
 };
 
+static struct uda134x_platform_data s3c24xx_uda134x = {
+	.l3 = {
+		.gpio_clk = S3C2410_GPB(4),
+		.gpio_data = S3C2410_GPB(3),
+		.gpio_mode = S3C2410_GPB(2),
+		.use_gpios = 1,
+		.data_hold = 1,
+		.data_setup = 1,
+		.clock_high = 1,
+		.mode_hold = 1,
+		.mode = 1,
+		.mode_setup = 1,
+	},
+	.model = UDA134X_UDA1341,
+};
+
 static struct platform_device uda1340_codec = {
 		.name = "uda134x-codec",
 		.id = -1,
+		.dev = {
+			.platform_data	= &s3c24xx_uda134x,
+		},
 };
 
 static struct platform_device *mini2440_devices[] __initdata = {
-- 
1.9.1