[alsa-devel] snd-aloop not working in linux-3.12.10
Srinivasan S
srinivasan.s at tataelxsi.co.in
Fri Mar 6 11:35:52 CET 2015
Once again many Thanks for the quick responses,
Could you please try & let me know whether does it works viceversa ie., arecord on loopback card first & then aplay on the loopback card as shown below
$ arecord -D plughw:3,1,0 -f dat -c 1 a.wav
Recording WAVE 'a.wav' : Signed 16 bit Little Endian, Rate 48000 Hz, Mono
$ aplay -D plughw:3,0,0 a.wav
Playing WAVE '/usr/share/sounds/alsa/Noise.wav' : Signed 16 bit Little
Endian, Rate 48000 Hz, Mono
Awaiting for your replies,
Thanks in advance again.
Srinivasan S
________________________________________
From: Jaroslav Kysela <perex at perex.cz>
Sent: Friday, March 6, 2015 12:21 AM
To: Srinivasan S
Cc: alsa-devel at alsa-project.org
Subject: Re: snd-aloop not working in linux-3.12.10
Dne 5.3.2015 v 17:42 Srinivasan S napsal(a):
> Thanks for your replies,
>
> I even tried in the below linux host machine first ie., ubuntu 12.04 prior trying in embedded board
> Linux srinivasan-Latitude-3440 3.13.0-43-generic #72~precise1-Ubuntu SMP Tue Dec 9 12:14:18 UTC 2014 x86_64 x86_64 x86_64 GNU/Linux
>
> am getting the below
>
>> card 1, device 0
>> card 1, device 1
>
> aplay -D hw:1,0,0 TangoForTajMusic11.wav
>
> arecord -D hw:1,1,0 record .wav
>
> Still this is not working in the linux host machine
>
> Could you please help me out in resolving this issue in host machine
On my host, kernel 3.17.8-200.fc20.x86_64, loopback card is #3:
$ aplay -D plughw:3,0,0 /usr/share/sounds/alsa/Noise.wav
Playing WAVE '/usr/share/sounds/alsa/Noise.wav' : Signed 16 bit Little
Endian, Rate 48000 Hz, Mono
$ arecord -D plughw:3,1,0 -f dat -c 1 a.wav
Recording WAVE 'a.wav' : Signed 16 bit Little Endian, Rate 48000 Hz, Mono
As you see, the "capture" program must set the same parameters as the
sample provider.
This also works:
$ alsaloop -C hw:3,1 -P plughw:1 -t 50000
The "plughw:1" is the real sound hardware in this case (first device,
second soundcard #1). The aplay command is same as in the first example
with device "plughw:3,0,0". In this case, the alsaloop detects the PCM
stream paramter changes automatically using the control API:
$ amixer -c 3 controls
numid=2,iface=PCM,name='PCM Notify'
numid=1,iface=PCM,name='PCM Rate Shift 100000'
numid=3,iface=PCM,name='PCM Slave Active'
numid=6,iface=PCM,name='PCM Slave Channels'
numid=4,iface=PCM,name='PCM Slave Format'
numid=5,iface=PCM,name='PCM Slave Rate'
numid=8,iface=PCM,name='PCM Notify',subdevice=1
numid=7,iface=PCM,name='PCM Rate Shift 100000',subdevice=1
numid=9,iface=PCM,name='PCM Slave Active',subdevice=1
Jaroslav
>
> Thanks in advance
>
>
>
> ________________________________________
> From: Jaroslav Kysela <perex at perex.cz>
> Sent: Thursday, March 5, 2015 7:43 PM
> To: Srinivasan S
> Cc: alsa-devel at alsa-project.org
> Subject: Re: snd-aloop not working in linux-3.12.10
>
> Dne 5.3.2015 v 14:45 Srinivasan S napsal(a):
>> Dear Jaroslav
>>
>> As this feature ie., snd-aloop designed by you, could you please redirect to the respective links where my queries can be posted & get the solutions for the problem
>
> No idea. It looks like you are asking for a commercial support.
> It may be a cache coherency issue or something else. The embedded/ARM
> platforms might behave completely differently than x86 on which
> this code was developed and tested.
>
> Jaroslav
>
>>
>> As we are trying to establish GSM two way calls via stereo codec
>>
>> We are planning to use loopback module (ie.,snd-aloop and alsaloop in ti sdk 7) to connect the sink/source and source/sink GSM and Codec.
>>
>> The below is the virtual devices created after configuring snd-aloop in the linux kernel 3.12.10
>>
>> card 0, device 0
>> card 0, device 1
>>
>> whatever am playing we are unable to record in the virtual device, but we are able to play & record with actual device
>>
>> aplay -D hw:0,0,0 play.wav
>> arecord -D hw:0,1,0 record.wav or alsaloop -C hw:0,1 -P hw:0,0 -t 50000 # second terminal, latency 50ms
>>
>> As per the logs below, am using the above commands to perform loopback, could you please let me know why am unable to perform the loopback with the below commands or please let me know am I missing any configurations,
>>
>> As this is feature is not working in ti sdk 7 (ie.,snd-aloop and alsaloop),
>>
>> Kindly requesting to try in your am335x-evm where it has tlv codec & verify this feature ie., snd-aloop & let me know as early as possible
>>
>>
>> logs :
>> ======
>> root at am335x-evm:/# ls /dev/snd/
>> by-path controlC1 pcmC0D0p pcmC0D1p pcmC1D0p
>> controlC0 pcmC0D0c pcmC0D1c pcmC1D0c timer
>> root at am335x-evm:/# cat /proc/asound/devices
>> 0: [ 0] : control
>> 16: [ 0- 0]: digital audio playback
>> 17: [ 0- 1]: digital audio playback
>> 24: [ 0- 0]: digital audio capture
>> 25: [ 0- 1]: digital audio capture
>> 32: [ 1] : control
>> 33: : timer
>> 48: [ 1- 0]: digital audio playback
>> 56: [ 1- 0]: digital audio capture
>> root at am335x-evm:/#
>>
>> Loopback device
>> ----------------
>> root at am335x-evm:/# aplay -l
>> **** List of PLAYBACK Hardware Devices ****
>> card 0: Loopback [Loopback], device 0: Loopback PCM [Loopback PCM]
>> Subdevices: 8/8
>> Subdevice #0: subdevice #0
>> Subdevice #1: subdevice #1
>> Subdevice #2: subdevice #2
>> Subdevice #3: subdevice #3
>> Subdevice #4: subdevice #4
>> Subdevice #5: subdevice #5
>> Subdevice #6: subdevice #6
>> Subdevice #7: subdevice #7
>> card 0: Loopback [Loopback], device 1: Loopback PCM [Loopback PCM]
>> Subdevices: 8/8
>> Subdevice #0: subdevice #0
>> Subdevice #1: subdevice #1
>> Subdevice #2: subdevice #2
>> Subdevice #3: subdevice #3
>> Subdevice #4: subdevice #4
>> Subdevice #5: subdevice #5
>> Subdevice #6: subdevice #6
>> Subdevice #7: subdevice #7
>> card 1: UDA1345TS [TI UDA1345TS], device 0: UDA134x uda134x-hifi-0 []
>> Subdevices: 1/1
>> Subdevice #0: subdevice #0
>> root at am335x-evm:/# aplay -D hw:0,0,0 TangoForTajMusic11.wav
>> Playing WAVE 'TangoForTajMusic11.wav' : Signed 16 bit Little Endian, Rate 48000 Hz, Stereo
>>
>>
>>
>> Actual device
>> -------------
>> root at am335x-evm:/# aplay -D hw:1,0,0 TangoForTajMusic11.wav
>> Playing WAVE 'TangoForTajMusic11.wav' : Signed 16 bit Li[ 2219.654309] DAVINCIIIIIIIIII UDA134XXXXX SYSCLK=12288000
>> ttle Endian, Rate 48000 Hz, Stereo
>> [ 2219.663776] DAVINCIIIIIIIIII UDA134XXXXX BCLK FREQQ=1536000
>> [ 2219.672880] DAVINCIIIIIIIIII UDA134XXXXX SYSCLK/BCLK_FREQ =8
>> [ 2219.678982] uda134x_hw_params CLOCKS uda134x_hw_params uda134x->sysclk: 12288000, params_rate(params):48000
>> [ 2219.689474] uda134x_hw_params FORMATS uda134x_hw_params dai_fmt: 16385, params_format:2
>> [ 2219.698095] uda134x_hw_params FORMATS uda134x_hw_params uda134x->sysclk / params_rate(params) 256
>> [ 2219.707644] UDA1345TSSSSSSSSSSSS SYSCLK / fs ratio is 256
>> [ 2219.713470] uda134x_hw_params dai_fmt: 16385, params_format:2
>> [ 2219.719639] UDA1345TSSSSSSSSSSSS FORMAT SND_SOC_DAIFMT_I2S
>> [ 2219.725716] ENTERED davinci_config_channel_size davinci_config_channel_size: tx_rotate = 4
>> [ 2219.734620] ENTERED davinci_config_channel_size davinci_config_channel_size: MASK= 65535
>> [ 2219.748324] uda134x_unnnnnnnnmuteeeeeeeeee uda134x_mute mute: 0
>> [ 2219.756522] davinci_mcasp_starttttttttttttttttttttt SNDRV_PCM_STREAM_PLAYBACK
>>
>>
>> Kindly do the needful as early as possible
>> Awaiting for your replies,
>>
>> Many Thanks in advance,
>
>
> --
> Jaroslav Kysela <perex at perex.cz>
> Linux Kernel Sound Maintainer
> ALSA Project; Red Hat, Inc.
>
--
Jaroslav Kysela <perex at perex.cz>
Linux Kernel Sound Maintainer
ALSA Project; Red Hat, Inc.
More information about the Alsa-devel
mailing list