[alsa-devel] [PATCH] ALSA: hda - remove controller dependency on i915 power well for SKL

[Takashi Iwai]

At Wed,  3 Jun 2015 09:30:15 +0800,
libin.yang at intel.com wrote:
> 
> From: Libin Yang <libin.yang at intel.com>
> 
> For SKL, only the HDMI codec is in the display power well while the
> HD-A controller isn't. So the controller flag 'need_i915_power' is
> not set to release the display power after probe, and the codec flag
> 'link_power_control" is set to request/release the display power via
> bus link_power ops.
> 
> Signed-off-by: Libin Yang <libin.yang at intel.com>

Applied, thanks.


Takashi

> ---
>  sound/pci/hda/hda_intel.c  | 9 +++++++--
>  sound/pci/hda/patch_hdmi.c | 2 +-
>  2 files changed, 8 insertions(+), 3 deletions(-)
> 
> diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c
> index 391e4f8..e5597fd 100644
> --- a/sound/pci/hda/hda_intel.c
> +++ b/sound/pci/hda/hda_intel.c
> @@ -345,6 +345,11 @@ enum {
>  #define use_vga_switcheroo(chip)	0
>  #endif
>  
> +#define CONTROLLER_IN_GPU(pci) (((pci)->device == 0x0a0c) || \
> +					((pci)->device == 0x0c0c) || \
> +					((pci)->device == 0x0d0c) || \
> +					((pci)->device == 0x160c))
> +
>  static char *driver_short_names[] = {
>  	[AZX_DRIVER_ICH] = "HDA Intel",
>  	[AZX_DRIVER_PCH] = "HDA Intel PCH",
> @@ -1976,8 +1981,8 @@ static int azx_probe_continue(struct azx *chip)
>  	 * display codec needs the power and it can be released after probe.
>  	 */
>  	if (chip->driver_caps & AZX_DCAPS_I915_POWERWELL) {
> -		/* Baytral/Braswell controllers don't need this power */
> -		if (pci->device != 0x0f04 && pci->device != 0x2284)
> +		/* HSW/BDW controllers need this power */
> +		if (CONTROLLER_IN_GPU(pci))
>  			hda->need_i915_power = 1;
>  
>  		err = snd_hdac_i915_init(bus);
> diff --git a/sound/pci/hda/patch_hdmi.c b/sound/pci/hda/patch_hdmi.c
> index 73c20c0..407978b 100644
> --- a/sound/pci/hda/patch_hdmi.c
> +++ b/sound/pci/hda/patch_hdmi.c
> @@ -2339,7 +2339,7 @@ static int patch_generic_hdmi(struct hda_codec *codec)
>  	 * can cover the codec power request, and so need not set this flag.
>  	 * For previous platforms, there is no such power well feature.
>  	 */
> -	if (is_valleyview_plus(codec))
> +	if (is_valleyview_plus(codec) || is_skylake(codec))
>  		codec->core.link_power_control = 1;
>  
>  	if (is_haswell_plus(codec) || is_valleyview_plus(codec))
> -- 
> 1.9.1
>