[alsa-devel] [PATCH 0/2 v6] Add I2S audio support for ARC AXS10x boards
Jose Abreu
Jose.Abreu at synopsys.com
Wed Apr 27 12:05:18 CEST 2016
ARC AXS10x platforms consist of a mainboard with several peripherals.
One of those peripherals is an HDMI output port controlled by the ADV7511
transmitter.
This patch set adds I2S audio for the AXS10x platform.
Changes v5 -> v6
* Use SNDRV_DMA_TYPE_CONTINUOUS
Changes v4 -> v5
* Resolve undefined references when compiling as module
* Dropped adv7511 audio patches
* Use DMA properties in I2S to check which mode to use: PIO or DMA (as suggested by Lars-Peter Clausen)
Changes v3 -> v4:
* Reintroduced custom PCM driver (see note below)
* Use DT boolean to switch between ALSA DMA engine PCM or custom PCM
* Use fifo depth to program I2S FCR
* Update I2S documentation
Changes v2 -> v3:
* Removed pll_config functions (as suggested by Alexey Brodkin)
* Removed HDMI start at adv7511_core (as suggested by Archit Taneja)
* Use NOP functions for adv7511_audio (as suggested by Archit Taneja)
* Added adv7511_audio_exit() function (as suggested by Archit Taneja)
* Moved adv7511 to its own folder (as suggested by Archit Taneja)
* Separated file rename of adv7511_core (as suggested by Emil Velikov)
* Compile adv7511 as module if ALSA SoC is compiled as module
* Load adv7511 audio only if declared in device tree (as suggested by Laurent Pinchart)
* Dropped custom platform driver, using now ALSA DMA engine
* Dropped IRQ handler for I2S
Changes v1 -> v2:
* DT bindings moved to separate patch (as suggested by Alexey Brodkin)
* Removed defconfigs entries (as suggested by Alexey Brodkin)
NOTE:
Although the mainline I2S driver uses ALSA DMA engine,
this controller can be built without DMA support so it
was necessary to add this custom platform driver so that
HDMI audio works in AXS boards.
Cc: Carlos Palminha <palminha at synopsys.com>
Cc: Mark Brown <broonie at kernel.org>
Cc: Liam Girdwood <lgirdwood at gmail.com>
Cc: Jaroslav Kysela <perex at perex.cz>
Cc: Takashi Iwai <tiwai at suse.com>
Cc: Rob Herring <robh at kernel.org>
Cc: Alexey Brodkin <abrodkin at synopsys.com>
Cc: linux-snps-arc at lists.infradead.org
Cc: alsa-devel at alsa-project.org
Cc: devicetree at vger.kernel.org
Cc: linux-kernel at vger.kernel.org
Jose Abreu (2):
ASoC: dwc: Add custom PCM driver
ASoC: dwc: Update DOCUMENTATION for I2S Driver
.../devicetree/bindings/sound/designware-i2s.txt | 9 +-
sound/soc/dwc/Kconfig | 9 +
sound/soc/dwc/Makefile | 1 +
sound/soc/dwc/designware.h | 71 +++++++
sound/soc/dwc/designware_i2s.c | 94 ++++++---
sound/soc/dwc/designware_pcm.c | 228 +++++++++++++++++++++
6 files changed, 383 insertions(+), 29 deletions(-)
create mode 100644 sound/soc/dwc/designware.h
create mode 100644 sound/soc/dwc/designware_pcm.c
--
1.9.1
More information about the Alsa-devel
mailing list