[alsa-devel] [PATCH 6/7] ASoC: Intel: Skylake: Clear stream registers before setting up stream

Vinod Koul vinod.koul at intel.com
Mon Nov 23 17:56:28 CET 2015


From: Jeeja KP <jeeja.kp at intel.com>

This patch adds clean up routine to clear the stream registers and
calls this routine before setting up stream registers.

Signed-off-by: Jeeja KP <jeeja.kp at intel.com>
Signed-off-by: Vinod Koul <vinod.koul at intel.com>
---
 sound/soc/intel/skylake/skl-sst-cldma.c | 39 ++++++++++++++++++++-------------
 1 file changed, 24 insertions(+), 15 deletions(-)

diff --git a/sound/soc/intel/skylake/skl-sst-cldma.c b/sound/soc/intel/skylake/skl-sst-cldma.c
index faaa852ed015..b845c3acd3eb 100644
--- a/sound/soc/intel/skylake/skl-sst-cldma.c
+++ b/sound/soc/intel/skylake/skl-sst-cldma.c
@@ -60,6 +60,28 @@ static void skl_cldma_stream_run(struct sst_dsp  *ctx, bool enable)
 		dev_err(ctx->dev, "Failed to set Run bit=%d enable=%d\n", val, enable);
 }
 
+static void skl_cldma_stream_clear(struct sst_dsp  *ctx)
+{
+	/* make sure Run bit is cleared before setting stream register */
+	skl_cldma_stream_run(ctx, 0);
+
+	sst_dsp_shim_update_bits(ctx, SKL_ADSP_REG_CL_SD_CTL,
+				CL_SD_CTL_IOCE_MASK, CL_SD_CTL_IOCE(0));
+	sst_dsp_shim_update_bits(ctx, SKL_ADSP_REG_CL_SD_CTL,
+				CL_SD_CTL_FEIE_MASK, CL_SD_CTL_FEIE(0));
+	sst_dsp_shim_update_bits(ctx, SKL_ADSP_REG_CL_SD_CTL,
+				CL_SD_CTL_DEIE_MASK, CL_SD_CTL_DEIE(0));
+	sst_dsp_shim_update_bits(ctx, SKL_ADSP_REG_CL_SD_CTL,
+				CL_SD_CTL_STRM_MASK, CL_SD_CTL_STRM(0));
+
+	sst_dsp_shim_write(ctx, SKL_ADSP_REG_CL_SD_BDLPL, CL_SD_BDLPLBA(0));
+	sst_dsp_shim_write(ctx, SKL_ADSP_REG_CL_SD_BDLPU, 0);
+
+	sst_dsp_shim_write(ctx, SKL_ADSP_REG_CL_SD_CBL, 0);
+	sst_dsp_shim_write(ctx, SKL_ADSP_REG_CL_SD_LVI, 0);
+}
+
+
 /* Code loader helper APIs */
 static void skl_cldma_setup_bdle(struct sst_dsp *ctx,
 		struct snd_dma_buffer *dmab_data,
@@ -95,6 +117,7 @@ static void skl_cldma_setup_controller(struct sst_dsp  *ctx,
 		struct snd_dma_buffer *dmab_bdl, unsigned int max_size,
 		u32 count)
 {
+	skl_cldma_stream_clear(ctx);
 	sst_dsp_shim_write(ctx, SKL_ADSP_REG_CL_SD_BDLPL,
 			CL_SD_BDLPLBA(dmab_bdl->addr));
 	sst_dsp_shim_write(ctx, SKL_ADSP_REG_CL_SD_BDLPU,
@@ -137,21 +160,7 @@ static void skl_cldma_cleanup_spb(struct sst_dsp  *ctx)
 static void skl_cldma_cleanup(struct sst_dsp  *ctx)
 {
 	skl_cldma_cleanup_spb(ctx);
-
-	sst_dsp_shim_update_bits(ctx, SKL_ADSP_REG_CL_SD_CTL,
-				CL_SD_CTL_IOCE_MASK, CL_SD_CTL_IOCE(0));
-	sst_dsp_shim_update_bits(ctx, SKL_ADSP_REG_CL_SD_CTL,
-				CL_SD_CTL_FEIE_MASK, CL_SD_CTL_FEIE(0));
-	sst_dsp_shim_update_bits(ctx, SKL_ADSP_REG_CL_SD_CTL,
-				CL_SD_CTL_DEIE_MASK, CL_SD_CTL_DEIE(0));
-	sst_dsp_shim_update_bits(ctx, SKL_ADSP_REG_CL_SD_CTL,
-				CL_SD_CTL_STRM_MASK, CL_SD_CTL_STRM(0));
-
-	sst_dsp_shim_write(ctx, SKL_ADSP_REG_CL_SD_BDLPL, CL_SD_BDLPLBA(0));
-	sst_dsp_shim_write(ctx, SKL_ADSP_REG_CL_SD_BDLPU, 0);
-
-	sst_dsp_shim_write(ctx, SKL_ADSP_REG_CL_SD_CBL, 0);
-	sst_dsp_shim_write(ctx, SKL_ADSP_REG_CL_SD_LVI, 0);
+	skl_cldma_stream_clear(ctx);
 
 	if (&ctx->cl_dev.dmab_data)
 		ctx->dsp_ops.free_dma_buf(ctx->dev, &ctx->cl_dev.dmab_data);
-- 
1.9.1



More information about the Alsa-devel mailing list