[alsa-devel] [PATCH 2/4] ASoC: wm8960: support configure headphone jack detect pin and polarity from device tree

[Charles Keepax]

On Thu, Jun 11, 2015 at 07:14:34PM +0800, Zidan Wang wrote:
> The ADCLRC/GPIO1, LINPUT3/JD2 and RINPUT3/JD3 pins can be selected as
> headphone jack detect inputs to automatically disable the speaker output
> and enable the headphone.
> 
> Signed-off-by: Zidan Wang <zidan.wang at freescale.com>
> ---

This feels like this is missing some iteraction with DAPM, there
are DAPM widgets that represent both the Speaker and the
Headphone, in the case this feature is in use the power state
DAPM shows may no longer accurately reflects the actual power
state of the device.

That said I have no idea if the registers update on the chip to
reflect this change (my guess is that they don't). I am not
really sure what the correct way to handle this sort of hardware
output switching would be in DAPM.

Thanks,
Charles