[alsa-devel] [PATCH] ASoC: ak4613: add single-end optional property for IN/OUT pins
Kuninori Morimoto
kuninori.morimoto.gx at renesas.com
Fri Nov 13 06:12:09 CET 2015
From: Kuninori Morimoto <kuninori.morimoto.gx at renesas.com>
ak4613 IN/OUT pin can be selected as differential/single-end.
Differential is default, because it is register default settings.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx at renesas.com>
---
Documentation/devicetree/bindings/sound/ak4613.txt | 10 ++++++++
sound/soc/codecs/ak4613.c | 29 ++++++++++++++++++++++
2 files changed, 39 insertions(+)
diff --git a/Documentation/devicetree/bindings/sound/ak4613.txt b/Documentation/devicetree/bindings/sound/ak4613.txt
index 15a9195..392b5b5 100644
--- a/Documentation/devicetree/bindings/sound/ak4613.txt
+++ b/Documentation/devicetree/bindings/sound/ak4613.txt
@@ -7,6 +7,16 @@ Required properties:
- compatible : "asahi-kasei,ak4613"
- reg : The chip select number on the I2C bus
+Optional properties:
+- in1-single-end : Boolean. Indicate input / output pins are single-ended.
+- in2-single-end rather than differential.
+- out1-single-end
+- out2-single-end
+- out3-single-end
+- out4-single-end
+- out5-single-end
+- out6-single-end
+
Example:
&i2c {
diff --git a/sound/soc/codecs/ak4613.c b/sound/soc/codecs/ak4613.c
index 07a2664..7dc01fe 100644
--- a/sound/soc/codecs/ak4613.c
+++ b/sound/soc/codecs/ak4613.c
@@ -79,6 +79,8 @@ struct ak4613_priv {
unsigned int fmt;
u8 fmt_ctrl;
+ u8 oc;
+ u8 ic;
int cnt;
};
@@ -343,6 +345,9 @@ static int ak4613_dai_hw_params(struct snd_pcm_substream *substream,
snd_soc_update_bits(codec, CTRL1, FMT_MASK, fmt_ctrl);
snd_soc_write(codec, CTRL2, ctrl2);
+ snd_soc_write(codec, ICTRL, priv->ic);
+ snd_soc_write(codec, OCTRL, priv->oc);
+
hw_params_end:
if (ret < 0)
dev_warn(dev, "unsupported data width/format combination\n");
@@ -431,6 +436,28 @@ static struct snd_soc_codec_driver soc_codec_dev_ak4613 = {
.num_dapm_routes = ARRAY_SIZE(ak4613_intercon),
};
+static void ak4613_parse_of(struct ak4613_priv *priv,
+ struct device *dev)
+{
+ struct device_node *np = dev->of_node;
+ char prop[32];
+ int i;
+
+ /* Input 1 - 2 */
+ for (i = 0; i < 2; i++) {
+ snprintf(prop, sizeof(prop), "in%d-single-end", i + 1);
+ if (!of_get_property(np, prop, NULL))
+ priv->ic |= 1 << i;
+ }
+
+ /* Output 1 - 6 */
+ for (i = 0; i < 6; i++) {
+ snprintf(prop, sizeof(prop), "out%d-single-end", i + 1);
+ if (!of_get_property(np, prop, NULL))
+ priv->oc |= 1 << i;
+ }
+}
+
static int ak4613_i2c_probe(struct i2c_client *i2c,
const struct i2c_device_id *id)
{
@@ -458,6 +485,8 @@ static int ak4613_i2c_probe(struct i2c_client *i2c,
if (!priv)
return -ENOMEM;
+ ak4613_parse_of(priv, dev);
+
priv->fmt_ctrl = NO_FMT;
priv->cnt = 0;
--
1.9.1
More information about the Alsa-devel
mailing list