[alsa-devel] [PATCH] ALSA: bebob: add Digidesign Mbox 2 Pro support
Takashi Iwai
tiwai at suse.de
Sun May 24 17:35:18 CEST 2015
At Sun, 24 May 2015 20:51:45 +0900,
Takashi Sakamoto wrote:
>
> This device is based on DM1000E, and BeBoB version 1 firmware is
> installed.
>
> $ cat /proc/asound/cards
> 0 [Pro ]: BeBoB - Mbox 2 Pro
> DIGIDESIGN Mbox 2 Pro (id:1, rev:1),
> GUID 00a07e0100a90000 at fw1.0, S400
>
> $ cat /proc/asound/Pro/firewire/firmware
> Manufacturer: bridgeCo
> Protocol Ver: 1
> Build Ver: 0
> GUID: 0x00A07E0100A90000
> Model ID: 0x01
> Model Rev: 1
> Firmware Date: 20071031
> Firmware Time: 034402
> Firmware ID: 0xA9
> Firmware Ver: 16777215
> Base Addr: 0x20080000
> Max Size: 1572864
> Loader Date: 20051207
> Loader Time: 205554
>
> With this patch, ALSA BeBoB driver can start packet streaming to/from
> this model, while as a default, internal multiplexer of this model is
> not initialized and generates no sound even if the driver transfers
> any packets with PCM samples. To hear any sounds from this model,
> userspace applications should be developed to set parameters to the
> internal multiplexer. You can see raw information in FFADO website:
> http://subversion.ffado.org/wiki/AvcModels/DigiDesignMboxPro2
>
> Signed-off-by: Takashi Sakamoto <o-takashi at sakamocchi.jp>
Applied, thanks.
Takashi
> ---
> sound/firewire/Kconfig | 1 +
> sound/firewire/bebob/bebob.c | 3 +++
> 2 files changed, 4 insertions(+)
>
> diff --git a/sound/firewire/Kconfig b/sound/firewire/Kconfig
> index ecec547..2a0a9aa 100644
> --- a/sound/firewire/Kconfig
> +++ b/sound/firewire/Kconfig
> @@ -114,6 +114,7 @@ config SND_BEBOB
> * M-Audio FireWire410/AudioPhile/Solo
> * M-Audio Ozonic/NRV10/ProfireLightBridge
> * M-Audio FireWire 1814/ProjectMix IO
> + * Digidesign Mbox 2 Pro
>
> To compile this driver as a module, choose M here: the module
> will be called snd-bebob.
> diff --git a/sound/firewire/bebob/bebob.c b/sound/firewire/bebob/bebob.c
> index 611b7da..e71bd35 100644
> --- a/sound/firewire/bebob/bebob.c
> +++ b/sound/firewire/bebob/bebob.c
> @@ -57,6 +57,7 @@ static DECLARE_BITMAP(devices_used, SNDRV_CARDS);
> #define VEN_FOCUSRITE 0x0000130e
> #define VEN_MAUDIO1 0x00000d6c
> #define VEN_MAUDIO2 0x000007f5
> +#define VEN_DIGIDESIGN 0x00a07e
>
> #define MODEL_FOCUSRITE_SAFFIRE_BOTH 0x00000000
> #define MODEL_MAUDIO_AUDIOPHILE_BOTH 0x00010060
> @@ -433,6 +434,8 @@ static const struct ieee1394_device_id bebob_id_table[] = {
> /* M-Audio ProjectMix */
> SND_BEBOB_DEV_ENTRY(VEN_MAUDIO1, MODEL_MAUDIO_PROJECTMIX,
> &maudio_special_spec),
> + /* Digidesign Mbox 2 Pro */
> + SND_BEBOB_DEV_ENTRY(VEN_DIGIDESIGN, 0x0000a9, &spec_normal),
> /* IDs are unknown but able to be supported */
> /* Apogee, Mini-ME Firewire */
> /* Apogee, Mini-DAC Firewire */
> --
> 2.1.4
>
More information about the Alsa-devel
mailing list