[alsa-devel] [PATCH v3 01/17] mfd: add new driver for Sharp LoCoMo
Lee Jones
lee.jones at linaro.org
Tue May 19 12:38:28 CEST 2015
On Sun, 17 May 2015, Dmitry Eremin-Solenikov wrote:
> LoCoMo is a GA used on Sharp Zaurus SL-5x00. Current driver does has
> several design issues (special bus instead of platform bus, doesn't use
> mfd-core, etc).
>
> Implement 'core' parts of locomo support as an mfd driver.
>
> Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov at gmail.com>
> ---
> drivers/mfd/Kconfig | 10 ++
> drivers/mfd/Makefile | 1 +
> drivers/mfd/locomo.c | 346 +++++++++++++++++++++++++++++++++++++++++++++
> include/linux/mfd/locomo.h | 167 ++++++++++++++++++++++
> 4 files changed, 524 insertions(+)
> create mode 100644 drivers/mfd/locomo.c
> create mode 100644 include/linux/mfd/locomo.h
>
> diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
> index d5ad04d..8c33940 100644
> --- a/drivers/mfd/Kconfig
> +++ b/drivers/mfd/Kconfig
> @@ -1430,6 +1430,16 @@ config MFD_STW481X
> in various ST Microelectronics and ST-Ericsson embedded
> Nomadik series.
>
> +config MFD_LOCOMO
> + bool "Sharp LoCoMo support"
> + depends on ARM
> + select MFD_CORE
> + select IRQ_DOMAIN
> + select REGMAP_MMIO
> + help
> + Support for Sharp LoCoMo Grid Array found in Sharp SL-5x00
> + PDA family.
> +
> menu "Multimedia Capabilities Port drivers"
> depends on ARCH_SA1100
>
> diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
> index 0e5cfeb..6c23b73 100644
> --- a/drivers/mfd/Makefile
> +++ b/drivers/mfd/Makefile
> @@ -181,6 +181,7 @@ obj-$(CONFIG_MFD_HI6421_PMIC) += hi6421-pmic-core.o
> obj-$(CONFIG_MFD_DLN2) += dln2.o
> obj-$(CONFIG_MFD_RT5033) += rt5033.o
> obj-$(CONFIG_MFD_SKY81452) += sky81452.o
> +obj-$(CONFIG_MFD_LOCOMO) += locomo.o
>
> intel-soc-pmic-objs := intel_soc_pmic_core.o intel_soc_pmic_crc.o
> obj-$(CONFIG_INTEL_SOC_PMIC) += intel-soc-pmic.o
> diff --git a/drivers/mfd/locomo.c b/drivers/mfd/locomo.c
> new file mode 100644
> index 0000000..313d12f
> --- /dev/null
> +++ b/drivers/mfd/locomo.c
> @@ -0,0 +1,346 @@
> +/*
> + * Sharp LoCoMo support
> + *
> + * (C) Copyright 2015 Dmitry Eremin-Solenikov
> + *
> + * Based on old driver at arch/arm/common/locomo.c
> + *
> + * (C) Copyright 2004 John Lenz
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + *
> + * This file contains all generic LoCoMo support.
> + *
> + * All initialization functions provided here are intended to be called
> + * from machine specific code with proper arguments when required.
> + */
> +
> +#include <linux/delay.h>
> +#include <linux/gpio.h>
> +#include <linux/io.h>
> +#include <linux/irq.h>
> +#include <linux/irqdomain.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/regmap.h>
> +#include <linux/slab.h>
> +#include <linux/platform_device.h>
> +#include <linux/mfd/core.h>
> +#include <linux/mfd/locomo.h>
Alphabetical please.
> +/* LoCoMo Interrupts */
> +#define IRQ_LOCOMO_KEY 0
> +#define IRQ_LOCOMO_GPIO 1
> +#define IRQ_LOCOMO_LT 2
> +#define IRQ_LOCOMO_SPI 3
> +
> +#define LOCOMO_NR_IRQS 4
> +
> +/* the following is the overall data for the locomo chip */
Capitalisation, to be consistent with the other comments.
> +struct locomo {
> + struct device *dev;
> + unsigned int irq;
> + spinlock_t lock;
> + struct irq_domain *domain;
> + struct regmap *regmap;
> +};
> +
> +static struct resource locomo_kbd_resources[] = {
> + DEFINE_RES_IRQ(IRQ_LOCOMO_KEY),
> +};
> +
> +static struct resource locomo_gpio_resources[] = {
> + DEFINE_RES_IRQ(IRQ_LOCOMO_GPIO),
> +};
> +
> +/* Filled in locomo_probe() function, will be kmemduped by platform core */
> +static struct locomo_gpio_platform_data locomo_gpio_pdata;
> +
> +static struct resource locomo_lt_resources[] = {
> + DEFINE_RES_IRQ(IRQ_LOCOMO_LT),
> +};
> +
> +static struct resource locomo_spi_resources[] = {
> + DEFINE_RES_IRQ(IRQ_LOCOMO_SPI),
> +};
> +
> +/* Filled in locomo_probe() function, will be kmemduped by platform core */
> +static struct locomo_lcd_platform_data locomo_lcd_pdata;
> +
> +static struct mfd_cell locomo_cells[] = {
> + {
> + .name = "locomo-kbd",
> + .resources = locomo_kbd_resources,
> + .num_resources = ARRAY_SIZE(locomo_kbd_resources),
> + },
> + {
> + .name = "locomo-gpio",
> + .resources = locomo_gpio_resources,
> + .num_resources = ARRAY_SIZE(locomo_gpio_resources),
> + .platform_data = &locomo_gpio_pdata,
> + .pdata_size = sizeof(locomo_gpio_pdata),
> + },
> + {
> + .name = "locomo-lt", /* Long time timer */
> + .resources = locomo_lt_resources,
> + .num_resources = ARRAY_SIZE(locomo_lt_resources),
> + },
> + {
> + .name = "locomo-spi",
> + .resources = locomo_spi_resources,
> + .num_resources = ARRAY_SIZE(locomo_spi_resources),
> + },
> + {
> + .name = "locomo-led",
> + },
> + {
> + .name = "locomo-backlight",
> + },
Are these to be filled in?
If not, make them one liners and put them at the bottom.
> + {
> + .name = "locomo-lcd",
> + .platform_data = &locomo_lcd_pdata,
> + .pdata_size = sizeof(locomo_lcd_pdata),
> + },
> + {
> + .name = "locomo-i2c",
> + },
> +};
> +
> +/*
> + * IRQ support
> + *
> + * ICR reg contains IRQ status at bits 9-12, IRQ mask at bits 4-7.
> + * Thus 0xf00 selects all triggered IRQ sources, and decrementing
> + * ffs result by 9 will get hardware IRQ number.
> + */
> +static void locomo_handler(unsigned int irq, struct irq_desc *desc)
> +{
> + struct locomo *ldev = irq_get_handler_data(irq);
> + struct irq_chip *irqchip = irq_desc_get_chip(desc);
> + unsigned int req;
> +
> + chained_irq_enter(irqchip, desc);
> +
> + /* Check why this interrupt was generated */
> + while (1) {
> + regmap_read(ldev->regmap, LOCOMO_ICR, &req);
> + req &= 0x0f00;
I see the comment above, which is good, but it would be better to
define these values (0x0f00 and 9).
> + if (!req)
> + break;
> +
> + irq = ffs(req) - 9;
> + generic_handle_irq(irq_find_mapping(ldev->domain, irq));
> + }
> +
> + chained_irq_exit(irqchip, desc);
> +}
> +
> +static void locomo_mask_irq(struct irq_data *d)
> +{
> + struct locomo *ldev = irq_data_get_irq_chip_data(d);
> + unsigned int mask = 0x0010 << d->hwirq;
This also needs defining.
Why not
BIT(d->hwirq + 1)
> + regmap_update_bits(ldev->regmap, LOCOMO_ICR, mask, 0);
> +}
> +
> +static void locomo_unmask_irq(struct irq_data *d)
> +{
> + struct locomo *ldev = irq_data_get_irq_chip_data(d);
> + unsigned int mask = 0x0010 << d->hwirq;
As above.
> + regmap_update_bits(ldev->regmap, LOCOMO_ICR, mask, mask);
> +}
> +
> +static struct irq_chip locomo_chip = {
> + .name = "locomo",
> + .irq_mask = locomo_mask_irq,
> + .irq_unmask = locomo_unmask_irq,
> +};
> +
> +static int locomo_irq_map(struct irq_domain *d, unsigned int virq,
> + irq_hw_number_t hwirq)
> +{
> + struct locomo *locomo = d->host_data;
> +
> + irq_set_chip_data(virq, locomo);
> + irq_set_chip_and_handler(virq, &locomo_chip, handle_level_irq);
> + set_irq_flags(virq, IRQF_VALID);
> +
> + return 0;
> +}
> +
> +static void locomo_irq_unmap(struct irq_domain *d, unsigned int virq)
> +{
> + set_irq_flags(virq, 0);
> + irq_set_chip_and_handler(virq, NULL, NULL);
> + irq_set_chip_data(virq, NULL);
> +}
> +
> +static struct irq_domain_ops locomo_irq_ops = {
> + .map = locomo_irq_map,
> + .unmap = locomo_irq_unmap,
> + .xlate = irq_domain_xlate_onecell,
> +};
> +
> +static int locomo_setup_irq(struct locomo *ldev)
> +{
> + ldev->domain = irq_domain_add_simple(NULL, LOCOMO_NR_IRQS, 0,
> + &locomo_irq_ops, ldev);
Can you line-up with the '(' please?
> + if (!ldev->domain)
> + return -ENOMEM;
> +
> + /*
> + * Install handler for IRQ_LOCOMO_HW.
> + */
> + irq_set_irq_type(ldev->irq, IRQ_TYPE_EDGE_FALLING);
> + irq_set_handler_data(ldev->irq, ldev);
> + irq_set_chained_handler(ldev->irq, locomo_handler);
> +
> + return 0;
> +}
> +
> +#ifdef CONFIG_PM_SLEEP
> +static int locomo_suspend(struct device *dev)
> +{
> + struct locomo *ldev = dev_get_drvdata(dev);
> +
> + /* audio */
Audio
> + regmap_write(ldev->regmap, LOCOMO_PAIF, 0x00);
> +
> + /*
> + * Original code disabled the clock depending on leds settings
> + * However we disable leds before suspend, thus it's safe
> + * to just assume this setting.
> + */
> + /* CLK32 off */
> + regmap_write(ldev->regmap, LOCOMO_C32K, 0x00);
> +
> + /* 22MHz/24MHz clock off */
> + regmap_write(ldev->regmap, LOCOMO_ACC, 0x00);
> +
> + return 0;
> +}
> +
> +static int locomo_resume(struct device *dev)
> +{
> + struct locomo *ldev = dev_get_drvdata(dev);
> +
> + regmap_write(ldev->regmap, LOCOMO_C32K, 0x00);
> +
> + return 0;
> +}
> +#endif
> +
> +static SIMPLE_DEV_PM_OPS(locomo_pm, locomo_suspend, locomo_resume);
> +
> +static const struct regmap_config locomo_regmap_config = {
> + .name = "LoCoMo",
> + .reg_bits = 8,
> + .reg_stride = 4,
> + .val_bits = 16,
> + .cache_type = REGCACHE_NONE,
> + .max_register = 0xec,
> +};
> +
> +static int locomo_probe(struct platform_device *pdev)
> +{
> + struct locomo_platform_data *pdata = dev_get_platdata(&pdev->dev);
> + struct resource *res;
> + void __iomem *base;
> + struct locomo *ldev;
> + unsigned int rev;
> + int ret;
> +
> + ldev = devm_kzalloc(&pdev->dev, sizeof(*ldev), GFP_KERNEL);
> + if (!ldev)
> + return -ENOMEM;
> +
> + spin_lock_init(&ldev->lock);
> + ldev->dev = &pdev->dev;
> +
> + ldev->irq = platform_get_irq(pdev, 0);
> + if (ldev->irq < 0)
> + return ldev->irq;
> +
> + res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> + base = devm_ioremap_resource(&pdev->dev, res);
> + if (IS_ERR(base))
> + return PTR_ERR(base);
> +
> + ldev->regmap = devm_regmap_init_mmio(&pdev->dev, base,
> + &locomo_regmap_config);
> + if (IS_ERR(ldev->regmap))
> + return PTR_ERR(ldev->regmap);
> +
> + if (pdata) {
> + locomo_gpio_pdata.gpio_base = pdata->gpio_base;
> + locomo_lcd_pdata.comadj = pdata->comadj;
> + } else {
> + locomo_gpio_pdata.gpio_base = -1;
> + locomo_lcd_pdata.comadj = 128;
> + }
> +
> + platform_set_drvdata(pdev, ldev);
> +
> + regmap_read(ldev->regmap, LOCOMO_VER, &rev);
> + dev_info(&pdev->dev, "LoCoMo Chip: %04x\n", rev);
> +
> + /* Clear IRQ status and mask */
> + regmap_write(ldev->regmap, LOCOMO_ICR, 0);
> +
> + /* Longtime timer */
> + regmap_write(ldev->regmap, LOCOMO_LTINT, 0);
> +
> + ret = locomo_setup_irq(ldev);
> + if (ret)
> + return ret;
> +
> + ret = mfd_add_devices(&pdev->dev, pdev->id,
> + locomo_cells, ARRAY_SIZE(locomo_cells),
> + res, -1, ldev->domain);
> + if (ret)
> + goto err;
> +
> + return 0;
> +
> +err:
> + irq_set_chained_handler(ldev->irq, NULL);
> + irq_set_handler_data(ldev->irq, NULL);
> +
> + irq_domain_remove(ldev->domain);
> +
> + return ret;
> +}
> +
> +static int locomo_remove(struct platform_device *dev)
> +{
> + struct locomo *ldev = platform_get_drvdata(dev);
> +
> + mfd_remove_devices(&dev->dev);
> +
> + irq_set_chained_handler(ldev->irq, NULL);
> + irq_set_handler_data(ldev->irq, NULL);
> +
> + irq_domain_remove(ldev->domain);
> +
> + return 0;
> +}
> +
> +static struct platform_driver locomo_device_driver = {
> + .probe = locomo_probe,
> + .remove = locomo_remove,
> + .driver = {
> + .name = "locomo",
> + .pm = &locomo_pm,
> + },
> +};
> +
> +module_platform_driver(locomo_device_driver);
> +
> +MODULE_DESCRIPTION("Sharp LoCoMo core driver");
> +MODULE_LICENSE("GPL v2");
> +MODULE_AUTHOR("John Lenz <lenz at cs.wisc.edu>");
> +MODULE_ALIAS("platform:locomo");
> diff --git a/include/linux/mfd/locomo.h b/include/linux/mfd/locomo.h
> new file mode 100644
> index 0000000..bbbce37
> --- /dev/null
> +++ b/include/linux/mfd/locomo.h
> @@ -0,0 +1,167 @@
> +/*
> + * This file contains the definitions for the LoCoMo G/A Chip
> + *
> + * (C) Copyright 2015 Dmitry Eremin-Solenikov
> + * (C) Copyright 2004 John Lenz
> + *
> + * May be copied or modified under the terms of the GNU General Public
> + * License. See linux/COPYING for more information.
> + *
> + * Based on sa1111.h
> + */
> +
> +#ifndef _ASM_ARCH_LOCOMO
> +#define _ASM_ARCH_LOCOMO
> +
> +/* LOCOMO chip version */
> +#define LOCOMO_VER 0x00
> +
> +/* Pin status */
> +#define LOCOMO_ST 0x04
> +
> +/* Pin status */
> +#define LOCOMO_C32K 0x08
> +
> +/* Interrupt controller */
> +#define LOCOMO_ICR 0x0C
> +
> +/* Touch panel controller */
> +#define LOCOMO_ASD 0x20 /* AD start delay */
> +#define LOCOMO_HSD 0x28 /* HSYS delay */
> +#define LOCOMO_HSC 0x2c /* HSYS period */
> +#define LOCOMO_TADC 0x30 /* tablet ADC clock */
> +
> +/* Backlight controller: TFT signal */
> +#define LOCOMO_TC 0x38 /* TFT control signal */
> +#define LOCOMO_CPSD 0x3c /* CPS delay */
> +
> +/* Keyboard controller */
> +#define LOCOMO_KIB 0x40 /* KIB level */
> +#define LOCOMO_KSC 0x44 /* KSTRB control */
> +#define LOCOMO_KCMD 0x48 /* KSTRB command */
> +#define LOCOMO_KIC 0x4c /* Key interrupt */
> +
> +/* Audio clock */
> +#define LOCOMO_ACC 0x54 /* Audio clock */
> +#define LOCOMO_ACC_XON 0x80
> +#define LOCOMO_ACC_XEN 0x40
> +#define LOCOMO_ACC_XSEL0 0x00
> +#define LOCOMO_ACC_XSEL1 0x20
> +#define LOCOMO_ACC_MCLKEN 0x10
> +#define LOCOMO_ACC_64FSEN 0x08
> +#define LOCOMO_ACC_CLKSEL000 0x00 /* mclk 2 */
> +#define LOCOMO_ACC_CLKSEL001 0x01 /* mclk 3 */
> +#define LOCOMO_ACC_CLKSEL010 0x02 /* mclk 4 */
> +#define LOCOMO_ACC_CLKSEL011 0x03 /* mclk 6 */
> +#define LOCOMO_ACC_CLKSEL100 0x04 /* mclk 8 */
> +#define LOCOMO_ACC_CLKSEL101 0x05 /* mclk 12 */
> +
> +/* SPI interface */
> +#define LOCOMO_SPIMD 0x60 /* SPI mode setting */
> +#define LOCOMO_SPIMD_LOOPBACK BIT(15) /* loopback tx to rx */
> +#define LOCOMO_SPIMD_MSB1ST BIT(14) /* send MSB first */
> +#define LOCOMO_SPIMD_DOSTAT BIT(13) /* transmit line is idle high */
> +#define LOCOMO_SPIMD_TCPOL BIT(11) /* transmit CPOL (maybe affects CPHA) */
> +#define LOCOMO_SPIMD_RCPOL BIT(10) /* receive CPOL (maybe affects CPHA) */
> +#define LOCOMO_SPIMD_TDINV BIT(9) /* invert transmit line */
> +#define LOCOMO_SPIMD_RDINV BIT(8) /* invert receive line */
> +#define LOCOMO_SPIMD_XON BIT(7) /* enable spi controller clock */
> +#define LOCOMO_SPIMD_XEN BIT(6) /* clock bit write enable */
> +#define LOCOMO_SPIMD_XSEL 0x0018 /* clock select */
> +/* xon must be off when enabling xen, wait 300 us before xon -> 1 */
> +#define CLOCK_18MHZ 0 /* 18,432 MHz clock */
> +#define CLOCK_22MHZ 1 /* 22,5792 MHz clock */
> +#define CLOCK_25MHZ 2 /* 24,576 MHz clock */
> +#define LOCOMO_SPIMD_CLKSEL 0x7
> +#define DIV_1 0 /* don't divide clock */
> +#define DIV_2 1 /* divide clock by two */
> +#define DIV_4 2 /* divide clock by four */
> +#define DIV_8 3 /* divide clock by eight */
> +#define DIV_64 4 /* divide clock by 64 */
> +
> +#define LOCOMO_SPICT 0x64 /* SPI mode control */
> +#define LOCOMO_SPICT_CRC16_7_B BIT(15) /* 0: crc16 1: crc7 */
> +#define LOCOMO_SPICT_CRCRX_TX_B BIT(14)
> +#define LOCOMO_SPICT_CRCRESET_B BIT(13)
> +#define LOCOMO_SPICT_CEN BIT(7) /* ?? enable */
> +#define LOCOMO_SPICT_CS BIT(6) /* chip select */
> +#define LOCOMO_SPICT_UNIT16 BIT(5) /* 0: 8 bit, 1: 16 bit*/
> +#define LOCOMO_SPICT_ALIGNEN BIT(2) /* align transfer enable */
> +#define LOCOMO_SPICT_RXWEN BIT(1) /* continuous receive */
> +#define LOCOMO_SPICT_RXUEN BIT(0) /* aligned receive */
> +
> +#define LOCOMO_SPIST 0x68 /* SPI status */
> +#define LOCOMO_SPI_TEND BIT(3) /* Transfer end bit */
> +#define LOCOMO_SPI_REND BIT(2) /* Receive end bit */
> +#define LOCOMO_SPI_RFW BIT(1) /* write buffer bit */
> +#define LOCOMO_SPI_RFR BIT(0) /* read buffer bit */
> +
> +#define LOCOMO_SPIIS 0x70 /* SPI interrupt status */
> +#define LOCOMO_SPIWE 0x74 /* SPI interrupt status write enable */
> +#define LOCOMO_SPIIE 0x78 /* SPI interrupt enable */
> +#define LOCOMO_SPIIR 0x7c /* SPI interrupt request */
> +#define LOCOMO_SPITD 0x80 /* SPI transfer data write */
> +#define LOCOMO_SPIRD 0x84 /* SPI receive data read */
> +#define LOCOMO_SPITS 0x88 /* SPI transfer data shift */
> +#define LOCOMO_SPIRS 0x8C /* SPI receive data shift */
> +
> +/* GPIO */
> +#define LOCOMO_GPD 0x90 /* GPIO direction */
> +#define LOCOMO_GPE 0x94 /* GPIO input enable */
> +#define LOCOMO_GPL 0x98 /* GPIO level */
> +#define LOCOMO_GPO 0x9c /* GPIO out data setting */
> +#define LOCOMO_GRIE 0xa0 /* GPIO rise detection */
> +#define LOCOMO_GFIE 0xa4 /* GPIO fall detection */
> +#define LOCOMO_GIS 0xa8 /* GPIO edge detection status */
> +#define LOCOMO_GWE 0xac /* GPIO status write enable */
> +#define LOCOMO_GIE 0xb0 /* GPIO interrupt enable */
> +#define LOCOMO_GIR 0xb4 /* GPIO interrupt request */
> +
> +/* Front light adjustment controller */
> +#define LOCOMO_ALS 0xc8 /* Adjust light cycle */
> +#define LOCOMO_ALS_EN 0x8000
> +#define LOCOMO_ALD 0xcc /* Adjust light duty */
> +
> +/* PCM audio interface */
> +#define LOCOMO_PAIF 0xd0 /* PCM audio interface */
> +#define LOCOMO_PAIF_SCINV 0x20
> +#define LOCOMO_PAIF_SCEN 0x10
> +#define LOCOMO_PAIF_LRCRST 0x08
> +#define LOCOMO_PAIF_LRCEVE 0x04
> +#define LOCOMO_PAIF_LRCINV 0x02
> +#define LOCOMO_PAIF_LRCEN 0x01
> +
> +/* Long time timer */
> +#define LOCOMO_LTC 0xd8 /* LTC interrupt setting */
> +#define LOCOMO_LTINT 0xdc /* LTC interrupt */
> +
> +/* DAC control signal for LCD (COMADJ ) */
> +#define LOCOMO_DAC 0xe0
> +/* DAC control */
> +#define LOCOMO_DAC_SCLOEB 0x08 /* SCL pin output data */
> +#define LOCOMO_DAC_TEST 0x04 /* Test bit */
> +#define LOCOMO_DAC_SDA 0x02 /* SDA pin level (read-only) */
> +#define LOCOMO_DAC_SDAOEB 0x01 /* SDA pin output data */
> +
> +/* LED controller */
> +#define LOCOMO_LPT0 0xe8
> +#define LOCOMO_LPT1 0xec
> +#define LOCOMO_LPT_TOFH 0x80
> +#define LOCOMO_LPT_TOFL 0x08
> +#define LOCOMO_LPT_TOH(TOH) ((TOH & 0x7) << 4)
> +#define LOCOMO_LPT_TOL(TOL) ((TOL & 0x7))
> +
> +struct locomo_gpio_platform_data {
> + unsigned int gpio_base;
> +};
> +
> +struct locomo_lcd_platform_data {
> + u8 comadj;
> +};
> +
> +struct locomo_platform_data {
> + unsigned int gpio_base;
> + u8 comadj;
> +};
> +
> +#endif
--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
More information about the Alsa-devel
mailing list