[alsa-devel] [PATCH v1 05/13] ASoC: qcom: support bitclk and osrclk per i2s port
Srinivas Kandagatla
srinivas.kandagatla at linaro.org
Fri May 15 10:44:29 CEST 2015
On 15/05/15 06:23, Kenneth Westfield wrote:
> On Wed, May 13, 2015 at 05:00:52AM -0700, Srinivas Kandagatla wrote:
>> This patch adds support to allow bitclk and osrclk per i2s dai port.
>> on APQ8016 there are 4 i2s ports each one has its own bit clks.
>>
>> Without this patch its not possible to support multiple i2s ports in the
>> lpass driver.
>
>> diff --git a/sound/soc/qcom/lpass-cpu.c b/sound/soc/qcom/lpass-cpu.c
>> index 5965667..0d28ea7 100644
>> --- a/sound/soc/qcom/lpass-cpu.c
>> +++ b/sound/soc/qcom/lpass-cpu.c
>> @@ -33,7 +33,7 @@ static int lpass_cpu_daiops_set_sysclk(struct
>> snd_soc_dai *dai, int clk_id,
>> struct lpass_data *drvdata = snd_soc_dai_get_drvdata(dai);
>> int ret;
>>
>> - ret = clk_set_rate(drvdata->mi2s_osr_clk, freq);
>> + ret = clk_set_rate(drvdata->mi2s_osr_clk[dai->driver->id], freq);
>> if (ret)
>> dev_err(dai->dev, "%s() error setting mi2s osrclk to %u:
>> %d\n",
>> __func__, freq, ret);
>
> Audio was broken on the Storm board with this patch series. The issue
> has to do with the mismatch of the clock position in the array (which
> was 0) and the dai->driver->id (which was 4). Basically, the position of
> the bit/osr clocks in their respective arrays need to match the MI2S
> port number, even if the port number doesn't start at the 0 position.
>
> I realize there are multiple ways to address this. The quick solution I
> came up with (to get audio functioning again) was to change the DT clock
> entries for the ipq806x (see changes below for your reference). The
> downside to the way I did this is, that now, there is no error-checking
> for clocks that should be in the DT but aren't there.
>
> Suggestions are welcome on how to best address this issue.
I think all we need to do is populate the correct index in the clk
array. TBH I don't want to change any of ipq806x bindings.
I think the below fix should be the right one, actually I did think of
doing this in v1 when I changed usage of dai->id to dai->driver->id ,
but some how I missed it.
Let me know your thoughts.
-----------------------><---------------------------------------------
diff --git a/sound/soc/qcom/lpass-cpu.c b/sound/soc/qcom/lpass-cpu.c
index 33e28370..64620ce 100644
--- a/sound/soc/qcom/lpass-cpu.c
+++ b/sound/soc/qcom/lpass-cpu.c
@@ -365,7 +365,7 @@ int asoc_qcom_lpass_cpu_platform_probe(struct
platform_device *pdev)
struct device *dev = &pdev->dev;
const struct of_device_id *match;
char clk_name[16];
- int ret, i;
+ int ret, i, dai_id;
dsp_of_node = of_parse_phandle(pdev->dev.of_node, "qcom,adsp", 0);
if (dsp_of_node) {
@@ -412,34 +412,36 @@ int asoc_qcom_lpass_cpu_platform_probe(struct
platform_device *pdev)
variant->init(pdev);
for (i = 0; i < variant->num_dai; i++) {
+ dai_id = variant->dai_driver[i].id;
if (variant->num_dai > 1)
sprintf(clk_name, "mi2s-osr-clk%d", i);
else
sprintf(clk_name, "mi2s-osr-clk");
- drvdata->mi2s_osr_clk[i] = devm_clk_get(&pdev->dev,
+ drvdata->mi2s_osr_clk[dai_id] = devm_clk_get(&pdev->dev,
clk_name);
- if (IS_ERR(drvdata->mi2s_osr_clk[i])) {
+ if (IS_ERR(drvdata->mi2s_osr_clk[dai_id])) {
dev_err(&pdev->dev,
"%s() error getting mi2s-osr-clk: %ld\n",
__func__,
- PTR_ERR(drvdata->mi2s_osr_clk[i]));
+ PTR_ERR(drvdata->mi2s_osr_clk[dai_id]));
}
}
for (i = 0; i < variant->num_dai; i++) {
+ dai_id = variant->dai_driver[i].id;
if (variant->num_dai > 1)
sprintf(clk_name, "mi2s-bit-clk%d", i);
else
sprintf(clk_name, "mi2s-bit-clk");
- drvdata->mi2s_bit_clk[i] = devm_clk_get(&pdev->dev,
clk_name);
- if (IS_ERR(drvdata->mi2s_bit_clk[i])) {
+ drvdata->mi2s_bit_clk[dai_id] = devm_clk_get(&pdev->dev,
clk_name);
+ if (IS_ERR(drvdata->mi2s_bit_clk[dai_id])) {
dev_err(&pdev->dev,
"%s() error getting mi2s-bit-clk: %ld\n",
__func__,
PTR_ERR(drvdata->mi2s_bit_clk[i]));
- return PTR_ERR(drvdata->mi2s_bit_clk[i]);
+ return PTR_ERR(drvdata->mi2s_bit_clk[dai_id]);
}
}
-----------------------><---------------------------------------------
--srini
>
> -----------------------><---------------------------------------------
> diff --git a/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.txt b/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.txt
> index 21c6483..2684a4f 100644
> --- a/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.txt
> +++ b/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.txt
> @@ -8,8 +8,8 @@ Required properties:
> - clocks : Must contain an entry for each entry in clock-names.
> - clock-names : A list which must include the following entries:
> * "ahbix-clk"
> - * "mi2s-osr-clk"
> - * "mi2s-bit-clk"
> + * "mi2s-osr-clk4"
> + * "mi2s-bit-clk4"
> : required clocks for "qcom,lpass-cpu-apq8016"
> * "ahbix-clk"
> * "mi2s-bit-clk0"
> @@ -42,7 +42,7 @@ Example:
> lpass at 28100000 {
> compatible = "qcom,lpass-cpu";
> clocks = <&lcc AHBIX_CLK>, <&lcc MI2S_OSR_CLK>, <&lcc MI2S_BIT_CLK>;
> - clock-names = "ahbix-clk", "mi2s-osr-clk", "mi2s-bit-clk";
> + clock-names = "ahbix-clk", "mi2s-osr-clk4", "mi2s-bit-clk4";
> interrupts = <0 85 1>;
> interrupt-names = "lpass-irq-lpaif";
> pinctrl-names = "default", "idle";
> diff --git a/arch/arm/boot/dts/qcom-ipq8064.dtsi b/arch/arm/boot/dts/qcom-ipq8064.dtsi
> index 5a13366..090984f 100644
> --- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
> +++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
> @@ -189,8 +189,8 @@
> <&lcc MI2S_OSR_CLK>,
> <&lcc MI2S_BIT_CLK>;
> clock-names = "ahbix-clk",
> - "mi2s-osr-clk",
> - "mi2s-bit-clk";
> + "mi2s-osr-clk4",
> + "mi2s-bit-clk4";
> interrupts = <0 85 1>;
> interrupt-names = "lpass-irq-lpaif";
> reg = <0x28100000 0x10000>;
> diff --git a/sound/soc/qcom/lpass-cpu.c b/sound/soc/qcom/lpass-cpu.c
> index 5053629..7b66e52 100644
> --- a/sound/soc/qcom/lpass-cpu.c
> +++ b/sound/soc/qcom/lpass-cpu.c
> @@ -411,11 +411,8 @@ int asoc_qcom_lpass_cpu_platform_probe(struct platform_device *pdev)
> if (variant->init)
> variant->init(pdev);
>
> - for (i = 0; i < variant->num_dai; i++) {
> - if (variant->num_dai > 1)
> - sprintf(clk_name, "mi2s-osr-clk%d", i);
> - else
> - sprintf(clk_name, "mi2s-osr-clk");
> + for (i = 0; i < LPASS_MAX_MI2S_PORTS; i++) {
> + sprintf(clk_name, "mi2s-osr-clk%d", i);
>
> drvdata->mi2s_osr_clk[i] = devm_clk_get(&pdev->dev,
> clk_name);
> @@ -427,19 +424,14 @@ int asoc_qcom_lpass_cpu_platform_probe(struct platform_device *pdev)
> }
> }
>
> - for (i = 0; i < variant->num_dai; i++) {
> -
> - if (variant->num_dai > 1)
> - sprintf(clk_name, "mi2s-bit-clk%d", i);
> - else
> - sprintf(clk_name, "mi2s-bit-clk");
> + for (i = 0; i < LPASS_MAX_MI2S_PORTS; i++) {
> + sprintf(clk_name, "mi2s-bit-clk%d", i);
>
> drvdata->mi2s_bit_clk[i] = devm_clk_get(&pdev->dev, clk_name);
> if (IS_ERR(drvdata->mi2s_bit_clk[i])) {
> dev_err(&pdev->dev,
> "%s() error getting mi2s-bit-clk: %ld\n",
> __func__, PTR_ERR(drvdata->mi2s_bit_clk[i]));
> - return PTR_ERR(drvdata->mi2s_bit_clk[i]);
> }
> }
> -----------------------><---------------------------------------------
>
More information about the Alsa-devel
mailing list