[alsa-devel] [PATCH 6/9] drm: bridge/dw_hdmi: adjust pixel clock values in N calculation

[Doug Anderson]

Hi,

On Sat, Sep 5, 2015 at 7:01 AM, Russell King - ARM Linux
<linux at arm.linux.org.uk> wrote:
>> If you know the answer, just tell me.  If you're talking about 74.25
>> vs. 32 kHz it is further evidence of what I'm saying.  Note that
>> picking only one of the two listed CTS values again puts you in a
>> worse position for regenerating the proper audio clock then just using
>> the default N=4096.
>
> No it doesn't.
>
> 74.25MHz/1.001 * 4096 / (128 * 32000) = 74175 (rounded down)
>
> Now do the calcuation.
>
> (74.25MHz/1.001) / 74175 * 4096 = 4096045.511 => 32000.35556Hz
>         => error of 0.001111%
>
> Now for the calcuation using the proscribed figures.
>
> (74.25MHz/1.001) / 210937 * 11648 = 4096009.709 => 32000.07585Hz
>         => error of 0.000237%
>

Why would you round down???  Round to the closest.

(74250000 / 1.001 * 4096)  / (128 * 32000.)
=> 74175.82417582418
=> 74176

(74250000 / 1.001) / 74176 * 4096 / 128
=> 31999.924148327947

That's actually the same error as yours: 0.000237%

You're right.  Yours isn't worse, but it's also not any better.