[alsa-devel] [PATCH 1/3 v2] drm/i2c/adv7511: Add audio support

[Laurent Pinchart]

Hi Jose,

Thank you for the patch.

On Monday 28 Mar 2016 15:36:09 Jose Abreu wrote:
> This patch adds audio support for the ADV7511 HDMI transmitter
> using ALSA SoC.
> 
> The code was ported from Analog Devices linux tree from
> commit 1770c4a1e32b ("Merge remote-tracking branch
> 'xilinx/master' into xcomm_zynq"), which is available at:
> 	- https://github.com/analogdevicesinc/linux/
> 
> The main core file was renamed from adv7511.c to adv7511_core.c
> so that audio and video compile into a single adv7511.ko module
> and to keep up with Analog Devices kernel tree.
> 
> The audio can be disabled using menu-config so it is possible
> to use only video mode.
> 
> The HDMI mode is automatically started at boot and the audio
> (when enabled) registers as a codec into ALSA.
> 
> SPDIF DAI format was also added to ASoC as it is required
> by adv7511 audio.
> 
> Signed-off-by: Jose Abreu <joabreu at synopsys.com>
> ---
> 
> No changes v1 -> v2.
> 
>  drivers/gpu/drm/i2c/Kconfig         |   11 +
>  drivers/gpu/drm/i2c/Makefile        |    2 +
>  drivers/gpu/drm/i2c/adv7511.c       | 1024 -------------------------------
>  drivers/gpu/drm/i2c/adv7511.h       |   41 ++
>  drivers/gpu/drm/i2c/adv7511_audio.c |  310 +++++++++++
>  drivers/gpu/drm/i2c/adv7511_core.c  | 1005 ++++++++++++++++++++++++++++++

Please use git-format-patch -M to detect renames if you send a new version of 
this series, it will help with review.

>  include/sound/soc-dai.h             |    1 +
>  7 files changed, 1370 insertions(+), 1024 deletions(-)
>  delete mode 100644 drivers/gpu/drm/i2c/adv7511.c
>  create mode 100644 drivers/gpu/drm/i2c/adv7511_audio.c
>  create mode 100644 drivers/gpu/drm/i2c/adv7511_core.c

[snip]

> diff --git a/drivers/gpu/drm/i2c/adv7511_core.c
> b/drivers/gpu/drm/i2c/adv7511_core.c new file mode 100644
> index 0000000..d54256a
> --- /dev/null
> +++ b/drivers/gpu/drm/i2c/adv7511_core.c

[snip]

> +static int adv7511_probe(struct i2c_client *i2c, const struct i2c_device_id
> *id) +{
> +	struct adv7511_link_config link_config;
> +	struct adv7511 *adv7511;
> +	struct device *dev = &i2c->dev;
> +	unsigned int val;
> +	int ret;
> +
> +	if (!dev->of_node)
> +		return -EINVAL;
> +
> +	adv7511 = devm_kzalloc(dev, sizeof(*adv7511), GFP_KERNEL);
> +	if (!adv7511)
> +		return -ENOMEM;
> +
> +	adv7511->powered = false;
> +	adv7511->status = connector_status_disconnected;
> +
> +	ret = adv7511_parse_dt(dev->of_node, &link_config);
> +	if (ret)
> +		return ret;
> +
> +	/*
> +	 * The power down GPIO is optional. If present, toggle it from active to
> +	 * inactive to wake up the encoder.
> +	 */
> +	adv7511->gpio_pd = devm_gpiod_get_optional(dev, "pd", GPIOD_OUT_HIGH);
> +	if (IS_ERR(adv7511->gpio_pd))
> +		return PTR_ERR(adv7511->gpio_pd);
> +
> +	if (adv7511->gpio_pd) {
> +		mdelay(5);
> +		gpiod_set_value_cansleep(adv7511->gpio_pd, 0);
> +	}
> +
> +	adv7511->regmap = devm_regmap_init_i2c(i2c, &adv7511_regmap_config);
> +	if (IS_ERR(adv7511->regmap))
> +		return PTR_ERR(adv7511->regmap);
> +
> +	ret = regmap_read(adv7511->regmap, ADV7511_REG_CHIP_REVISION, &val);
> +	if (ret)
> +		return ret;
> +	dev_dbg(dev, "Rev. %d\n", val);
> +
> +	ret = regmap_register_patch(adv7511->regmap, adv7511_fixed_registers,
> +				    ARRAY_SIZE(adv7511_fixed_registers));
> +	if (ret)
> +		return ret;
> +
> +	regmap_write(adv7511->regmap, ADV7511_REG_EDID_I2C_ADDR, edid_i2c_addr);
> +	regmap_write(adv7511->regmap, ADV7511_REG_PACKET_I2C_ADDR,
> +		     packet_i2c_addr);
> +	regmap_write(adv7511->regmap, ADV7511_REG_CEC_I2C_ADDR, cec_i2c_addr);
> +	adv7511_packet_disable(adv7511, 0xffff);
> +
> +	adv7511->i2c_main = i2c;
> +	adv7511->i2c_edid = i2c_new_dummy(i2c->adapter, edid_i2c_addr >> 1);
> +	if (!adv7511->i2c_edid)
> +		return -ENOMEM;
> +
> +	if (i2c->irq) {
> +		init_waitqueue_head(&adv7511->wq);
> +
> +		ret = devm_request_threaded_irq(dev, i2c->irq, NULL,
> +						adv7511_irq_handler,
> +						IRQF_ONESHOT, dev_name(dev),
> +						adv7511);
> +		if (ret)
> +			goto err_i2c_unregister_device;
> +	}
> +
> +	/* CEC is unused for now */
> +	regmap_write(adv7511->regmap, ADV7511_REG_CEC_CTRL,
> +		     ADV7511_CEC_CTRL_POWER_DOWN);
> +
> +	adv7511_power_off(adv7511);
> +
> +	i2c_set_clientdata(i2c, adv7511);
> +
> +#ifdef CONFIG_DRM_I2C_ADV7511_AUDIO
> +	adv7511_audio_init(&i2c->dev);
> +#endif

Shouldn't we condition this to the audio channel being somehow described in DT 
? If a board doesn't route audio signals to the ADV7511 audio input, there's 
no need to register an audio codec.

> +
> +	adv7511_set_link_config(adv7511, &link_config);
> +
> +	/* Enable HDMI mode */
> +	regmap_update_bits(adv7511->regmap, ADV7511_REG_HDCP_HDMI_CFG,
> +			ADV7511_HDMI_CFG_MODE_MASK,
> +			ADV7511_HDMI_CFG_MODE_HDMI);
> +
> +	return 0;
> +
> +err_i2c_unregister_device:
> +	i2c_unregister_device(adv7511->i2c_edid);
> +
> +	return ret;
> +}

-- 
Regards,

Laurent Pinchart