[alsa-devel] Need help with Behringer Firepower FCA610 profile

[Raymond Yau]

>>  >
>>  > I'd prefer a multi-purpose configuration with multiple
>> sinks/sources:
>>  >
>>  > - Source 'DAW':                   aux1,aux2,aux3,aux4,aux5,aux6
>>  > - Source 'Mic/Instrument':        channel 0/1 = left/right
>>  > - Source 'Line':                  channel 2/3 = left/right
>>  > - Source 'S/PDIF'                 channel 4/5 = left/right
>>  > - Source 'TV'                     channel 4/5 = left/right
>> (=S/PDIF)
>>  >
>>  > - Sink   'DAW':
>> aux1,aux2,aux3,aux4,aux5,aux6,aux7,aux8,aux9,aux10
>>  > - Sink   'Stereo1/Headphone A':   channel 0/1 = left/right
>>  > - Sink   'Stereo2/Headphone B':   channel 2/3 = left/right
>>  > - Sink   'Stereo3':               channel 4/5 = left/right
>>  > - Sink   'Stereo4':               channel 6/7 = left/right
>>  > - Sink   'Stereo5/SPDIF':         channel 8/9 = left/right
>>  > - Sink   'Surround 7.1':          front-left, front-right,
>> rear-left, rear-right, center, lfe, side-left, side-right
>>  > - Sink   'Surround 7.1 -> 5.0':   front-left, front-right,
>> rear-left, rear-right, center, lfe -> front-left + front-right,
>> side-left -> front-left + rear-left, side-right -> front-right +
>> rear-right
>>
>>
http://cgit.freedesktop.org/pulseaudio/pulseaudio/plain/src/modules/alsa/mixer/profile-sets/native-instruments-traktor-audio10.conf
>> [1]
>>
>>
>> Pulseaudio only support different device
>>
>> If your driver only have simgle device for 10 channel playback and 6
>> channel capture
>
>
> ALSA provides the following hardware-devices/plugs:
>
> - sysdefault:CARD=FCA610
> - front:CARD=FCA610,DEV=0
> - surround21:CARD=FCA610,DEV=0
> - surround40:CARD=FCA610,DEV=0
> - surround41:CARD=FCA610,DEV=0
> - surround50:CARD=FCA610,DEV=0
> - surround51:CARD=FCA610,DEV=0
> - surround71:CARD=FCA610,DEV=0
> - iec958:CARD=FCA610,DEV=0
> - dmix:CARD=FCA610,DEV=0
> - dsnoop:CARD=FCA610,DEV=0
> - hw:CARD=FCA610,DEV=0
> - plughw:CARD=FCA610,DEV=0

Are you sure that those devices really work ?