[alsa-devel] [RFC 3/5] ASoC: codec: hdmi drm codec driver
Jyri Sarha
jsarha at ti.com
Fri Sep 25 16:11:50 CEST 2015
Despite my earlier comment this implementation and the related HW is
quite similar in all significant aspects to the patch set posted couple
of days ago [1] for Beaglebone-Black HDMI audio.
[1] http://permalink.gmane.org/gmane.linux.alsa.devel/144144
I have not yet gotten to bottom of drm-side audio bride part, but I am
working on it. Bellow is couple of early comments to the ASoC part.
Best regards,
Jyri
On 09/21/15 16:19, Arnaud Pouliquen wrote:
> Add a generic codec to interface audio with DRM drivers
>
> Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen at st.com>
> ---
> include/sound/hdmi_drm.h | 16 ++++++
> sound/soc/codecs/Kconfig | 4 ++
> sound/soc/codecs/Makefile | 2 +
> sound/soc/codecs/hdmi_drm.c | 125 ++++++++++++++++++++++++++++++++++++++++++++
> 4 files changed, 147 insertions(+)
> create mode 100644 include/sound/hdmi_drm.h
> create mode 100644 sound/soc/codecs/hdmi_drm.c
>
> diff --git a/include/sound/hdmi_drm.h b/include/sound/hdmi_drm.hhere are several important callbacks missing here
> new file mode 100644
> index 0000000..0146b88
> --- /dev/null
> +++ b/include/sound/hdmi_drm.h
> @@ -0,0 +1,16 @@
> +/*
> + * Interface for HDMI DRM codec
> + *
> + * Author: Arnaud Pouliquen <arnaud.pouliquen at st.com>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +#ifndef __HDMI_DRM__H__
> +#define __HDMI_DRM__H__
> +
> +int hdmi_drm_codec_register(struct device *dev);
> +void hdmi_drm_codec_unregister(struct device *dev);
> +
> +#endif
> diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig
> index 0c9733e..922af30 100644
> --- a/sound/soc/codecs/Kconfig
> +++ b/sound/soc/codecs/Kconfig
> @@ -80,6 +80,7 @@ config SND_SOC_ALL_CODECS
> select SND_SOC_MC13783 if MFD_MC13XXX
> select SND_SOC_ML26124 if I2C
> select SND_SOC_HDMI_CODEC
> + select SND_SOC_HDMI_DRM_CODEC
> select SND_SOC_PCM1681 if I2C
> select SND_SOC_PCM1792A if SPI_MASTER
> select SND_SOC_PCM3008
> @@ -445,6 +446,9 @@ config SND_SOC_DMIC
> config SND_SOC_HDMI_CODEC
> tristate "HDMI stub CODEC"
>
> +config SND_SOC_HDMI_DRM_CODEC
> + tristate "HDMI DRM CODEC"
> +
> config SND_SOC_ES8328
> tristate "Everest Semi ES8328 CODEC"
>
> diff --git a/sound/soc/codecs/Makefile b/sound/soc/codecs/Makefile
> index 4a32077..c92aaf7 100644
> --- a/sound/soc/codecs/Makefile
> +++ b/sound/soc/codecs/Makefile
> @@ -73,6 +73,7 @@ snd-soc-max9850-objs := max9850.o
> snd-soc-mc13783-objs := mc13783.o
> snd-soc-ml26124-objs := ml26124.o
> snd-soc-hdmi-codec-objs := hdmi.o
> +snd-soc-hdmi-drm-codec-objs := hdmi_drm.o
> snd-soc-pcm1681-objs := pcm1681.o
> snd-soc-pcm1792a-codec-objs := pcm1792a.o
> snd-soc-pcm3008-objs := pcm3008.o
> @@ -265,6 +266,7 @@ obj-$(CONFIG_SND_SOC_MAX9850) += snd-soc-max9850.o
> obj-$(CONFIG_SND_SOC_MC13783) += snd-soc-mc13783.o
> obj-$(CONFIG_SND_SOC_ML26124) += snd-soc-ml26124.o
> obj-$(CONFIG_SND_SOC_HDMI_CODEC) += snd-soc-hdmi-codec.o
> +obj-$(CONFIG_SND_SOC_HDMI_DRM_CODEC) += snd-soc-hdmi-drm-codec.o
> obj-$(CONFIG_SND_SOC_PCM1681) += snd-soc-pcm1681.o
> obj-$(CONFIG_SND_SOC_PCM1792A) += snd-soc-pcm1792a-codec.o
> obj-$(CONFIG_SND_SOC_PCM3008) += snd-soc-pcm3008.o
> diff --git a/sound/soc/codecs/hdmi_drm.c b/sound/soc/codecs/hdmi_drm.c
> new file mode 100644
> index 0000000..2df9a8f
> --- /dev/null
> +++ b/sound/soc/codecs/hdmi_drm.c
> @@ -0,0 +1,125 @@
> +/*
> + * ALSA SoC codec driver for DRM HDMI device.
> + * Copyright (C) STMicroelectronics SA 2015
> + * Authors: Arnaud Pouliquen <arnaud.pouliquen at st.com>
> + * for STMicroelectronics.
> + * License terms: GNU General Public License (GPL), version 2
> + */
> +
> +#include <linux/module.h>
> +#include <sound/soc.h>
> +#include <linux/of.h>
> +#include <linux/of_device.h>
> +
> +#include <drm/drm_crtc_helper.h>
> +
> +struct hdmi_drm_dai_data {
> + struct drm_bridge *bridge;
> +};here are several important callbacks missing here
> +
> +static const struct snd_soc_dapm_widget hdmi_drm_widgets[] = {
> + SND_SOC_DAPM_OUTPUT("TX"),
> +};
> +
> +static const struct snd_soc_dapm_route hdmi_drm_routes[] = {
> + { "TX", NULL, "Playback" },
> +};
> +
> +int hdmi_drm_dai_prepare(struct snd_pcm_substream *substream,
> + struct snd_soc_dai *dai)
> +{
> + struct hdmi_drm_dai_data *priv = snd_soc_dai_get_drvdata(dai);
> +
> + dev_err(dai->dev, "%s: enter for bridge %p\n", __func__, priv->bridge);
> + drm_audio_bridge_pre_enable(priv->bridge);
> + return 0;
> +}
> +
> +int hdmi_drm_dai_trigger(struct snd_pcm_substream *substream, int cmd,
> + struct snd_soc_dai *dai)
> +{
> + struct hdmi_drm_dai_data *priv = snd_soc_dai_get_drvdata(dai);
> +
> + dev_err(dai->dev, "%s: enter\n", __func__);
> + switch (cmd) {
> + case SNDRV_PCM_TRIGGER_START:
> + case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
> + case SNDRV_PCM_TRIGGER_RESUME:
> + drm_audio_bridge_enable(priv->bridge);
> + break;
> +
> + case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
> + case SNDRV_PCM_TRIGGER_STOP:
> + case SNDRV_PCM_TRIGGER_SUSPEND:
> + drm_audio_bridge_disable(priv->bridge);
> + break;
> + }
> +
> + return 0;here are several important callbacks missing here
> +}
> +
> +static int st_hdmi_dai_probe(struct snd_soc_dai *dai)
> +{
> + struct hdmi_drm_dai_data *priv;
> +
> + dev_err(dai->dev, "%s: enter\n", __func__);
> + priv = devm_kzalloc(dai->dev, sizeof(*priv), GFP_KERNEL);
> +
> + priv->bridge = of_drm_find_bridge(dai->dev->of_node);
> +
> + dev_err(dai->dev, "%s: bridge %p\n", __func__, priv->bridge);
> +
> + snd_soc_dai_set_drvdata(dai, priv);
> +
The call above overwrites the private data pointer of the drivers that
registering the codec. This hardly works in general.
A separate platform driver - with this already merged patch [2] - that I
use with my patch-set solves this issue quite nicely.
[2] http://lists.freedesktop.org/archives/dri-devel/2015-May/083517.html
> + return 0;
> +}here are several important callbacks missing here
> +
> +static const struct snd_soc_dai_ops hdmi_drm_codec_ops = {
> + .prepare = hdmi_drm_dai_prepare,
> + .trigger = hdmi_drm_dai_trigger,
> +};
At least set_daifmt() and hw_params() callbacks should be defined before
this could be generally usable. HDMI encoders do not usually support too
many daifmts, but the driver should be able the check that the selected
format is supported. But as you said this not complete code yet.
> +
> +static struct snd_soc_dai_driver hdmi_drm_codec_dai = {
> + .name = "hdmi-hifi",
> + .playback = {
> + .stream_name = "Playback",
> + .channels_min = 2,
> + .channels_max = 8,
> + .rates = SNDRV_PCM_RATE_32000 |
> + SNDRV_PCM_RATE_44100 | SNDRV_PCM_RATE_48000 |
> + SNDRV_PCM_RATE_88200 | SNDRV_PCM_RATE_96000 |
> + SNDRV_PCM_RATE_176400 | SNDRV_PCM_RATE_192000,
> + .formats = SNDRV_PCM_FMTBIT_S16_LE |
> + SNDRV_PCM_FMTBIT_S24_LE | SNDRV_PCM_FMTBIT_S32_LE,
> + .sig_bits = 24,
> + },11.3
> + .probe = st_hdmi_dai_probe,
> + .ops = &hdmi_drm_codec_ops,
> +};
> +
> +static struct snd_soc_codec_driver hdmi_drm_codec = {
> + .dapm_widgets = hdmi_drm_widgets,
> + .num_dapm_widgets = ARRAY_SIZE(hdmi_drm_widgets),
> + .dapm_routes = hdmi_drm_routes,
> + .num_dapm_routes = ARRAY_SIZE(hdmi_drm_routes),
> + .ignore_pmdown_time = true,
> +};
> +
> +int hdmi_drm_codec_register(struct device *dev)
> +{
> + dev_err(dev, "%s: enter", __func__);
> + return snd_soc_register_codec(dev, &hdmi_drm_codec,
> + &hdmi_drm_codec_dai, 1);
> +}
> +EXPORT_SYMBOL_GPL(hdmi_drm_codec_register);
> +
> +void hdmi_drm_codec_unregister(struct device *dev)
> +{
> + dev_err(dev, "%s: enter", __func__);
> + snd_soc_unregister_codec(dev);
> +}
> +EXPORT_SYMBOL_GPL(hdmi_drm_codec_unregister);
> +
> +MODULE_AUTHOR("Arnaud.pouliquen at st.com");
> +MODULE_DESCRIPTION("ASoC HDMI codec driver");
> +MODULE_LICENSE("GPL");
>
More information about the Alsa-devel
mailing list