[alsa-devel] [PATCH 3/4] ARM: dts: rockchip: Add SPDIF transceiver for RK3188

[Heiko Stübner]

Hi,

Am Dienstag, 28. Juli 2015, 14:03:30 schrieb Sjoerd Simons:
> Add the SPDIF transceiver controller and pin for RK3188
> 
> Signed-off-by: Sjoerd Simons <sjoerd.simons at collabora.co.uk>
> ---
>  arch/arm/boot/dts/rk3188.dtsi | 22 ++++++++++++++++++++++
>  1 file changed, 22 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/rk3188.dtsi b/arch/arm/boot/dts/rk3188.dtsi
> index 0f23aed..43e9bdf 100644
> --- a/arch/arm/boot/dts/rk3188.dtsi
> +++ b/arch/arm/boot/dts/rk3188.dtsi
> @@ -121,6 +121,22 @@
>  		status = "disabled";
>  	};
> 
> +	spdif: spdif at 0x1011e000 {

node names without 0x -> "spdif at 1011e000"


> +		compatible = "rockchip,rk3188-spdif", "rockchip,rk3066-spdif";
> +		reg = <0x1011e000 0x2000>;
> +		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&spdif_tx>;
> +		dmas = <&dmac1_s 8>;
> +		dma-names = "tx";
> +		clock-names = "spdif_hclk", "spdif_clk";
> +		clocks = <&cru HCLK_SPDIF>, <&cru SCLK_SPDIF>;
> +		status = "disabled";
> +		#sound-dai-cells = <0>;

if you're submitting a v2, could you try ordering stuff like this?

+		compatible = "rockchip,rk3188-spdif", "rockchip,rk3066-spdif";
+		reg = <0x1011e000 0x2000>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		#sound-dai-cells = <0>;
+		clock-names = "spdif_hclk", "spdif_clk";
+		clocks = <&cru HCLK_SPDIF>, <&cru SCLK_SPDIF>;
+		dmas = <&dmac1_s 8>;
+		dma-names = "tx";
+		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&spdif_tx>;
+		status = "disabled";

The ordering I try to keep is "compatible", "reg", [everything else sorted 
alphabetically], "status"

> +	};
> +
>  	cru: clock-controller at 20000000 {
>  		compatible = "rockchip,rk3188-cru";
>  		reg = <0x20000000 0x1000>;
> @@ -462,6 +478,12 @@
>  						<RK_GPIO1 21 RK_FUNC_1 &pcfg_pull_none>;
>  			};
>  		};
> +
> +		spdif {
> +			spdif_tx: spdif-tx {
> +				rockchip,pins = <RK_GPIO1 14 RK_FUNC_1 &pcfg_pull_none>;
> +			};
> +		};
>  	};
>  };