[alsa-devel] [PATCH 2/4] ASoC: Intel: Skylake: Verify the status bit before handling interrupt

[Vinod Koul]

From: Jeeja KP <jeeja.kp at intel.com>

Like we have in legacy mode HDA driver, we need to check the
status bit and handle interrupt only when it is not zero or all
bits set.  We typically see the status as all 1's when controller
resumes from suspend, So add the check here as well and don't
handle for these cases.

Signed-off-by: Jeeja KP <jeeja.kp at intel.com>
Signed-off-by: Vinod Koul <vinod.koul at intel.com>
---
 sound/soc/intel/skylake/skl-sst-dsp.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/sound/soc/intel/skylake/skl-sst-dsp.c b/sound/soc/intel/skylake/skl-sst-dsp.c
index 194bd0036454..1bfb7f63b572 100644
--- a/sound/soc/intel/skylake/skl-sst-dsp.c
+++ b/sound/soc/intel/skylake/skl-sst-dsp.c
@@ -262,6 +262,11 @@ irqreturn_t skl_dsp_sst_interrupt(int irq, void *dev_id)
 	val = sst_dsp_shim_read_unlocked(ctx, SKL_ADSP_REG_ADSPIS);
 	ctx->intr_status = val;
 
+	if (val == 0xffffffff) {
+		spin_unlock(&ctx->spinlock);
+		return IRQ_NONE;
+	}
+
 	if (val & SKL_ADSPIS_IPC) {
 		skl_ipc_int_disable(ctx);
 		result = IRQ_WAKE_THREAD;
-- 
2.4.3