[alsa-devel] [PATCH 1/4] ASoC: sun4i-codec: Add support for PA gpio pin
Hans de Goede
hdegoede at redhat.com
Fri Nov 20 14:47:10 CET 2015
Add support for PA gpio pin for controlling an external amplifier as used
on some Allwinner boards.
Signed-off-by: Hans de Goede <hdegoede at redhat.com>
---
.../devicetree/bindings/sound/sun4i-codec.txt | 3 +++
sound/soc/sunxi/sun4i-codec.c | 25 ++++++++++++++--------
2 files changed, 19 insertions(+), 9 deletions(-)
diff --git a/Documentation/devicetree/bindings/sound/sun4i-codec.txt b/Documentation/devicetree/bindings/sound/sun4i-codec.txt
index c92966b..974babe 100644
--- a/Documentation/devicetree/bindings/sound/sun4i-codec.txt
+++ b/Documentation/devicetree/bindings/sound/sun4i-codec.txt
@@ -14,6 +14,9 @@ Required properties:
- "apb": the parent APB clock for this controller
- "codec": the parent module clock
+Optional properties:
+- pa-gpios: gpio to enable external amplifier
+
Example:
codec: codec at 01c22c00 {
#sound-dai-cells = <0>;
diff --git a/sound/soc/sunxi/sun4i-codec.c b/sound/soc/sunxi/sun4i-codec.c
index bcbf4da..2aca9cd 100644
--- a/sound/soc/sunxi/sun4i-codec.c
+++ b/sound/soc/sunxi/sun4i-codec.c
@@ -27,6 +27,7 @@
#include <linux/of_address.h>
#include <linux/clk.h>
#include <linux/regmap.h>
+#include <linux/gpio/consumer.h>
#include <sound/core.h>
#include <sound/pcm.h>
@@ -101,16 +102,15 @@ struct sun4i_codec {
struct regmap *regmap;
struct clk *clk_apb;
struct clk *clk_module;
+ struct gpio_desc *gpio_pa;
struct snd_dmaengine_dai_dma_data playback_dma_data;
};
static void sun4i_codec_start_playback(struct sun4i_codec *scodec)
{
- /*
- * FIXME: according to the BSP, we might need to drive a PA
- * GPIO high here on some boards
- */
+ if (scodec->gpio_pa)
+ gpiod_set_value_cansleep(scodec->gpio_pa, 1);
/* Flush TX FIFO */
regmap_update_bits(scodec->regmap, SUN4I_CODEC_DAC_FIFOC,
@@ -125,15 +125,13 @@ static void sun4i_codec_start_playback(struct sun4i_codec *scodec)
static void sun4i_codec_stop_playback(struct sun4i_codec *scodec)
{
- /*
- * FIXME: according to the BSP, we might need to drive a PA
- * GPIO low here on some boards
- */
-
/* Disable DAC DRQ */
regmap_update_bits(scodec->regmap, SUN4I_CODEC_DAC_FIFOC,
BIT(SUN4I_CODEC_DAC_FIFOC_DAC_DRQ_EN),
0);
+
+ if (scodec->gpio_pa)
+ gpiod_set_value_cansleep(scodec->gpio_pa, 0);
}
static int sun4i_codec_trigger(struct snd_pcm_substream *substream, int cmd,
@@ -633,6 +631,15 @@ static int sun4i_codec_probe(struct platform_device *pdev)
return -EINVAL;
}
+ scodec->gpio_pa = devm_gpiod_get_optional(&pdev->dev, "pa",
+ GPIOD_OUT_HIGH);
+ if (IS_ERR(scodec->gpio_pa)) {
+ ret = PTR_ERR(scodec->gpio_pa);
+ if (ret != -EPROBE_DEFER)
+ dev_err(&pdev->dev, "Failed to get pa gpio: %d\n", ret);
+ return ret;
+ }
+
/* DMA configuration for TX FIFO */
scodec->playback_dma_data.addr = res->start + SUN4I_CODEC_DAC_TXDATA;
scodec->playback_dma_data.maxburst = 4;
--
2.5.0
More information about the Alsa-devel
mailing list