[alsa-devel] [PATCH 1/2] ASoC: rt5645: Update dapm pins when the card is not instantiated yet

Nicolas Boichat drinkcat at chromium.org
Thu Jul 16 07:42:33 CEST 2015


This makes sure the dapm state is consistent when the card is
instantiated.

However, if the card is not instantiated yet, we still update the
registers manually in the "jack in" case, so that we can immediately
report if a mic is present or not.

Disabling "Mic Det Power" after detection, and on jack out, can
wait until the card gets instantiated.

Signed-off-by: Nicolas Boichat <drinkcat at chromium.org>
---
 sound/soc/codecs/rt5645.c | 36 +++++++++++-------------------------
 1 file changed, 11 insertions(+), 25 deletions(-)

diff --git a/sound/soc/codecs/rt5645.c b/sound/soc/codecs/rt5645.c
index 093a41d..a56bca6 100644
--- a/sound/soc/codecs/rt5645.c
+++ b/sound/soc/codecs/rt5645.c
@@ -2805,12 +2805,11 @@ static int rt5645_jack_detect(struct snd_soc_codec *codec, int jack_insert)
 	if (jack_insert) {
 		regmap_write(rt5645->regmap, RT5645_CHARGE_PUMP, 0x0006);
 
-		if (codec->component.card->instantiated) {
-			/* for jack type detect */
-			snd_soc_dapm_force_enable_pin(dapm, "LDO2");
-			snd_soc_dapm_force_enable_pin(dapm, "Mic Det Power");
-			snd_soc_dapm_sync(dapm);
-		} else {
+		/* for jack type detect */
+		snd_soc_dapm_force_enable_pin(dapm, "LDO2");
+		snd_soc_dapm_force_enable_pin(dapm, "Mic Det Power");
+		snd_soc_dapm_sync(dapm);
+		if (!dapm->card->instantiated) {
 			/* Power up necessary bits for JD if dapm is
 			   not ready yet */
 			regmap_update_bits(rt5645->regmap, RT5645_PWR_ANLG1,
@@ -2841,12 +2840,8 @@ static int rt5645_jack_detect(struct snd_soc_codec *codec, int jack_insert)
 				rt5645_enable_push_button_irq(codec, true);
 			}
 		} else {
-			if (codec->component.card->instantiated) {
-				snd_soc_dapm_disable_pin(dapm, "Mic Det Power");
-				snd_soc_dapm_sync(dapm);
-			} else
-				regmap_update_bits(rt5645->regmap,
-					RT5645_PWR_VOL, RT5645_PWR_MIC_DET, 0);
+			snd_soc_dapm_disable_pin(dapm, "Mic Det Power");
+			snd_soc_dapm_sync(dapm);
 			rt5645->jack_type = SND_JACK_HEADPHONE;
 		}
 
@@ -2855,19 +2850,10 @@ static int rt5645_jack_detect(struct snd_soc_codec *codec, int jack_insert)
 		if (rt5645->en_button_func)
 			rt5645_enable_push_button_irq(codec, false);
 		else {
-			if (codec->component.card->instantiated) {
-				if (rt5645->pdata.jd_mode == 0)
-					snd_soc_dapm_disable_pin(dapm, "LDO2");
-				snd_soc_dapm_disable_pin(dapm, "Mic Det Power");
-				snd_soc_dapm_sync(dapm);
-			} else {
-				if (rt5645->pdata.jd_mode == 0)
-					regmap_update_bits(rt5645->regmap,
-						RT5645_PWR_MIXER,
-						RT5645_PWR_LDO2, 0);
-				regmap_update_bits(rt5645->regmap,
-					RT5645_PWR_VOL, RT5645_PWR_MIC_DET, 0);
-			}
+			if (rt5645->pdata.jd_mode == 0)
+				snd_soc_dapm_disable_pin(dapm, "LDO2");
+			snd_soc_dapm_disable_pin(dapm, "Mic Det Power");
+			snd_soc_dapm_sync(dapm);
 		}
 	}
 
-- 
2.4.3.573.g4eafbef



More information about the Alsa-devel mailing list