[alsa-devel] [PATCH 3/3] ASoC: bcm2835: Register also as PCM device

[Matthias Reichl]

On Mon, Apr 25, 2016 at 03:54:18PM +0200, Lars-Peter Clausen wrote:
> On 04/25/2016 03:39 PM, kernel at martin.sperl.org wrote:
> > From: Matthias Reichl <hias at horus.com>
> > 
> > Register i2s also as pcm device.
> 
> This is not really what this patch does.

Agreed, we need a better description.

> > Code ported from bcm2708-i2s driver in Raspberry Pi tree.
> >
> > Signed-off-by: Florian Meier <florian.meier at koalo.de>
> > Signed-off-by: Matthias Reichl <hias at horus.com>
> > Signed-off-by: Martin Sperl <kernel at martin.sperl.org>
> > ---
> >  sound/soc/bcm/bcm2835-i2s.c | 25 ++++++++++++++++++++++++-
> >  1 file changed, 24 insertions(+), 1 deletion(-)
> > 
> > diff --git a/sound/soc/bcm/bcm2835-i2s.c b/sound/soc/bcm/bcm2835-i2s.c
> > index a0026e2..8e93295 100644
> > --- a/sound/soc/bcm/bcm2835-i2s.c
> > +++ b/sound/soc/bcm/bcm2835-i2s.c
> > @@ -632,6 +632,27 @@ static const struct snd_soc_component_driver bcm2835_i2s_component = {
> >  	.name		= "bcm2835-i2s-comp",
> >  };
> >  
> > +static const struct snd_pcm_hardware bcm2835_pcm_hardware = {
> > +	.info			= SNDRV_PCM_INFO_INTERLEAVED |
> > +				  SNDRV_PCM_INFO_JOINT_DUPLEX |
> > +				  SNDRV_PCM_INFO_MMAP |
> > +				  SNDRV_PCM_INFO_MMAP_VALID,
> > +	.formats		= SNDRV_PCM_FMTBIT_S16_LE |
> > +				  SNDRV_PCM_FMTBIT_S24_LE |
> > +				  SNDRV_PCM_FMTBIT_S32_LE,
> > +	.period_bytes_min	= 32,
> > +	.period_bytes_max	= 64 * PAGE_SIZE,

I think it'd be better to use SZ constants instead of x * PAGE_SIZE.

> > +	.periods_min		= 2,
> > +	.periods_max		= 255,
> > +	.buffer_bytes_max	= 128 * PAGE_SIZE,
> > +};
> > +
> > +static const struct snd_dmaengine_pcm_config bcm2835_dmaengine_pcm_config = {
> > +	.prepare_slave_config = snd_dmaengine_pcm_prepare_slave_config,
> > +	.pcm_hardware = &bcm2835_pcm_hardware,
> > +	.prealloc_buffer_size = 256 * PAGE_SIZE,
> > +};
> 
> The generic dmaengine PCM driver auto-discovers these things, no need to
> provide them. The code is OK as it is.

With the auto-discover code we loose the S16_LE format.

If I understood the code in dmaengine_pcm_set_runtime_hwparams
correctly, this is because the DMA controller doesn't support
16bit transfers (only multiples of 32bit are allowed).

But since the I2S driver needs exactly 2 channels S16_LE actually
works fine (one 32bit transfer per frame).

Do you know of a better way to get S16_LE support? It could well
be that I missed something important...

> > +
> >  static int bcm2835_i2s_probe(struct platform_device *pdev)
> >  {
> >  	struct bcm2835_i2s_dev *dev;
> > @@ -704,7 +725,9 @@ static int bcm2835_i2s_probe(struct platform_device *pdev)
> >  		return ret;
> >  	}
> >  
> > -	ret = devm_snd_dmaengine_pcm_register(&pdev->dev, NULL, 0);
> > +	ret = devm_snd_dmaengine_pcm_register(
> > +		&pdev->dev, &bcm2835_dmaengine_pcm_config,
> > +		SND_DMAENGINE_PCM_FLAG_COMPAT);
> >  	if (ret) {
> >  		dev_err(&pdev->dev, "Could not register PCM: %d\n", ret);
> >  		return ret;
> > 
>