[alsa-devel] [PATCH_V2 0/4] sound:soc: jz4740: DT, dynamic sampling, enable clocks

[Zubair Lutfullah Kakakhel]

Hi,

Here are a few simple patches for the jz4740.

First adds dynamic sampling support to jz4740-i2s.
Then two to add a simple binding and DT support.
Then a patch to set the clock rate for i2s.

These are in preparation for jz4780 and ci20 later on.

Patches are based on 3.19-rc6. Quite disjoint and stay within jz4740 
so should apply easily on other trees.

If you would like to have them rebased to a different tree, please tell.

Thank-you

V2 changes: 
Removed a redundant #define
Added #ifdef CONFIG_OF
Added dma in binding document
Removed a redundant call to clk_prepare_enable

Zubair Lutfullah Kakakhel (4):
  sound: soc: jz4740: Add dynamic sampling rate support to jz4740-i2s
  dt: sound: jz4740: Add binding documentation for jz4740-i2s
  sound: soc: jz4740: Add DT support to jz4740-i2s driver
  sound: jz4740: set i2s clk rate to 12MHz

 .../bindings/sound/ingenic,jz4740-i2s.txt          | 21 +++++++++++++++++++++
 sound/soc/jz4740/jz4740-i2s.c                      | 22 +++++++++++++++++++++-
 2 files changed, 42 insertions(+), 1 deletion(-)
 create mode 100644 Documentation/devicetree/bindings/sound/ingenic,jz4740-i2s.txt

-- 
1.9.1