[alsa-devel] [PATCH 1/2] ASoC: rockchip: i2s: add 8 channels capture and lrck-mode support
Caleb Crome
caleb at crome.org
Wed Oct 7 15:04:51 CEST 2015
Hi sugar,
Can the rockchip support more than 8 channels? Ideally, we would like to capture 16 channels and playback 16 channels simultaneously.
Thanks, Caleb
Sent from my iPhone
> On Oct 7, 2015, at 1:01 AM, sugar <sugar.zhang at rock-chips.com> wrote:
>
> Sorry for late reply, we were in the National Day Holiday.
>
>> 在 10/1/2015 02:46, Mark Brown 写道:
>>> On Mon, Sep 28, 2015 at 04:16:12PM +0800, sugar wrote:
>>> 在 9/24/2015 00:24, Mark Brown 写道:
>>
>>>> My initial thought here is that the machine driver should be responsible
>>>> for setting this and then the DAI driver should check to see if
>>>> symmetric_rates are in use and configure itself appropriately. Is there
>>>> a reason why this won't work here?
>>
>>> It's for i2s ip configuration, in the most situation, there is no need
>>> to use this property, except one case:
>>
>>> In order to save gpio pins for other function use, we may use single
>>> lrck(tx or rx) pin. of course, it depends on product design. when in i2s
>>> slave mode, we need to configure this to share lrck with tx/rx inside i2s
>>> logic.
>>
>>> symmetric_rates flag works fine on rockchip platform, but it can't cover the
>>> above case.
>>
>>> Do you have any suggestion about this or maybe there is no need to upstream
>>> this special part?
>>
>> What makes you say that the symmetric_rates flag can't be used to cover
>> this case? What you describe above is hte normal reason for needing to
>> enforce symmetric_rates. The driver should be able to check if the flag
>> has been set just as well as the core is.
>
> Got it, How about the following modify?
>
> if (dai->symmetric_rates)
> regmap_update_bits(i2s->regmap, I2S_CKR,
> I2S_CKR_TRCM_MASK,
> I2S_CKR_TRCM(val));
>
>
> _______________________________________________
> Alsa-devel mailing list
> Alsa-devel at alsa-project.org
> http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
More information about the Alsa-devel
mailing list