[alsa-devel] [PATCH v2 2/6] ASoC: Davinci: McBSP: add device tree support for McBSP
Peter Ujfalusi
peter.ujfalusi at ti.com
Fri Apr 15 11:32:06 CEST 2016
On 04/11/16 14:45, Petr Kulhavy wrote:
> This adds DT support for the TI DA8xx/OMAP-L1x/AM17xx/AM18xx McBSP driver.
>
> Signed-off-by: Petr Kulhavy <petr at barix.com>
> ---
> v1: initial
> v2: remove "-audio" postfix from the compatible string
> of_match_table renamed consistently with the rest of the file (davinci_i2s_match)
> "channel-combine" property removed
> devicetree DMA configuration in probe simplified
>
> sound/soc/davinci/Kconfig | 6 ++-
> sound/soc/davinci/davinci-i2s.c | 116 +++++++++++++++++++++++++++++++---------
> 2 files changed, 95 insertions(+), 27 deletions(-)
>
> diff --git a/sound/soc/davinci/Kconfig b/sound/soc/davinci/Kconfig
> index 50ca291cc225..6b732d8e5896 100644
> --- a/sound/soc/davinci/Kconfig
> +++ b/sound/soc/davinci/Kconfig
> @@ -16,7 +16,11 @@ config SND_EDMA_SOC
> - DRA7xx family
>
> config SND_DAVINCI_SOC_I2S
> - tristate
> + tristate "DaVinci Multichannel Buffered Serial Port (McBSP) support"
> + depends on SND_EDMA_SOC
> + help
> + Say Y or M here if you want to have support for McBSP IP found in
> + Texas Instruments DaVinci DA850 SoCs.
>
> config SND_DAVINCI_SOC_MCASP
> tristate "Multichannel Audio Serial Port (McASP) support"
> diff --git a/sound/soc/davinci/davinci-i2s.c b/sound/soc/davinci/davinci-i2s.c
> index ec98548a5fc9..a3f82d1a73dc 100644
> --- a/sound/soc/davinci/davinci-i2s.c
> +++ b/sound/soc/davinci/davinci-i2s.c
> @@ -4,9 +4,15 @@
> * Author: Vladimir Barinov, <vbarinov at embeddedalley.com>
> * Copyright: (C) 2007 MontaVista Software, Inc., <source at mvista.com>
> *
> + * DT support (c) 2016 Petr Kulhavy, Barix AG <petr at barix.com>
> + * based on davinci-mcasp.c DT support
> + *
> * This program is free software; you can redistribute it and/or modify
> * it under the terms of the GNU General Public License version 2 as
> * published by the Free Software Foundation.
> + *
> + * TODO:
> + * on DA850 implement HW FIFOs instead of DMA into DXR and DRR registers
> */
>
> #include <linux/init.h>
> @@ -648,15 +654,62 @@ static const struct snd_soc_component_driver davinci_i2s_component = {
> .name = "davinci-i2s",
> };
>
> +static struct snd_platform_data*
> +davinci_i2s_set_pdata_from_of(struct platform_device *pdev)
It is a bit misleading function name, would be better to name it as
davinci_i2s_get_pdata()
as it will fetch the legacy pdata or craft one when booting with DT.
> +{
> + struct snd_platform_data *pdata = NULL;
> + struct device_node *np;
> +
> + if (!IS_ENABLED(CONFIG_OF) || !pdev->dev.of_node)
> + return dev_get_platdata(&pdev->dev);
> +
> + pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
> + if (!pdata)
> + return ERR_PTR(-ENOMEM);
> +
> + np = pdev->dev.of_node;
???
> +
> + /* parse properties here */
> +
> + /*
> + * pdata->clk_input_pin is deliberately not exported to DT
> + * and the default value of the clk_input_pin is MCBSP_CLKR.
> + * The value MCBSP_CLKS makes no sense as it turns the CPU
> + * to a bit clock master in the SND_SOC_DAIFMT_CBM_CFS mode
> + * where it should be bit clock slave!
> + */
> +
> + return pdata;
> +}
> +
> static int davinci_i2s_probe(struct platform_device *pdev)
> {
> + struct snd_dmaengine_dai_dma_data *dma_data;
> + struct snd_platform_data *pdata;
> struct davinci_mcbsp_dev *dev;
> struct resource *mem, *res;
> void __iomem *io_base;
> int *dma;
> int ret;
>
> - mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> + pdata = davinci_i2s_set_pdata_from_of(pdev);
> + if (IS_ERR(pdata)) {
> + dev_err(&pdev->dev, "Error populating platform data, err %ld\n",
> + PTR_ERR(pdata));
> + return PTR_ERR(pdata);
> + }
The current driver does not use the pdata as far as I can see. Kind of
strange. So now in DT boot you will allocate memory for the pdata, which is
not used by the driver at all.
I think we should implement the pdata handling in the driver first for the
legacy mode, then probably having pdata allocated for DT case might make sense.
> +
> + mem = platform_get_resource_byname(pdev, IORESOURCE_MEM, "mpu");
> + if (!mem) {
> + dev_warn(&pdev->dev,
> + "\"mpu\" mem resource not found, using index 0\n");
> + mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> + if (!mem) {
> + dev_err(&pdev->dev, "no mem resource?\n");
> + return -ENODEV;
> + }
> + }
> +
> io_base = devm_ioremap_resource(&pdev->dev, mem);
> if (IS_ERR(io_base))
> return PTR_ERR(io_base);
> @@ -666,39 +719,43 @@ static int davinci_i2s_probe(struct platform_device *pdev)
> if (!dev)
> return -ENOMEM;
>
> - dev->clk = clk_get(&pdev->dev, NULL);
> - if (IS_ERR(dev->clk))
> - return -ENODEV;
> - clk_enable(dev->clk);
> -
> dev->base = io_base;
>
> - dev->dma_data[SNDRV_PCM_STREAM_PLAYBACK].addr =
> - (dma_addr_t)(mem->start + DAVINCI_MCBSP_DXR_REG);
> -
> - dev->dma_data[SNDRV_PCM_STREAM_CAPTURE].addr =
> - (dma_addr_t)(mem->start + DAVINCI_MCBSP_DRR_REG);
> + /* setup DMA, first TX, then RX */
> + dma_data = &dev->dma_data[SNDRV_PCM_STREAM_PLAYBACK];
> + dma_data->addr = (dma_addr_t)(mem->start + DAVINCI_MCBSP_DXR_REG);
>
> - /* first TX, then RX */
> res = platform_get_resource(pdev, IORESOURCE_DMA, 0);
> - if (!res) {
> - dev_err(&pdev->dev, "no DMA resource\n");
> - ret = -ENXIO;
> - goto err_release_clk;
> + if (res) {
> + dma = &dev->dma_request[SNDRV_PCM_STREAM_PLAYBACK];
> + *dma = res->start;
> + dma_data->filter_data = dma;
> + } else if (IS_ENABLED(CONFIG_OF) && pdev->dev.of_node) {
> + dma_data->filter_data = "tx";
> + } else {
> + dev_err(&pdev->dev, "Missing DMA tx resource\n");
> + return -ENODEV;
> }
> - dma = &dev->dma_request[SNDRV_PCM_STREAM_PLAYBACK];
> - *dma = res->start;
> - dev->dma_data[SNDRV_PCM_STREAM_PLAYBACK].filter_data = dma;
> +
> + dma_data = &dev->dma_data[SNDRV_PCM_STREAM_CAPTURE];
> + dma_data->addr = (dma_addr_t)(mem->start + DAVINCI_MCBSP_DRR_REG);
>
> res = platform_get_resource(pdev, IORESOURCE_DMA, 1);
> - if (!res) {
> - dev_err(&pdev->dev, "no DMA resource\n");
> - ret = -ENXIO;
> - goto err_release_clk;
> + if (res) {
> + dma = &dev->dma_request[SNDRV_PCM_STREAM_CAPTURE];
> + *dma = res->start;
> + dma_data->filter_data = dma;
> + } else if (IS_ENABLED(CONFIG_OF) && pdev->dev.of_node) {
> + dma_data->filter_data = "rx";
> + } else {
> + dev_err(&pdev->dev, "Missing DMA rx resource\n");
> + return -ENODEV;
> }
> - dma = &dev->dma_request[SNDRV_PCM_STREAM_CAPTURE];
> - *dma = res->start;
> - dev->dma_data[SNDRV_PCM_STREAM_CAPTURE].filter_data = dma;
> +
> + dev->clk = clk_get(&pdev->dev, NULL);
> + if (IS_ERR(dev->clk))
> + return -ENODEV;
> + clk_enable(dev->clk);
>
> dev->dev = &pdev->dev;
> dev_set_drvdata(&pdev->dev, dev);
> @@ -737,11 +794,18 @@ static int davinci_i2s_remove(struct platform_device *pdev)
> return 0;
> }
>
> +static const struct of_device_id davinci_i2s_match[] = {
> + { .compatible = "ti,da850-mcbsp" },
> + {},
> +};
> +MODULE_DEVICE_TABLE(of, davinci_i2s_match);
> +
> static struct platform_driver davinci_mcbsp_driver = {
> .probe = davinci_i2s_probe,
> .remove = davinci_i2s_remove,
> .driver = {
> .name = "davinci-mcbsp",
> + .of_match_table = of_match_ptr(davinci_i2s_match),
> },
> };
The rest looks good to me.
--
Péter
More information about the Alsa-devel
mailing list