[alsa-devel] [PATCH] ASoC: rx51: do not fail if could not get jack detection gpio

[Pavel Machek]

On Tue 2015-01-27 15:27:58, Peter Ujfalusi wrote:
> Hi,
> 
> On 01/26/2015 10:51 PM, Pali Rohár wrote:
> > qemu does not emulate it
> 
> Not sure about this... How does qemu emulate tlv320aic3106, tpa6130a2a, McBSP,
> sDMA for audio to work? What about the other three GPIOs in this machine driver?
> 
> The "nokia,n900-audio" compatible mandates that the jack-detection GPIO must
> be provided (Documentation/devicetree/bindings/sound/nokia,rx51.txt) since it
> means that the driver is running on the Nokia n900 HW.

Fix the documentation, then :-). [Actually, GPIO is provided, it just
can't be requested, AFAICT.]

It is quite important to keep qemu working, really. Debugging early
boot on hardware is very hard, for example.

And yes, some day we may need different dts for n900-qemu
(vs. n900-hw), but lets not do it just yet.
							Pavel

> 
> > Signed-off-by: Pali Rohár <pali.rohar at gmail.com>
> > ---
> >  sound/soc/omap/rx51.c |   45 +++++++++++++++++++++++++--------------------
> >  1 file changed, 25 insertions(+), 20 deletions(-)
> > 
> > diff --git a/sound/soc/omap/rx51.c b/sound/soc/omap/rx51.c
> > index 04896d6..a689021 100644
> > --- a/sound/soc/omap/rx51.c
> > +++ b/sound/soc/omap/rx51.c
> > @@ -310,25 +310,27 @@ static int rx51_aic34_init(struct snd_soc_pcm_runtime *rtd)
> >  		return err;
> >  	}
> >  
> > -	/* AV jack detection */
> > -	err = snd_soc_jack_new(codec, "AV Jack",
> > -			       SND_JACK_HEADSET | SND_JACK_VIDEOOUT,
> > -			       &rx51_av_jack);
> > -	if (err) {
> > -		dev_err(card->dev, "Failed to add AV Jack\n");
> > -		return err;
> > -	}
> > +	if (!IS_ERR(pdata->jack_detection_gpio)) {
> > +		/* AV jack detection */
> > +		err = snd_soc_jack_new(codec, "AV Jack",
> > +				       SND_JACK_HEADSET | SND_JACK_VIDEOOUT,
> > +				       &rx51_av_jack);
> > +		if (err) {
> > +			dev_err(card->dev, "Failed to add AV Jack\n");
> > +			return err;
> > +		}
> >  
> > -	/* prepare gpio for snd_soc_jack_add_gpios */
> > -	rx51_av_jack_gpios[0].gpio = desc_to_gpio(pdata->jack_detection_gpio);
> > -	devm_gpiod_put(card->dev, pdata->jack_detection_gpio);
> > +		/* prepare gpio for snd_soc_jack_add_gpios */
> > +		rx51_av_jack_gpios[0].gpio = desc_to_gpio(pdata->jack_detection_gpio);
> > +		devm_gpiod_put(card->dev, pdata->jack_detection_gpio);
> >  
> > -	err = snd_soc_jack_add_gpios(&rx51_av_jack,
> > -				     ARRAY_SIZE(rx51_av_jack_gpios),
> > -				     rx51_av_jack_gpios);
> > -	if (err) {
> > -		dev_err(card->dev, "Failed to add GPIOs\n");
> > -		return err;
> > +		err = snd_soc_jack_add_gpios(&rx51_av_jack,
> > +					     ARRAY_SIZE(rx51_av_jack_gpios),
> > +					     rx51_av_jack_gpios);
> > +		if (err) {
> > +			dev_err(card->dev, "Failed to add GPIOs\n");
> > +			return err;
> > +		}
> >  	}
> >  
> >  	return err;
> > @@ -336,8 +338,11 @@ static int rx51_aic34_init(struct snd_soc_pcm_runtime *rtd)
> >  
> >  static int rx51_card_remove(struct snd_soc_card *card)
> >  {
> > -	snd_soc_jack_free_gpios(&rx51_av_jack, ARRAY_SIZE(rx51_av_jack_gpios),
> > -				rx51_av_jack_gpios);
> > +	struct rx51_audio_pdata *pdata = snd_soc_card_get_drvdata(card);
> > +
> > +	if (!IS_ERR(pdata->jack_detection_gpio))
> > +		snd_soc_jack_free_gpios(&rx51_av_jack, ARRAY_SIZE(rx51_av_jack_gpios),
> > +					rx51_av_jack_gpios);
> >  
> >  	return 0;
> >  }
> > @@ -470,8 +475,8 @@ static int rx51_soc_probe(struct platform_device *pdev)
> >  	pdata->jack_detection_gpio = devm_gpiod_get(card->dev,
> >  						    "jack-detection");
> >  	if (IS_ERR(pdata->jack_detection_gpio)) {
> > +		/* Do not fail, qemu does not emulate jack detection gpio */
> >  		dev_err(card->dev, "could not get jack detection gpio\n");
> > -		return PTR_ERR(pdata->jack_detection_gpio);
> >  	}
> >  
> >  	pdata->eci_sw_gpio = devm_gpiod_get(card->dev, "eci-switch");
> > 
> 
> 

-- 
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html