[alsa-devel] Applied "ASoC: fsl-asoc-card: add AC'97 support" to the asoc tree
Mark Brown
broonie at kernel.org
Wed Sep 16 22:01:53 CEST 2015
The patch
ASoC: fsl-asoc-card: add AC'97 support
has been applied to the asoc tree at
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git
All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying
to this mail.
Thanks,
Mark
>From e06b508481e1916b25038289b945104009d774c9 Mon Sep 17 00:00:00 2001
From: "Maciej S. Szmigiero" <mail at maciej.szmigiero.name>
Date: Mon, 31 Aug 2015 17:11:35 +0200
Subject: [PATCH] ASoC: fsl-asoc-card: add AC'97 support
Add AC'97 support to fsl-asoc-card using generic
ASoC AC'97 CODEC.
The SSI controller will silently enable any TX
AC'97 slots that have their bits set in SLOTREQ
received from CODEC and then will redirect some
of playback samples there.
That's why it is important to make sure that
any of CODEC playback slots that can pull samples
are set to slots 3/4 (standard PCM playback slots).
Currently, this applies to S/PDIF slots as they
were seen to pull samples sometimes even with
S/PDIF output being disabled.
Signed-off-by: Maciej Szmigiero <mail at maciej.szmigiero.name>
Signed-off-by: Mark Brown <broonie at kernel.org>
---
.../devicetree/bindings/sound/fsl-asoc-card.txt | 10 +-
sound/soc/fsl/fsl-asoc-card.c | 145 ++++++++++++++++-----
2 files changed, 120 insertions(+), 35 deletions(-)
diff --git a/Documentation/devicetree/bindings/sound/fsl-asoc-card.txt b/Documentation/devicetree/bindings/sound/fsl-asoc-card.txt
index a96774c..ce55c0a 100644
--- a/Documentation/devicetree/bindings/sound/fsl-asoc-card.txt
+++ b/Documentation/devicetree/bindings/sound/fsl-asoc-card.txt
@@ -13,13 +13,15 @@ So having this generic sound card allows all Freescale SoC users to benefit
from the simplification of a new card support and the capability of the wide
sample rates support through ASRC.
-Note: The card is initially designed for those sound cards who use I2S and
- PCM DAI formats. However, it'll be also possible to support those non
- I2S/PCM type sound cards, such as S/PDIF audio and HDMI audio, as long
- as the driver has been properly upgraded.
+Note: The card is initially designed for those sound cards who use AC'97, I2S
+ and PCM DAI formats. However, it'll be also possible to support those non
+ AC'97/I2S/PCM type sound cards, such as S/PDIF audio and HDMI audio, as
+ long as the driver has been properly upgraded.
The compatible list for this generic sound card currently:
+ "fsl,imx-audio-ac97"
+
"fsl,imx-audio-cs42888"
"fsl,imx-audio-wm8962"
diff --git a/sound/soc/fsl/fsl-asoc-card.c b/sound/soc/fsl/fsl-asoc-card.c
index 5aeb6ed..86aa498 100644
--- a/sound/soc/fsl/fsl-asoc-card.c
+++ b/sound/soc/fsl/fsl-asoc-card.c
@@ -14,6 +14,9 @@
#include <linux/i2c.h>
#include <linux/module.h>
#include <linux/of_platform.h>
+#if IS_ENABLED(CONFIG_SND_AC97_CODEC)
+#include <sound/ac97_codec.h>
+#endif
#include <sound/pcm_params.h>
#include <sound/soc.h>
@@ -115,6 +118,11 @@ static const struct snd_soc_dapm_widget fsl_asoc_card_dapm_widgets[] = {
SND_SOC_DAPM_MIC("DMIC", NULL),
};
+static bool fsl_asoc_card_is_ac97(struct fsl_asoc_card_priv *priv)
+{
+ return priv->dai_fmt == SND_SOC_DAIFMT_AC97;
+}
+
static int fsl_asoc_card_hw_params(struct snd_pcm_substream *substream,
struct snd_pcm_hw_params *params)
{
@@ -133,7 +141,9 @@ static int fsl_asoc_card_hw_params(struct snd_pcm_substream *substream,
* set_bias_level(), bypass the remaining settings in hw_params().
* Note: (dai_fmt & CBM_CFM) includes CBM_CFM and CBM_CFS.
*/
- if (priv->card.set_bias_level && priv->dai_fmt & SND_SOC_DAIFMT_CBM_CFM)
+ if ((priv->card.set_bias_level &&
+ priv->dai_fmt & SND_SOC_DAIFMT_CBM_CFM) ||
+ fsl_asoc_card_is_ac97(priv))
return 0;
/* Specific configurations of DAIs starts from here */
@@ -300,7 +310,7 @@ static int fsl_asoc_card_audmux_init(struct device_node *np,
ext_port--;
/*
- * Use asynchronous mode (6 wires) for all cases.
+ * Use asynchronous mode (6 wires) for all cases except AC97.
* If only 4 wires are needed, just set SSI into
* synchronous mode and enable 4 PADs in IOMUX.
*/
@@ -346,15 +356,30 @@ static int fsl_asoc_card_audmux_init(struct device_node *np,
IMX_AUDMUX_V2_PTCR_TCLKDIR;
break;
default:
- return -EINVAL;
+ if (!fsl_asoc_card_is_ac97(priv))
+ return -EINVAL;
+ }
+
+ if (fsl_asoc_card_is_ac97(priv)) {
+ int_ptcr = IMX_AUDMUX_V2_PTCR_SYN |
+ IMX_AUDMUX_V2_PTCR_TCSEL(ext_port) |
+ IMX_AUDMUX_V2_PTCR_TCLKDIR;
+ ext_ptcr = IMX_AUDMUX_V2_PTCR_SYN |
+ IMX_AUDMUX_V2_PTCR_TFSEL(int_port) |
+ IMX_AUDMUX_V2_PTCR_TFSDIR;
}
/* Asynchronous mode can not be set along with RCLKDIR */
- ret = imx_audmux_v2_configure_port(int_port, 0,
- IMX_AUDMUX_V2_PDCR_RXDSEL(ext_port));
- if (ret) {
- dev_err(dev, "audmux internal port setup failed\n");
- return ret;
+ if (!fsl_asoc_card_is_ac97(priv)) {
+ unsigned int pdcr =
+ IMX_AUDMUX_V2_PDCR_RXDSEL(ext_port);
+
+ ret = imx_audmux_v2_configure_port(int_port, 0,
+ pdcr);
+ if (ret) {
+ dev_err(dev, "audmux internal port setup failed\n");
+ return ret;
+ }
}
ret = imx_audmux_v2_configure_port(int_port, int_ptcr,
@@ -364,11 +389,16 @@ static int fsl_asoc_card_audmux_init(struct device_node *np,
return ret;
}
- ret = imx_audmux_v2_configure_port(ext_port, 0,
- IMX_AUDMUX_V2_PDCR_RXDSEL(int_port));
- if (ret) {
- dev_err(dev, "audmux external port setup failed\n");
- return ret;
+ if (!fsl_asoc_card_is_ac97(priv)) {
+ unsigned int pdcr =
+ IMX_AUDMUX_V2_PDCR_RXDSEL(int_port);
+
+ ret = imx_audmux_v2_configure_port(ext_port, 0,
+ pdcr);
+ if (ret) {
+ dev_err(dev, "audmux external port setup failed\n");
+ return ret;
+ }
}
ret = imx_audmux_v2_configure_port(ext_port, ext_ptcr,
@@ -389,6 +419,23 @@ static int fsl_asoc_card_late_probe(struct snd_soc_card *card)
struct device *dev = card->dev;
int ret;
+ if (fsl_asoc_card_is_ac97(priv)) {
+#if IS_ENABLED(CONFIG_SND_AC97_CODEC)
+ struct snd_soc_codec *codec = card->rtd[0].codec;
+ struct snd_ac97 *ac97 = snd_soc_codec_get_drvdata(codec);
+
+ /*
+ * Use slots 3/4 for S/PDIF so SSI won't try to enable
+ * other slots and send some samples there
+ * due to SLOTREQ bits for S/PDIF received from codec
+ */
+ snd_ac97_update_bits(ac97, AC97_EXTENDED_STATUS,
+ AC97_EA_SPSA_SLOT_MASK, AC97_EA_SPSA_3_4);
+#endif
+
+ return 0;
+ }
+
ret = snd_soc_dai_set_sysclk(codec_dai, codec_priv->mclk_id,
codec_priv->mclk_freq, SND_SOC_CLOCK_IN);
if (ret) {
@@ -404,10 +451,9 @@ static int fsl_asoc_card_probe(struct platform_device *pdev)
struct device_node *cpu_np, *codec_np, *asrc_np;
struct device_node *np = pdev->dev.of_node;
struct platform_device *asrc_pdev = NULL;
- struct platform_device *cpu_pdev;
+ struct platform_device *cpu_pdev, *codec_pdev;
struct fsl_asoc_card_priv *priv;
- struct i2c_client *codec_dev;
- struct clk *codec_clk;
+ struct i2c_client *codec_i2c_dev;
const char *codec_dai_name;
u32 width;
int ret;
@@ -420,9 +466,8 @@ static int fsl_asoc_card_probe(struct platform_device *pdev)
/* Give a chance to old DT binding */
if (!cpu_np)
cpu_np = of_parse_phandle(np, "ssi-controller", 0);
- codec_np = of_parse_phandle(np, "audio-codec", 0);
- if (!cpu_np || !codec_np) {
- dev_err(&pdev->dev, "phandle missing or invalid\n");
+ if (!cpu_np) {
+ dev_err(&pdev->dev, "CPU phandle missing or invalid\n");
ret = -EINVAL;
goto fail;
}
@@ -434,11 +479,13 @@ static int fsl_asoc_card_probe(struct platform_device *pdev)
goto fail;
}
- codec_dev = of_find_i2c_device_by_node(codec_np);
- if (!codec_dev) {
- dev_err(&pdev->dev, "failed to find codec platform device\n");
- ret = -EINVAL;
- goto fail;
+ codec_np = of_parse_phandle(np, "audio-codec", 0);
+ if (codec_np) {
+ codec_pdev = of_find_device_by_node(codec_np);
+ codec_i2c_dev = of_find_i2c_device_by_node(codec_np);
+ } else {
+ codec_pdev = NULL;
+ codec_i2c_dev = NULL;
}
asrc_np = of_parse_phandle(np, "audio-asrc", 0);
@@ -446,10 +493,13 @@ static int fsl_asoc_card_probe(struct platform_device *pdev)
asrc_pdev = of_find_device_by_node(asrc_np);
/* Get the MCLK rate only, and leave it controlled by CODEC drivers */
- codec_clk = clk_get(&codec_dev->dev, NULL);
- if (!IS_ERR(codec_clk)) {
- priv->codec_priv.mclk_freq = clk_get_rate(codec_clk);
- clk_put(codec_clk);
+ if (codec_pdev) {
+ struct clk *codec_clk = clk_get(&codec_pdev->dev, NULL);
+
+ if (!IS_ERR(codec_clk)) {
+ priv->codec_priv.mclk_freq = clk_get_rate(codec_clk);
+ clk_put(codec_clk);
+ }
}
/* Default sample rate and format, will be updated in hw_params() */
@@ -486,11 +536,21 @@ static int fsl_asoc_card_probe(struct platform_device *pdev)
priv->codec_priv.fll_id = WM8960_SYSCLK_AUTO;
priv->codec_priv.pll_id = WM8960_SYSCLK_AUTO;
priv->dai_fmt |= SND_SOC_DAIFMT_CBM_CFM;
+ } else if (of_device_is_compatible(np, "fsl,imx-audio-ac97")) {
+ codec_dai_name = "ac97-hifi";
+ priv->card.set_bias_level = NULL;
+ priv->dai_fmt = SND_SOC_DAIFMT_AC97;
} else {
dev_err(&pdev->dev, "unknown Device Tree compatible\n");
return -EINVAL;
}
+ if (!fsl_asoc_card_is_ac97(priv) && !codec_pdev) {
+ dev_err(&pdev->dev, "failed to find codec platform device\n");
+ ret = -EINVAL;
+ goto asrc_fail;
+ }
+
/* Common settings for corresponding Freescale CPU DAI driver */
if (strstr(cpu_np->name, "ssi")) {
/* Only SSI needs to configure AUDMUX */
@@ -507,7 +567,9 @@ static int fsl_asoc_card_probe(struct platform_device *pdev)
priv->cpu_priv.sysclk_id[0] = FSL_SAI_CLK_MAST1;
}
- sprintf(priv->name, "%s-audio", codec_dev->name);
+ snprintf(priv->name, sizeof(priv->name), "%s-audio",
+ fsl_asoc_card_is_ac97(priv) ? "ac97" :
+ codec_i2c_dev ? codec_i2c_dev->name : codec_pdev->name);
/* Initialize sound card */
priv->pdev = pdev;
@@ -531,8 +593,26 @@ static int fsl_asoc_card_probe(struct platform_device *pdev)
/* Normal DAI Link */
priv->dai_link[0].cpu_of_node = cpu_np;
- priv->dai_link[0].codec_of_node = codec_np;
priv->dai_link[0].codec_dai_name = codec_dai_name;
+
+ if (!fsl_asoc_card_is_ac97(priv))
+ priv->dai_link[0].codec_of_node = codec_np;
+ else {
+ u32 idx;
+
+ ret = of_property_read_u32(cpu_np, "cell-index", &idx);
+ if (ret) {
+ dev_err(&pdev->dev,
+ "cannot get CPU index property\n");
+ goto asrc_fail;
+ }
+
+ priv->dai_link[0].codec_name =
+ devm_kasprintf(&pdev->dev, GFP_KERNEL,
+ "ac97-codec.%u",
+ (unsigned int)idx);
+ }
+
priv->dai_link[0].platform_of_node = cpu_np;
priv->dai_link[0].dai_fmt = priv->dai_fmt;
priv->card.num_links = 1;
@@ -543,6 +623,8 @@ static int fsl_asoc_card_probe(struct platform_device *pdev)
priv->dai_link[1].platform_of_node = asrc_np;
priv->dai_link[2].codec_dai_name = codec_dai_name;
priv->dai_link[2].codec_of_node = codec_np;
+ priv->dai_link[2].codec_name =
+ priv->dai_link[0].codec_name;
priv->dai_link[2].cpu_of_node = cpu_np;
priv->dai_link[2].dai_fmt = priv->dai_fmt;
priv->card.num_links = 3;
@@ -578,14 +660,15 @@ static int fsl_asoc_card_probe(struct platform_device *pdev)
asrc_fail:
of_node_put(asrc_np);
-fail:
of_node_put(codec_np);
+fail:
of_node_put(cpu_np);
return ret;
}
static const struct of_device_id fsl_asoc_card_dt_ids[] = {
+ { .compatible = "fsl,imx-audio-ac97", },
{ .compatible = "fsl,imx-audio-cs42888", },
{ .compatible = "fsl,imx-audio-sgtl5000", },
{ .compatible = "fsl,imx-audio-wm8962", },
--
2.5.0
More information about the Alsa-devel
mailing list