[alsa-devel] [PATCH 5/9] ASoC: Intel: Skylake: Reset the DSP when set D3 fails

[Vinod Koul]

From: Jeeja KP <jeeja.kp at intel.com>

Sometimes firmware D3 IPC fails causing firmware to be in invalid
state. To recover we need to reset the DSP and then shut it down,
so don't return on error and continue resetting to recover.

On D0, firmware will be redownloaded and DSP will be back in
clean state

Signed-off-by: Jeeja KP <jeeja.kp at intel.com>
Signed-off-by: Vinod Koul <vinod.koul at intel.com>
---
 sound/soc/intel/skylake/skl-sst.c | 20 ++++++++++----------
 1 file changed, 10 insertions(+), 10 deletions(-)

diff --git a/sound/soc/intel/skylake/skl-sst.c b/sound/soc/intel/skylake/skl-sst.c
index 36dfc326d1fa..bc6f03c9b27c 100644
--- a/sound/soc/intel/skylake/skl-sst.c
+++ b/sound/soc/intel/skylake/skl-sst.c
@@ -19,6 +19,7 @@
 #include <linux/module.h>
 #include <linux/delay.h>
 #include <linux/device.h>
+#include <linux/err.h>
 #include "../common/sst-dsp.h"
 #include "../common/sst-dsp-priv.h"
 #include "../common/sst-ipc.h"
@@ -177,10 +178,15 @@ static int skl_set_dsp_D3(struct sst_dsp *ctx)
 	dx.core_mask = SKL_DSP_CORE0_MASK;
 	dx.dx_mask = SKL_IPC_D3_MASK;
 	ret = skl_ipc_set_dx(&skl->ipc, SKL_INSTANCE_ID, SKL_BASE_FW_MODULE_ID, &dx);
-	if (ret < 0) {
-		dev_err(ctx->dev, "Failed to set DSP to D3 state\n");
-		return ret;
-	}
+	if (ret < 0)
+		dev_err(ctx->dev,
+			"D3 request to FW failed, continuing reset: %d", ret);
+
+	/* disable Interrupt */
+	ctx->cl_dev.ops.cl_cleanup_controller(ctx);
+	skl_cldma_int_disable(ctx);
+	skl_ipc_op_int_disable(ctx);
+	skl_ipc_int_disable(ctx);
 
 	ret = skl_dsp_disable_core(ctx);
 	if (ret < 0) {
@@ -189,12 +195,6 @@ static int skl_set_dsp_D3(struct sst_dsp *ctx)
 	}
 	skl_dsp_set_state_locked(ctx, SKL_DSP_RESET);
 
-	/* disable Interrupt */
-	ctx->cl_dev.ops.cl_cleanup_controller(ctx);
-	skl_cldma_int_disable(ctx);
-	skl_ipc_op_int_disable(ctx);
-	skl_ipc_int_disable(ctx);
-
 	return ret;
 }
 
-- 
1.9.1