[alsa-devel] [PATCH v2] ASoC: OMAP: mcbsp: ensure that CLKX and CLKR are not used as ouput pins when they are used as input clock for the SRG.
Peter Ujfalusi
peter.ujfalusi at ti.com
Tue Jan 20 09:47:55 CET 2015
On 01/19/2015 11:24 PM, Thomas Niederprüm wrote:
> This patch fixes faulty behaviour in a setup where the input clock for the
> SRG is fed through the CLKR/CLKX pin but the McBSP is configured to be
> master (SND_SOC_DAIFMT_CBS_CFS). In that case of course CLKR/CLKX must
> not be configured as output pin. Otherwise the input clock is messed up
> horribly.
>
> This patch makes it possible to use the CLKR/CLKX pin rather than CLKS to
> inject a reference clock in setups where McBSP is master and not both
> rx and tx are used. However for this to work it has to be ensured that
> set_dai_sysclk() is called after set_dai_fmt().
>
> This was tested on a beagleboard-xm using McBSP1 to drive a i2s DAC through
> the tx lines (CLKX,FSX,DX). Using this patch the CLKR pin is used to inject
> an external reference clock.
>
> changes since v1:
> - added comments explaining the bit masking to disable output on CLKR/CLKX
Acked-by: Peter Ujfalusi <peter.ujfalusi at ti.com>
>
> Signed-off-by: Thomas Niederprüm <niederp at physik.uni-kl.de>
> ---
> sound/soc/omap/omap-mcbsp.c | 11 +++++++++++
> 1 file changed, 11 insertions(+)
>
> diff --git a/sound/soc/omap/omap-mcbsp.c b/sound/soc/omap/omap-mcbsp.c
> index bd3ef2a..c37f606 100644
> --- a/sound/soc/omap/omap-mcbsp.c
> +++ b/sound/soc/omap/omap-mcbsp.c
> @@ -530,8 +530,19 @@ static int omap_mcbsp_dai_set_dai_sysclk(struct snd_soc_dai *cpu_dai,
>
> case OMAP_MCBSP_SYSCLK_CLKX_EXT:
> regs->srgr2 |= CLKSM;
> + regs->pcr0 |= SCLKME;
> + /*
> + * If McBSP is master but yet the CLKX/CLKR pin drives the SRG,
> + * disable output on those pins. This enables to inject the
> + * reference clock through CLKX/CLKR. For this to work
> + * set_dai_sysclk() _needs_ to be called after set_dai_fmt().
> + */
> + regs->pcr0 &= ~CLKXM;
> + break;
> case OMAP_MCBSP_SYSCLK_CLKR_EXT:
> regs->pcr0 |= SCLKME;
> + /* Disable ouput on CLKR pin in master mode */
> + regs->pcr0 &= ~CLKRM;
> break;
> default:
> err = -ENODEV;
>
--
Péter
More information about the Alsa-devel
mailing list