[alsa-devel] [PATCH] mips/ad1843: convert time to jiffies HZ independent

[Takashi Iwai]

At Sun, 14 Jun 2015 10:20:59 +0200,
Nicholas Mc Guire wrote:
> 
> PI compliance scanning with coccinelle flagged:
> ./sound/mips/ad1843.c:503:2-32: WARNING: 
> 	timeout (5) seems HZ dependent
> 
> This was introduced in 'commit 862c2c0a61c5 ("ALSA: ALSA driver for SGI O2
> audio board")'. schedule_timeout_interruptible() expects a timeout in
> jiffies so the numeric constant makes the effective timeout HZ dependent.
> Simply put it through msecs_to_jiffies() to make it HZ independent.
> 
> Signed-off-by: Nicholas Mc Guire <hofrat at osadl.org>
> ---
> 
> The loop here is bounded by 500 jiffies and it does not seem reasonable that
> it would loop 10 times faster on HZ=1000 configs over HZ=100 configs. The
> conversion via msecs_to_jiffies(5) ensures that it will loop at most 100
> times for all configs of HZ which seems reasonable (to me) but needs to be
> checked by someone that knows the details of this driver. 

Using 5ms looks reasonable for this case.  However,
schedule_timeout_interruptible() isn't.  This is a loop that won't
break.  So, the best would be to replace it with msleep() or its
friends.

> Note that the CONFIG_SND_PCM_OSS dependency was not listed in the 
> Depends on: in Kconfig (which it probably should)

Why at all?  It has nothing to do with OSS.


thanks,

Takashi


> Patch was compile tested with ip32_defconfig + CONFIG_SOUND=m,
> CONFIG_SND=m, CONFIG_SND_PCM_OSS=y, CONFIG_SND_SGI_O2=m
> 
> Patch is against 4.1-rc7 (localversion-next is -next-20150612)
> 
>  sound/mips/ad1843.c |    2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/sound/mips/ad1843.c b/sound/mips/ad1843.c
> index 5869075..ec22b55 100644
> --- a/sound/mips/ad1843.c
> +++ b/sound/mips/ad1843.c
> @@ -500,7 +500,7 @@ int ad1843_init(struct snd_ad1843 *ad1843)
>  			       "ad1843: AD1843 won't power up\n");
>  			return -EIO;
>  		}
> -		schedule_timeout_interruptible(5);
> +		schedule_timeout_interruptible(msecs_to_jiffies(5));
>  	}
>  
>  	/* 5. Power up the clock generators and enable clock output pins. */
> -- 
> 1.7.10.4
>