[alsa-devel] [PATCH 2/3] ASoC: da7219: Add bindings documentation for DA7219 audio codec

[Mark Brown]

On Thu, Sep 17, 2015 at 05:01:16PM +0100, Adam Thomson wrote:

> +- dlg,io-lvl : Expected voltage level range for digital IO
> +	["2.5V_3.6V", "1.2V_2.8V"]

If the driver needs to read or set the voltage a supply is at it should
do that via the regulator API.

> +- dlg,cp-mchange : Charge pump voltage tracking mode
> +	["largest_vol", "dac_vol", "sig_mag"]
> +- dlg,cp-vol-thresh : Charge pump volume threshold value (6-bit value)
> +	[ 0 - 0x3F ]

Why are these in the device tree rather than runtime parameters?

> +Child node - 'da7219_aad':
> +
> +Required properties:
> +- interrupt-parent : Specifies the phandle of the interrupt controller to which
> +  the IRQs from DA7219 AAD block are delivered to.
> +- interrupts : IRQ line info for DA7219 AAD block.
> +  (See Documentation/devicetree/bindings/interrupt-controller/interrupts.txt for
> +   further information relating to interrupt properties)

Why is this not specified at the device level (the device does not
appear to support other interrupts)?
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 473 bytes
Desc: Digital signature
URL: <http://mailman.alsa-project.org/pipermail/alsa-devel/attachments/20150919/69da7761/attachment.sig>